Bitcoin Forum
December 14, 2017, 11:34:46 PM *
News: Latest stable version of Bitcoin Core: 0.15.1  [Torrent].
 
   Home   Help Search Donate Login Register  
Pages: « 1 ... 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 [2048] 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 ... 2138 »
  Print  
Author Topic: Swedish ASIC miner company kncminer.com  (Read 3029944 times)
GenTarkin
Legendary
*
Offline Offline

Activity: 2170


View Profile
August 14, 2015, 06:28:43 PM
 #40941

Alright, do perform a git pull n test it out.
Basically, if I have it set correctly, Ive modified KNC's loop to see if either DCDC are supplying current, if so then it doesnt kick it over to my loop(the custom resetting loop)

If all is correct, it will only kick over to my custom reset loop when both dcdc's on a die are registering current below the threshold of 5 amps.

GenTarkin's MOD Kncminer Titan custom firmware! v1.0.4! <--- CLICK HERE
Donations: bitcoin- 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At || litecoin- LYXrLis3ik6TRn8tdvzAyJ264DRvwYVeEw
1513294486
Hero Member
*
Offline Offline

Posts: 1513294486

View Profile Personal Message (Offline)

Ignore
1513294486
Reply with quote  #2

1513294486
Report to moderator
1513294486
Hero Member
*
Offline Offline

Posts: 1513294486

View Profile Personal Message (Offline)

Ignore
1513294486
Reply with quote  #2

1513294486
Report to moderator
1513294486
Hero Member
*
Offline Offline

Posts: 1513294486

View Profile Personal Message (Offline)

Ignore
1513294486
Reply with quote  #2

1513294486
Report to moderator
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1513294486
Hero Member
*
Offline Offline

Posts: 1513294486

View Profile Personal Message (Offline)

Ignore
1513294486
Reply with quote  #2

1513294486
Report to moderator
TXSteve
Sr. Member
****
Offline Offline

Activity: 341


View Profile
August 14, 2015, 06:32:55 PM
 #40942

Alright, do perform a git pull n test it out.
Basically, if I have it set correctly, Ive modified KNC's loop to see if either DCDC are supplying current, if so then it doesnt kick it over to my loop(the custom resetting loop)

If all is correct, it will only kick over to my custom reset loop when both dcdc's on a die are registering current below the threshold of 5 amps.

ok, I'll check it now
Phoenix1969
Legendary
*
Offline Offline

Activity: 938


LIR DEV


View Profile
August 14, 2015, 06:56:29 PM
 #40943

http://www.kncminer.com/blog/newsarchive

I guess they will find out how worthless the xapo card is...   hahahaha


                     ▀▀█████████▀████████████████▄
                        ████▄      ▄████████████████
                     ▄██████▀  ▄  ███████████████████
                  ▄█████████▄████▄███████████████████
                ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀████████
                                               ▀▀███▀
    ▄█▀█       ▄▀  ▄▀▀█  ▄▀   █████████████████▄ ██▀         ▄▀█
   ▄█ ▄▀      ▀█▀ █▀ █▀ ▀█▀  ███████████████████ █▀ ▀▀      ▄▀▄▀
  ▄█    ▄███  █     █   █   ████████████████████  ▄█     ▄▀▀██▀ ▄███
███▄▄▄  █▄▄▄ █▄▄ ▄▄▀   █▄▄ ██████████████████▀▀   █▄▄ ▄▄ █▄▄█▄▄▄█▄▄▄
                           ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
                            ▀▀█████████████▄
                                █████████████▄
                                  █████████████▄
                                    ▀███████▀▀▀▀▀
                                      ▀████▀
                                        ▀█▀
LetItRide
                        ▄███████████▄
                       ██  ██████████▄
                     ▄█████████████  ██▄
            ▄▄▀█▄▄▄▄▄████████████████████▄
        ▄▄█▀   ███████████  █████  ████  █
    ▄██████ ▄▄███████████████████████████▀
 ▄▀▀ ██████████████████████████  ████  █
█  ▄███████████▀▀▀█████████████████████
██████████████    ████████▀▀██████  █▀
██████████████▄▄▄██████████   ▀▀▀▀▀▀▀
███▀ ▀██████████████████████
██    ███████████████████████
██▄▄██████████████████████████
██████████████▀   ██████████
  █████████████   ▄██████▀▀
     ▀▀██████████████▀▀
         ▀▀██████▀▀
[BTC]▄█████████████▀ ▄█
██            ▄█▀
██          ▄██ ▄█
██ ▄█▄    ▄███  ██
██ ▀███▄ ▄███   ██
██  ▀███████    ██
██    █████     ██
██     ███      ██
██      ▀       ██
██              ██
▀████████████████▀
mishax1
Legendary
*
Offline Offline

Activity: 1568

keybase.io/mishax1


View Profile
August 14, 2015, 07:10:14 PM
 #40944

http://www.kncminer.com/blog/newsarchive

I guess they will find out how worthless the xapo card is...   hahahaha

How come?   Whats your point of view on Xapo ?    ( If I were a Greece resident I would disagree with you).
TXSteve
Sr. Member
****
Offline Offline

Activity: 341


View Profile
August 14, 2015, 07:24:51 PM
 #40945

Alright, do perform a git pull n test it out.
Basically, if I have it set correctly, Ive modified KNC's loop to see if either DCDC are supplying current, if so then it doesnt kick it over to my loop(the custom resetting loop)

If all is correct, it will only kick over to my custom reset loop when both dcdc's on a die are registering current below the threshold of 5 amps.

ok, I'll check it now

looks like it is still going into that loop, I haven't had a failed soft reset yet -- otherwise it's running good
sometimes it scrolls  "KNC 4b[5:1:55]: Got nonce for unknown work in slot 0" before the reset, other times not  (always been like that)


[2015-08-14 13:52:24] Die 5-1 requires restart

Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439578355,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 13:53:05] Die 5-1 restarted
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
[2015-08-14 13:58:24] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439578716,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 13:59:06] Die 5-1 restarted
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
[2015-08-14 14:04:24] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439579075,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 14:05:06] Die 5-1 restarted
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
[2015-08-14 14:10:19] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439579427,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 14:10:57] Die 5-1 restarted
GenTarkin
Legendary
*
Offline Offline

Activity: 2170


View Profile
August 14, 2015, 07:35:36 PM
 #40946

Alright, do perform a git pull n test it out.
Basically, if I have it set correctly, Ive modified KNC's loop to see if either DCDC are supplying current, if so then it doesnt kick it over to my loop(the custom resetting loop)

If all is correct, it will only kick over to my custom reset loop when both dcdc's on a die are registering current below the threshold of 5 amps.

ok, I'll check it now

looks like it is still going into that loop, I haven't had a failed soft reset yet -- otherwise it's running good
sometimes it scrolls  "KNC 4b[5:1:55]: Got nonce for unknown work in slot 0" before the reset, other times not  (always been like that)


[2015-08-14 13:52:24] Die 5-1 requires restart

Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439578355,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 13:53:05] Die 5-1 restarted
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
[2015-08-14 13:58:24] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439578716,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 13:59:06] Die 5-1 restarted
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
[2015-08-14 14:04:24] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439579075,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 14:05:06] Die 5-1 restarted
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
[2015-08-14 14:10:19] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439579427,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 14:10:57] Die 5-1 restarted


Um.... weird, because the current registered through the DCDC's is 0 for both ... yet YOU ARE SURE its hashing?? Thats crazy! its impossible! LOL
Let me add a current measure output to the KNC loop then paste the output of script. wait up.

GenTarkin's MOD Kncminer Titan custom firmware! v1.0.4! <--- CLICK HERE
Donations: bitcoin- 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At || litecoin- LYXrLis3ik6TRn8tdvzAyJ264DRvwYVeEw
GenTarkin
Legendary
*
Offline Offline

Activity: 2170


View Profile
August 14, 2015, 07:43:28 PM
 #40947

Alright, do perform a git pull n test it out.
Basically, if I have it set correctly, Ive modified KNC's loop to see if either DCDC are supplying current, if so then it doesnt kick it over to my loop(the custom resetting loop)

If all is correct, it will only kick over to my custom reset loop when both dcdc's on a die are registering current below the threshold of 5 amps.

ok, I'll check it now

looks like it is still going into that loop, I haven't had a failed soft reset yet -- otherwise it's running good
sometimes it scrolls  "KNC 4b[5:1:55]: Got nonce for unknown work in slot 0" before the reset, other times not  (always been like that)


[2015-08-14 13:52:24] Die 5-1 requires restart

Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439578355,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 13:53:05] Die 5-1 restarted
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
[2015-08-14 13:58:24] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439578716,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 13:59:06] Die 5-1 restarted
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
[2015-08-14 14:04:24] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439579075,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 14:05:06] Die 5-1 restarted
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
[2015-08-14 14:10:19] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439579427,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 14:10:57] Die 5-1 restarted


BTW, whenever you do a git pull .... reapply your DCDC monitoring settings(in advanced tab) so it restarts the monitoring script. Because just downloading the changes wont change the running script.

GenTarkin's MOD Kncminer Titan custom firmware! v1.0.4! <--- CLICK HERE
Donations: bitcoin- 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At || litecoin- LYXrLis3ik6TRn8tdvzAyJ264DRvwYVeEw
GenTarkin
Legendary
*
Offline Offline

Activity: 2170


View Profile
August 14, 2015, 07:44:22 PM
 #40948

OK, added current logging to KNC's loop for when it detects a DCDC that has failed current test.
Paste log =)

GenTarkin's MOD Kncminer Titan custom firmware! v1.0.4! <--- CLICK HERE
Donations: bitcoin- 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At || litecoin- LYXrLis3ik6TRn8tdvzAyJ264DRvwYVeEw
TXSteve
Sr. Member
****
Offline Offline

Activity: 341


View Profile
August 14, 2015, 07:51:01 PM
 #40949

OK, added current logging to KNC's loop for when it detects a DCDC that has failed current test.
Paste log =)

ok, Will do

here's a screen shot of it hashing away -- it only ran a couple mins there



GenTarkin
Legendary
*
Offline Offline

Activity: 2170


View Profile
August 14, 2015, 08:01:11 PM
 #40950

OK, added current logging to KNC's loop for when it detects a DCDC that has failed current test.
Paste log =)

ok, Will do

here's a screen shot of it hashing away -- it only ran a couple mins there





so, restart the monitoring script as I described above and paste the latest contents of log since its restart here.

If both DCDC's are really reading 0 then dont know what to say, not much I can do lol

It could be that the DCDC current detection script is actually detecting an erronous output from the DCDC's in which case it sets the measured amps to 0, and thats why the die is being flagged for reset by the main loop (KNC's loop)
Thats really beyond my control =/

GenTarkin's MOD Kncminer Titan custom firmware! v1.0.4! <--- CLICK HERE
Donations: bitcoin- 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At || litecoin- LYXrLis3ik6TRn8tdvzAyJ264DRvwYVeEw
TXSteve
Sr. Member
****
Offline Offline

Activity: 341


View Profile
August 14, 2015, 08:19:23 PM
 #40951

OK, added current logging to KNC's loop for when it detects a DCDC that has failed current test.
Paste log =)

ok, Will do

here's a screen shot of it hashing away -- it only ran a couple mins there





so, restart the monitoring script as I described above and paste the latest contents of log since its restart here.

If both DCDC's are really reading 0 then dont know what to say, not much I can do lol

It could be that the DCDC current detection script is actually detecting an erronous output from the DCDC's in which case it sets the measured amps to 0, and thats why the die is being flagged for reset by the main loop (KNC's loop)
Thats really beyond my control =/

yeah, I don't know -- the extra soft resets don't seem to be hurting anything ... what is suppose to happen when a soft reset fails? into the loop for a count of ten, or does knc sending into the loop too mess that up?

[2015-08-14 14:53:51] --Start monitoring!--
DCDC temp monitoring ENABLED & threshold set to: 90
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
Current measurement on  ASIC# 5 DIE# 1: 0 Amps
Current measurement on  ASIC# 5 DIE# 1: 0 Amps
[2015-08-14 14:58:48] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439582340,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 14:59:30] Die 5-1 restarted
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
Current measurement on  ASIC# 5 DIE# 1: 0 Amps
Current measurement on  ASIC# 5 DIE# 1: 0 Amps
[2015-08-14 15:04:43] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439582694,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 15:05:25] Die 5-1 restarted
TXSteve
Sr. Member
****
Offline Offline

Activity: 341


View Profile
August 14, 2015, 08:34:18 PM
 #40952

unless you have some more tricks up your sleeves, it's probably as good as it's going to get  -- KNC throwing too many curve balls
Phoenix1969
Legendary
*
Offline Offline

Activity: 938


LIR DEV


View Profile
August 14, 2015, 08:54:31 PM
 #40953

http://www.kncminer.com/blog/newsarchive

I guess they will find out how worthless the xapo card is...   hahahaha


How come?   Whats your point of view on Xapo ?    ( If I were a Greece resident I would disagree with you).

I, like most others, have been waiting over a year for their Xapo card to be delivered.
Feedback from the 100 or so beta testers is pretty harsh as well.
Most people who have actually received their card are reporting a long list of card rejections across the board... not working at all for the most part.
They talk a great game... but have nothing yet.


                     ▀▀█████████▀████████████████▄
                        ████▄      ▄████████████████
                     ▄██████▀  ▄  ███████████████████
                  ▄█████████▄████▄███████████████████
                ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀████████
                                               ▀▀███▀
    ▄█▀█       ▄▀  ▄▀▀█  ▄▀   █████████████████▄ ██▀         ▄▀█
   ▄█ ▄▀      ▀█▀ █▀ █▀ ▀█▀  ███████████████████ █▀ ▀▀      ▄▀▄▀
  ▄█    ▄███  █     █   █   ████████████████████  ▄█     ▄▀▀██▀ ▄███
███▄▄▄  █▄▄▄ █▄▄ ▄▄▀   █▄▄ ██████████████████▀▀   █▄▄ ▄▄ █▄▄█▄▄▄█▄▄▄
                           ▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
                            ▀▀█████████████▄
                                █████████████▄
                                  █████████████▄
                                    ▀███████▀▀▀▀▀
                                      ▀████▀
                                        ▀█▀
LetItRide
                        ▄███████████▄
                       ██  ██████████▄
                     ▄█████████████  ██▄
            ▄▄▀█▄▄▄▄▄████████████████████▄
        ▄▄█▀   ███████████  █████  ████  █
    ▄██████ ▄▄███████████████████████████▀
 ▄▀▀ ██████████████████████████  ████  █
█  ▄███████████▀▀▀█████████████████████
██████████████    ████████▀▀██████  █▀
██████████████▄▄▄██████████   ▀▀▀▀▀▀▀
███▀ ▀██████████████████████
██    ███████████████████████
██▄▄██████████████████████████
██████████████▀   ██████████
  █████████████   ▄██████▀▀
     ▀▀██████████████▀▀
         ▀▀██████▀▀
[BTC]▄█████████████▀ ▄█
██            ▄█▀
██          ▄██ ▄█
██ ▄█▄    ▄███  ██
██ ▀███▄ ▄███   ██
██  ▀███████    ██
██    █████     ██
██     ███      ██
██      ▀       ██
██              ██
▀████████████████▀
GenTarkin
Legendary
*
Offline Offline

Activity: 2170


View Profile
August 14, 2015, 08:59:43 PM
 #40954

OK, added current logging to KNC's loop for when it detects a DCDC that has failed current test.
Paste log =)

ok, Will do

here's a screen shot of it hashing away -- it only ran a couple mins there





so, restart the monitoring script as I described above and paste the latest contents of log since its restart here.

If both DCDC's are really reading 0 then dont know what to say, not much I can do lol

It could be that the DCDC current detection script is actually detecting an erronous output from the DCDC's in which case it sets the measured amps to 0, and thats why the die is being flagged for reset by the main loop (KNC's loop)
Thats really beyond my control =/

yeah, I don't know -- the extra soft resets don't seem to be hurting anything ... what is suppose to happen when a soft reset fails? into the loop for a count of ten, or does knc sending into the loop too mess that up?

[2015-08-14 14:53:51] --Start monitoring!--
DCDC temp monitoring ENABLED & threshold set to: 90
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
Current measurement on  ASIC# 5 DIE# 1: 0 Amps
Current measurement on  ASIC# 5 DIE# 1: 0 Amps
[2015-08-14 14:58:48] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439582340,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 14:59:30] Die 5-1 restarted
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 2
Manually disabled die detected, skipping dead die detection. ASIC# 4, DIE# 4
Moving on with dead die test, no manual disabled die found
Current measurement on  ASIC# 5 DIE# 1: 0 Amps
Current measurement on  ASIC# 5 DIE# 1: 0 Amps
[2015-08-14 15:04:43] Die 5-1 requires restart
Attempting softreset of ASIC# 5 DIE# 1
{ "asic_6_voltage": { "die2": "-0.0366" }, "asic_6_frequency": { "die2": "150" } }
STATUS=S,When=1439582694,Code=92,Msg=PGA 0 set OK: Die setup Ok; asic 5 die 1 cmd RECONFIGURE,Description=bfgminer 5.2.0|
Detected AMPS DCDC0 0
Detected AMPS DCDC1 0
[2015-08-14 15:05:25] Die 5-1 restarted


Yeahp, KNC's loop is detecting both DCDC's @ 0 amps SO..... my script is gonna do soft resets on that die all the time and so would KNC's original script LOL

On another note:
So, just noticed something, my AND comparison in my loop is not evaluating correctly, which is why its not doing the up to 10 soft resets. I have NO idea why its not working as designed. Will have to find some different syntax to try.

GenTarkin's MOD Kncminer Titan custom firmware! v1.0.4! <--- CLICK HERE
Donations: bitcoin- 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At || litecoin- LYXrLis3ik6TRn8tdvzAyJ264DRvwYVeEw
GenTarkin
Legendary
*
Offline Offline

Activity: 2170


View Profile
August 14, 2015, 09:39:01 PM
 #40955

Sweet! Think I nailed the syntax error.... DAMNIT BASH why is nothing fucking standardized LOL....
Its like OH!!! if you want to do a if [ b=b && a=a ] ... you have to use [[ ]] so its retardedly if [[ b=b && a=a ]]
LOL
gonna confirm it works then do a push, will let ya know  when to do a pull

GenTarkin's MOD Kncminer Titan custom firmware! v1.0.4! <--- CLICK HERE
Donations: bitcoin- 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At || litecoin- LYXrLis3ik6TRn8tdvzAyJ264DRvwYVeEw
GenTarkin
Legendary
*
Offline Offline

Activity: 2170


View Profile
August 14, 2015, 09:50:35 PM
 #40956

OK ... go ahead and do a git pull, think I got the syntax nailed. It worked on my end for a fake hard reset & a live soft reset so... yeah

Also, I made it so in my loop it will attempt a soft reset every 60 seconds up to 7 times, if it fails all those it will do a hard reset at that point.
Now that my code is working, since that die of yours constantly shows 0 amps even with successful soft resets, it will succumb to my hard reset loop after it attempts 7 times. =(

GenTarkin's MOD Kncminer Titan custom firmware! v1.0.4! <--- CLICK HERE
Donations: bitcoin- 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At || litecoin- LYXrLis3ik6TRn8tdvzAyJ264DRvwYVeEw
TXSteve
Sr. Member
****
Offline Offline

Activity: 341


View Profile
August 14, 2015, 09:57:27 PM
 #40957

OK ... go ahead and do a git pull, think I got the syntax nailed. It worked on my end for a fake hard reset & a live soft reset so... yeah

Also, I made it so in my loop it will attempt a soft reset every 60 seconds up to 7 times, if it fails all those it will do a hard reset at that point.
Now that my code is working, since that die of yours constantly shows 0 amps even with successful soft resets, it will succumb to my hard reset loop after it attempts 7 times. =(

ok I'll try it out
GenTarkin
Legendary
*
Offline Offline

Activity: 2170


View Profile
August 14, 2015, 10:01:11 PM
 #40958

OK ... go ahead and do a git pull, think I got the syntax nailed. It worked on my end for a fake hard reset & a live soft reset so... yeah

Also, I made it so in my loop it will attempt a soft reset every 60 seconds up to 7 times, if it fails all those it will do a hard reset at that point.
Now that my code is working, since that die of yours constantly shows 0 amps even with successful soft resets, it will succumb to my hard reset loop after it attempts 7 times. =(

ok I'll try it out
I can write a custom version for you that will tell the KNC loop to ignore the die u have clocked at 150mhz that way it snot constantly doing a hard reset on you every 20mins =) Let me know.

GenTarkin's MOD Kncminer Titan custom firmware! v1.0.4! <--- CLICK HERE
Donations: bitcoin- 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At || litecoin- LYXrLis3ik6TRn8tdvzAyJ264DRvwYVeEw
GenTarkin
Legendary
*
Offline Offline

Activity: 2170


View Profile
August 14, 2015, 10:07:21 PM
 #40959

Actually, can you cat the file /var/run/.waas_cache and post ur results here while its running?

GenTarkin's MOD Kncminer Titan custom firmware! v1.0.4! <--- CLICK HERE
Donations: bitcoin- 1Px71mWNQNKW19xuARqrmnbcem1dXqJ3At || litecoin- LYXrLis3ik6TRn8tdvzAyJ264DRvwYVeEw
TXSteve
Sr. Member
****
Offline Offline

Activity: 341


View Profile
August 14, 2015, 10:19:05 PM
 #40960

Actually, can you cat the file /var/run/.waas_cache and post ur results here while its running?

is this what you want?
ASICCACHE 0 OFF 0.0 0 0.0000 0 0.0000 0 0.0000 0 0.0000 0.0 0.0000 0.0000 0.0 0.0000 0.0000 0.0 0.0000 0.0000 0.0 0.0000 0.0000 0.0 0.0000 0.0000 0.0 0.0000 0.0000 0.0 0.0000 0.0000 0.0 0.0000 0.0000
STALECOUNTERS 0 0 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
ASICCACHE 1 TI 56.0 325 -0.0513 325 -0.0513 325 -0.0513 325 -0.0513 74.2 0.7689 40.8125 76.4 0.7606 41.5625 79.8 0.7666 42.3125 80.6 0.7675 41.6875 77.4 0.7639 41.9375 73.6 0.7635 42.0000 76.5 0.7637 42.2500 73.2 0.7657 42.7500
STALECOUNTERS 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ASICCACHE 2 TI 55.5 325 -0.0513 300 -0.0513 325 -0.0513 325 -0.0513 79.0 0.7629 41.6875 83.5 0.7582 41.9375 82.8 0.7650 38.6875 76.5 0.7661 38.5000 75.5 0.7627 41.0000 74.4 0.7614 41.4375 78.9 0.7675 41.8750 76.2 0.7659 42.5625
STALECOUNTERS 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ASICCACHE 3 TI 44.0 325 -0.0366 0 -0.0366 325 -0.0366 0 -0.0366 70.9 0.7762 43.1250 80.9 0.7736 43.6875 43.6 0.0209 0.0000 44.9 0.0267 0.0000 66.2 0.7753 42.4375 68.6 0.7760 42.8125 44.0 0.0074 0.0000 41.5 0.0023 0.0000
STALECOUNTERS 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ASICCACHE 4 TI 57.0 325 -0.0513 325 -0.0513 325 -0.0439 325 -0.0513 79.2 0.7642 41.1250 78.9 0.7611 41.6250 81.4 0.7623 41.4375 84.0 0.7632 41.0625 84.1 0.7690 42.9375 78.6 0.7737 42.7500 74.4 0.7627 42.8125 75.9 0.7639 41.8750
STALECOUNTERS 4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ASICCACHE 5 TI 53.5 325 -0.0439 150 -0.0366 325 -0.0366 325 -0.0439 78.5 0.7719 41.9375 80.6 0.7719 41.6250 51.6 0.7068 0.0000 0.0 0.0000 0.0000 78.9 0.7795 43.1875 80.0 0.7798 42.6875 76.1 0.7688 41.9375 80.4 0.7721 41.6875
STALECOUNTERS 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 5 5 5 0 0 0 0 0 0 0 0 0 0 0 0
Pages: « 1 ... 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 [2048] 2049 2050 2051 2052 2053 2054 2055 2056 2057 2058 2059 2060 2061 2062 2063 2064 2065 2066 2067 2068 2069 2070 2071 2072 2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085 2086 2087 2088 2089 2090 2091 2092 2093 2094 2095 2096 2097 2098 ... 2138 »
  Print  
 
Jump to:  

Sponsored by , a Bitcoin-accepting VPN.
Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!