Swedish ASIC miner company kncminer.com

[Searing]

Little teaser for yall .... =)

so the mas dcdc temp is for them ALL right (damn I have one that runs good for the last year but runs hot..I've seen it at 102c and when all else is at 85 or so it is still at 91c)

don't suppose we could break this down into 4 to 6 cubes in some manner?

I did try messing with it ..nothing took so I left it at full out full bore speed and -03666 or whatever setting and viola it goes like hell (full don't touch me mode)

again been that way 1 year (knc titans always the surpise just waiting to melt something) and gave up trying to tweak it this summer when i was freaked out about it but still runs fine (go figure)


anyway i assume it is for all settings and it may stay that way so how high is the dcdc setting for such temp wise you can set this field at?

Yes when u turn on DCDC temp monitoring, the max applies to all DCDC's, if any DCDC's go over that ... it will throttle down the clock speed till the temp is under the threshold. Likewise when temps lower again by 10% less than the threshold, the clocks will be raised on dies which were previously throttled.
85C is the safe max - for longest DCDC life.

well i'm stuck ..the die in question runs full out at 325 and -0.366 or or not at all...been waiting for it blow up for more then 1 year..would be nice (hint?) if you could have this set per cube say?...but I understand....it will EVENTUALLY blow up I guess..but I've come to the conclusion the rest of the miner will likely go first (its knc they are evil this particular die likes this devil heat i guess ) go figure

on the other hand your auto tune for elec eff i can run that and always set the above odd ball die back to its max setting (of course i ever mess with it again it will probably blow up but still) I guess that could help my elec eff anyway....

my miners always 'skirting the edge of danger' so to speak .....sheesh

As per autotune(energy saver), if the die is unstable at any voltage lower than -.0366 then autotune will simply revert its voltage and reapply then stop further tuning of that die. It will go onto tune the rest of ur dies.

yeah ok..thanks ...just to be clear after auto-tune does this I can go back and 'tweak' some dies back (like my odd hot one) to previous stable settings (that perhaps auto tune does NOT like but seems to work anyway..) at least on my 'hexed' machine

if that is the case ..that would work as a further tweak i guess

again appreciate as others on here do your efforts on the firmware for us

(now entirely in your hands as of nov 6th I'm past the 1 year on the titan(s) ..no KNC warranty (not that there has been any for 8 months or so) only you to guide me in the 'KNC ASIC universe' now don't ya know (I am not worthy..heh)

[1713912016]

1713912016

[1713912016]

1713912016

[GenTarkin]

Little teaser for yall .... =)

so the mas dcdc temp is for them ALL right (damn I have one that runs good for the last year but runs hot..I've seen it at 102c and when all else is at 85 or so it is still at 91c)

don't suppose we could break this down into 4 to 6 cubes in some manner?

I did try messing with it ..nothing took so I left it at full out full bore speed and -03666 or whatever setting and viola it goes like hell (full don't touch me mode)

again been that way 1 year (knc titans always the surpise just waiting to melt something) and gave up trying to tweak it this summer when i was freaked out about it but still runs fine (go figure)


anyway i assume it is for all settings and it may stay that way so how high is the dcdc setting for such temp wise you can set this field at?

Yes when u turn on DCDC temp monitoring, the max applies to all DCDC's, if any DCDC's go over that ... it will throttle down the clock speed till the temp is under the threshold. Likewise when temps lower again by 10% less than the threshold, the clocks will be raised on dies which were previously throttled.
85C is the safe max - for longest DCDC life.

well i'm stuck ..the die in question runs full out at 325 and -0.366 or or not at all...been waiting for it blow up for more then 1 year..would be nice (hint?) if you could have this set per cube say?...but I understand....it will EVENTUALLY blow up I guess..but I've come to the conclusion the rest of the miner will likely go first (its knc they are evil this particular die likes this devil heat i guess ) go figure

on the other hand your auto tune for elec eff i can run that and always set the above odd ball die back to its max setting (of course i ever mess with it again it will probably blow up but still) I guess that could help my elec eff anyway....

my miners always 'skirting the edge of danger' so to speak .....sheesh

As per autotune(energy saver), if the die is unstable at any voltage lower than -.0366 then autotune will simply revert its voltage and reapply then stop further tuning of that die. It will go onto tune the rest of ur dies.

yeah ok..thanks ...just to be clear after auto-tune does this I can go back and 'tweak' some dies back (like my odd hot one) to previous stable settings (that perhaps auto tune does NOT like but seems to work anyway..) at least on my 'hexed' machine

if that is the case ..that would work as a further tweak i guess

again appreciate as others on here do your efforts on the firmware for us

(now entirely in your hands as of nov 6th I'm past the 1 year on the titan(s) ..no KNC warranty (not that there has been any for 8 months or so) only you to guide me in the 'KNC ASIC universe' now don't ya know (I am not worthy..heh)

Once "energy saver" completes it will say Status: Finished
At that point the user can safely change voltages as they desire.
If the user ever unchecks the "enabled" checkbox in the energy saver area then the "pre energy saver" settings will be applied. If the box is rechecked to be enabled again then it will simply restore the finished state of the "energy saver", at which point if using any user tweaked settings you would have to put those back in =P
I may put in an option in the "energy saver" box to allow user to override the previous finished run of "energy saver" therefore having "energy saver" run all over again.

[GenTarkin]

Something interesting Ive "fixed" along the way for this autotune.
I discovered most i2c locks that cause a reboot of the pi .... are actually because not the pi's i2c bus locking up but because of the controller locking up.
Good news is, I found a way to reinitialize the controller without having to reboot the pi =)
Of course if the controller needs constant reinitialization, then its either bad or the cable is bad/not connected properly.
This will be a feature of my next release as well =)

[TXSteve]

I have a new project for my titans. I am going to take each one apart, clean all the circuitry, and apply a conformal coating to protect from humidity, salt air, etc. It's a lot of work but I think it'll be worth it because I run them in unconditioned space

I like the  submersion cooling in mineral oil idea because it also protects from the environment, but the whole thing just seems way too messy for me

.... I just set up my black light and it feels like a time warp back to the 70's -- I wonder where I put the lava lamp and fiber optic lights ??

[vlx0]

Hi, could someone tell me how to use load balancing? Mine with one Titan let's say on 3 pools. @ 300mhz, each pool then around 108 MH? Copy from config would be helpful.
PS. I am using paid Gen Tarkin firmware.
Thank you!

[vegasguy]

We will be fixing load balancing in the next release. For now PM me your username on my site and when I verify you as a user, I will send you the manual instructions.

Vegas

[The Avenger]

Alright!!! These kfc shitstains are finally getting their day in court!

https://translate.google.co.uk/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fcomputersweden.idg.se%2F2.2683%2F1.607272%2Fmangmiljonkrav-mot-knc-miner-landar-i-tingsratten&edit-text=

Wording of the complaint here, only in Swedish though:
http://www.documentcloud.org/documents/1585448-maskad-stamningsansokan2.html

Come on Swedish law, let's see some of these kfc crooks in jail for Xmas!

[vegasguy]

So the next release of our firmware will have loads of updates. I do believe its the biggest one yet. So to tease you all Im giving you a sneak peak at our new wardrobe:

Check THIS out!!!

(Click to zoom in)

https://imgur.com/a/dfEVN

Feedback is welcome.

Vegas

[mindtrip]

So the next release of our firmware will have loads of updates. I do believe its the biggest one yet. So to tease you all Im giving you a sneak peak at our new wardrobe:

Check THIS out!!!

(Click to zoom in)

https://imgur.com/a/dfEVN

Feedback is welcome.

Vegas

looking forward to it any eta on release?

[notbatman]

Alright!!! These kfc shitstains are finally getting their day in court!

https://translate.google.co.uk/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fcomputersweden.idg.se%2F2.2683%2F1.607272%2Fmangmiljonkrav-mot-knc-miner-landar-i-tingsratten&edit-text=

Wording of the complaint here, only in Swedish though:
http://www.documentcloud.org/documents/1585448-maskad-stamningsansokan2.html

Come on Swedish law, let's see some of these kfc crooks in jail for Xmas!

As a victim of a scam ASIC company (BA) I really hope these scammers get thrown under the bus! Good luck to you guys.

[vegasguy]

Alright!!! These kfc shitstains are finally getting their day in court!

https://translate.google.co.uk/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fcomputersweden.idg.se%2F2.2683%2F1.607272%2Fmangmiljonkrav-mot-knc-miner-landar-i-tingsratten&edit-text=

Wording of the complaint here, only in Swedish though:
http://www.documentcloud.org/documents/1585448-maskad-stamningsansokan2.html

Come on Swedish law, let's see some of these kfc crooks in jail for Xmas!

As a victim of a scam ASIC company (BA) I really hope these scammers get thrown under the bus! Good luck to you guys.

Well it should be clear to anyone with a brain all the crap they pulled, but who knows how the Swedish justice system works.

[vegasguy]

So the next release of our firmware will have loads of updates. I do believe its the biggest one yet. So to tease you all Im giving you a sneak peak at our new wardrobe:

Check THIS out!!!

(Click to zoom in)

https://imgur.com/a/dfEVN

Feedback is welcome.

Vegas

looking forward to it any eta on release?

I would love to even give you an idea, but so much has gone into this release and so much of it still needs to be tested and tweaked. The best we can do now is keep you guys informed of the progress, and that we will do. How do you like our new wardrobe?

(Click to zoom in)

https://imgur.com/a/dfEVN

Vegas

[hawkfish007]

Did anybody successfully run Scrypt-N-Factor 11 @ nicehash? All I am getting is rejected shares for over 20 minutes, pointed my miner to stratum+tcp://scryptnf.usa.nicehash.com:3335/#xnsub#skipcbcheck.

[Searing]

Alright!!! These kfc shitstains are finally getting their day in court!

https://translate.google.co.uk/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fcomputersweden.idg.se%2F2.2683%2F1.607272%2Fmangmiljonkrav-mot-knc-miner-landar-i-tingsratten&edit-text=

Wording of the complaint here, only in Swedish though:
http://www.documentcloud.org/documents/1585448-maskad-stamningsansokan2.html

Come on Swedish law, let's see some of these kfc crooks in jail for Xmas!

As a victim of a scam ASIC company (BA) I really hope these scammers get thrown under the bus! Good luck to you guys.

Well it should be clear to anyone with a brain all the crap they pulled, but who knows how the Swedish justice system works.

Yeah...unfortunately ..I did not have the "balls' to pay the 1.5k was it? and/or under Swedish law "if you lose' are liable for the KNC law firm expenses and settlement costs too boot...was too open ended for me.

Also ONLY the 50 or so folk who did this class  action can get any 'justice' from KNC...from what I understand once this lawsuit is settled its done...ie no further lawsuits on the matter would be able to be made against  KNC...if KNC loses the case ..it addresses the concerns of the 50 folk above and then they walk on the rest of us

(please tell me I'm full of it ..but from what I understand on how this all works under Swedish law)

Anyway hopefully those folk will win against KNC and also at least press wise give KNC a black eye on what they pulled.



 

[adaseb]

Alright!!! These kfc shitstains are finally getting their day in court!

https://translate.google.co.uk/translate?sl=auto&tl=en&js=y&prev=_t&hl=en&ie=UTF-8&u=http%3A%2F%2Fcomputersweden.idg.se%2F2.2683%2F1.607272%2Fmangmiljonkrav-mot-knc-miner-landar-i-tingsratten&edit-text=

Wording of the complaint here, only in Swedish though:
http://www.documentcloud.org/documents/1585448-maskad-stamningsansokan2.html

Come on Swedish law, let's see some of these kfc crooks in jail for Xmas!

Honestly its the worse translation and hard to follow. Wish it was worded in English.

[mindtrip]

So the next release of our firmware will have loads of updates. I do believe its the biggest one yet. So to tease you all Im giving you a sneak peak at our new wardrobe:

Check THIS out!!!

(Click to zoom in)

https://imgur.com/a/dfEVN

Feedback is welcome.

Vegas

looking forward to it any eta on release?

I would love to even give you an idea, but so much has gone into this release and so much of it still needs to be tested and tweaked. The best we can do now is keep you guys informed of the progress, and that we will do. How do you like our new wardrobe?

(Click to zoom in)

https://imgur.com/a/dfEVN

Vegas

Looks very nice and clean 

[TXSteve]

So the next release of our firmware will have loads of updates. I do believe its the biggest one yet. So to tease you all Im giving you a sneak peak at our new wardrobe:

Check THIS out!!!

(Click to zoom in)

https://imgur.com/a/dfEVN

Feedback is welcome.

Vegas

looking forward to it any eta on release?

I would love to even give you an idea, but so much has gone into this release and so much of it still needs to be tested and tweaked. The best we can do now is keep you guys informed of the progress, and that we will do. How do you like our new wardrobe?

(Click to zoom in)

https://imgur.com/a/dfEVN

Vegas

Looks very nice and clean 

imo the colors are too dark, current color scheme is easier to read

[GenTarkin]

Bit of an update on "Energy Saver"   (Automatic voltage per die tuning) ... its now going further testing on other Titans, Im working through the bugs ... fun times!
All in all... Im surprised by how well its working thus far!

The next official release will be when "Energy Saver" is functional enough on a decent amount of Titans.

Below is a preview w/o new skin of course. But, shows the advanced page goodies Ive been working on =)

[vegasguy]

Im getting the colors remade to much brighter. I think you guys will LOVE the new look. I wasnt sure if I liked the dark or not, but Ive decided I dont either. So standby for new screen shots.

Vegas

[coinut]

I'm having trouble trying to login to my titan with ssh.

I open putty I type in the Ip of the miner and hit open

I login as "root" and type the password "admin"

then I get

login as: root
root@10.0.0.56's password:
Linux raspberrypi 3.12.26+ #24 PREEMPT Fri Sep 19 09:34:43 CEST 2014 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@raspberrypi:~# ^C
root@raspberrypi:~# login as: root
Password:
login as: root
root@10.0.0.56's password:
Linux raspberrypi 3.12.26+ #24 PREEMPT Fri Sep 19 09:34:43 CEST 2014 armv6l

The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
root@raspberrypi:~#

then I type

root@raspberrypi:~# screen -r
There is no screen to be resumed.

but i did notice that the other posts that I have seen where logged in as root@xx.xx.xx.xx(ip)   

I tried to login as the ip as the user i typed

root@raspberrypi:~# su 10.0.0.56
No passwd entry for user '10.0.0.56'

I'm stuck need some help, I just want to see the actual mining software displayed. what am I missing ?