[DEVICE] SimpleRigResetter - Auto reboot crashed rigs - Extension Boards !!!

[tytanick]

Shipping Rates for Cape Town, South Africa?

At the beginning i will have only Europe, Usa, Russia, China and then i will open stopre.
Propably tomorrow becasue today i need to spend whole time on different thing (my normal company stuff not related to SimpleMining)
Then i will do whole Asia, Africa and Australia + islands. Propably i will do this when someone will ask me (it will speedup this process)

Its takes a lot of time to create rates.
- first i need to find all 3 code countries for specific continent
- Then i need to check if every country from that list is for sure in my Post Office service.
- Then i need to create few price steps, and check every price for each step, <2KG, <5KG, <10KG, <15KG, <20KG + shipping days more less
- then the same with Courier DHL/UPS which will take even more of time
- Then i need to import big CSV file and only then its working

This is why its taking so much time to prepare store
And charging flat $ rate  for shipoing would be unfair because some countries have cheap shipping while others very expensive.

Please be patient - Hardware will be ready in atleast 7-10 days from now so shop can wait little bit longer

[1714020728]

1714020728

[1714020728]

1714020728

[1714020728]

1714020728

[m1n1ngP4d4w4n]

Shipping Rates for Cape Town, South Africa?

At the beginning i will have only Europe, Usa, Russia, China and then i will open stopre.
Propably tomorrow becasue today i need to spend whole time on different thing (my normal company stuff not related to SimpleMining)
Then i will do whole Asia, Africa and Australia + islands. Propably i will do this when someone will ask me (it will speedup this process)

Its takes a lot of time to create rates.
- first i need to find all 3 code countries for specific continent
- Then i need to check if every country from that list is for sure in my Post Office service.
- Then i need to create few price steps, and check every price for each step, <2KG, <5KG, <10KG, <15KG, <20KG + shipping days more less
- then the same with Courier DHL/UPS which will take even more of time
- Then i need to import big CSV file and only then its working

This is why its taking so much time to prepare store
And charging flat $ rate  for shipoing would be unfair because some countries have cheap shipping while others very expensive.

Please be patient - Hardware will be ready in atleast 7-10 days from now so shop can wait little bit longer

That may help for your item #1, this is what i use in different projects

http://data.okfn.org/data/core/country-codes

look @ data field column 5 for ISO3166-1-Alpha-3 (country code 3 char) and column 22 for Continent code.

Keep up the good work and good luck !

[tytanick]

http://data.okfn.org/data/core/country-codes

look @ data field column 5 for ISO3166-1-Alpha-3 (country code 3 char) and column 22 for Continent code.

Keep up the good work and good luck !

I have this list. More time consimming is segregating all countries to Asia, To Oceanic islands, South America, North America, Central America, Africa.
Anyway i will release what i have and i will be adding next in realtime *

[m1n1ngP4d4w4n]

http://data.okfn.org/data/core/country-codes

look @ data field column 5 for ISO3166-1-Alpha-3 (country code 3 char) and column 22 for Continent code.

Keep up the good work and good luck !

I have this list. More time consimming is segregating all countries to Asia, To Oceanic islands, South America, North America, Central America, Africa.
Anyway i will release what i have and i will be adding next in realtime *

Oh ok, i though column 22 would help you do the sorting by continent, sorry it doesn't help    Good work and good luck with shop !

[tytanick]

Anyway it is better than i had
Thx

[tytanick]

TOMORROW THERE WILL BE LINK to store where you can preorder SimpleRigResetter.
Today All users registered in SimpleMining OS already received those informations as a head start bonus.
Tomorrow i will post here link to preorder store. Please guys who know the address, dont post it till tomorrow.

Still renember that shipping will start 1-20 February ! so in 2-4 weeks !

[citronick]

Just submitted my confirmed order - please check email.

Can I use power supply adapter rated 12v 5A ?

[tytanick]

Just submitted my confirmed order - please check email.

Can I use power supply adapter rated 12v 5A ?

Yes sure.
It must be in range of 12v to 24v and it must be at least 24watt. So it can be 5Ampere.
12v * 5A = 60 watt.
More important is if the connector is 5.5 mm x 2.5 mm
Anyway if it wont fir, you can always go to local RTV store.

[tytanick]

PRE ORDERS ARE NOW OPEN for all.

But renember that shipping rates are still configured only for Europe, and Rest of world i will be adding in 3-14 days.
Right now i also have big deployment going on in my company - not related to SimpleMining.
Still dont worry, there is plenty of devices available for cheaper preorder price so all interested should get it on time.


https://shop.simplemining.net/

[tytanick]

SHIPPING RATES are configured for World Wide.
Atleast most of them

[mettalmag]

Does any one bought one yet ? Can't wait for a review.
Actually until I was waiting for this I came up with my own idea how to manage it remotely with much less cost and some welding skills and this is the reason why I didn't took a part in pre orders.

[tytanick]

Does any one bought one yet ? Can't wait for a review.
Actually until I was waiting for this I came up with my own idea how to manage it remotely with much less cost and some welding skills and this is the reason why I didn't took a part in pre orders.

I will start sending 1-20 February, so nobody beside me have it
When you weld, remember that electric isolation of each rig is important. Mine device have opto transistors in it. So no way to burn rigs.

[mettalmag]

Does any one bought one yet ? Can't wait for a review.
Actually until I was waiting for this I came up with my own idea how to manage it remotely with much less cost and some welding skills and this is the reason why I didn't took a part in pre orders.

I will start sending 1-20 February, so nobody beside me have it
When you weld, remember that electric isolation of each rig is important. Mine device have opto transistors in it. So no way to burn rigs.

Honestly I prefer your devise because it's smaller and professionally made rather than mine.
But Also in my case there actually is nothing to burn. I'll find the topic and PM it, your opinion would be much appreciated.

[tytanick]

Does any one bought one yet ? Can't wait for a review.
Actually until I was waiting for this I came up with my own idea how to manage it remotely with much less cost and some welding skills and this is the reason why I didn't took a part in pre orders.

I will start sending 1-20 February, so nobody beside me have it
When you weld, remember that electric isolation of each rig is important. Mine device have opto transistors in it. So no way to burn rigs.

Honestly I prefer your devise because it's smaller and professionally made rather than mine.
But Also in my case there actually is nothing to burn. I'll find the topic and PM it, your opinion would be much appreciated.

First of oll, congrats for making and figuring this out
Yeah. Mine project first was just "my need" for not driving every few days to different locations
And then i saw that there is no such device after all
5 years of mining, 5 years of wasting time and still no device? Thats odd right ?

[tytanick]

Boards will be fully ready on Monday.
Only we are still making cables with diffrent lenghts.

Many guys asks about cheaper shipping.
I will add economic long 15-30 days shippings but in 1-3 weeks depending on free time.

Anyway three photos for you guys
How looks Board when its night.
Also i added termo elastic to cables to look more nice.
And also Application screenshot.

[citronick]

Boards will be fully ready on Monday.
Only we are still making cables with diffrent lenghts.

Many guys asks about cheaper shipping.
I will add economic long 15-30 days shippings but in 1-3 weeks depending on free time.

Anyway three photos for you guys
How looks Board when its night.
Also i added termo elastic to cables to look more nice.
And also Application screenshot.
<x>

How does the "Instruction manual" look like?

I am using the SRR in conjunction with your Simple Mining OS.

[tytanick]

How does the "Instruction manual" look like?
I am using the SRR in conjunction with your Simple Mining OS.

Honestly ? As now it looks like blank page
I will be writing this in next week but it is not complicated :p
There will be instruction
- how to connect rigs to SRR
- how to install and configure SRR Agent on windows/linux
- how to use SRR Tool

Nothing complicated. Alyway there wont be Paper instruction but PDF one with as many pictures as i can

[xleejohnx]

Does any one bought one yet ? Can't wait for a review.
Actually until I was waiting for this I came up with my own idea how to manage it remotely with much less cost and some welding skills and this is the reason why I didn't took a part in pre orders.

I can give it a full review once it comes in

[supersonic]

Looks promising, already preordered.
Dobry pomysł :>

[citronick]

Hi Tytanick,

Just curious, will your SMos have the watchdog agent installed and polling the SRR by default? Or do we need to install it separately?

I am assuming from the GUI, that you can set values in seconds to initiate reboot at rig if no heartbeat after x seconds/minutes.

Since the SRR basically takes over the on/off switch -- can I issue a command to power off the rig, and power on after 5 minutes?

Thanks