|
sbfree
|
 |
December 02, 2013, 07:27:21 AM |
|
So, can someone explain to me how the tuning suite works? I am literally just guessing at what I am doing....although my Sat. now Jupiter has been hashing at a decent rate, apparently after having tweaked it slightly where I think it needed tweaking....it now seems to have a steadier and slightly higher hashing rate. But some guidance or explanation of what things do and the danger zones would be nice...my 2 satoshis....
SPI Voltate is for the communication chanel I believe. Underneath that for each asic and for each die you can change the voltage: 0V = no change from the original value. +value = you increase the voltage from original value -value = you decrease the voltage from original value My personal experience is: increasing the PSI voltage to is max settings at 3.3V and then for each die with problems increase its voltage substantially and if it helps then decrease it in small increment to find its lowest possible stable value. Cypher, thanks. I did realize that lowering the number actually raises the volts....anyway, would like to get more input from other members, especially KNC.... |
|
|
|
|
|
|
|
|
|
|
|
"If you don't want people to know you're a scumbag then don't be a scumbag." -- margaritahuyan
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
fubly
|
|
December 02, 2013, 07:53:26 AM |
|
I have heard the best way to save the wallet is to make an paperwallet, destroy the hotwallet and then throwing the paper into an oven.
Is it true?
|
each time you send a transaction don't forget to use a new address, each time you receive one also!
|
|
|
|
|
|
qiuness
|
|
December 02, 2013, 11:23:09 AM |
|
New Batch out, 4 seats left for extra 280GH Shares for FREE!
Link in sig
|
|
|
|
|
Sitarow
Legendary
 Offline
Activity: 1792
Merit: 1047
|
|
December 02, 2013, 11:57:52 AM |
|
So, can someone explain to me how the tuning suite works? I am literally just guessing at what I am doing....although my Sat. now Jupiter has been hashing at a decent rate, apparently after having tweaked it slightly where I think it needed tweaking....it now seems to have a steadier and slightly higher hashing rate. But some guidance or explanation of what things do and the danger zones would be nice...my 2 satoshis....
SPI Voltate is for the communication chanel I believe. Underneath that for each asic and for each die you can change the voltage: 0V = no change from the original value. +value = you increase the voltage from original value -value = you decrease the voltage from original value My personal experience is: increasing the PSI voltage to is max settings at 3.3V and then for each die with problems increase its voltage substantially and if it helps then decrease it in small increment to find its lowest possible stable value. Cypher, thanks. I did realize that lowering the number actually raises the volts....anyway, would like to get more input from other members, especially KNC.... I will have to see if this works with batch 1 miners. |
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
December 02, 2013, 12:17:15 PM |
|
So, can someone explain to me how the tuning suite works? I am literally just guessing at what I am doing....although my Sat. now Jupiter has been hashing at a decent rate, apparently after having tweaked it slightly where I think it needed tweaking....it now seems to have a steadier and slightly higher hashing rate. But some guidance or explanation of what things do and the danger zones would be nice...my 2 satoshis....
SPI Voltate is for the communication chanel I believe. Underneath that for each asic and for each die you can change the voltage: 0V = no change from the original value. +value = you increase the voltage from original value -value = you decrease the voltage from original value My personal experience is: increasing the PSI voltage to is max settings at 3.3V and then for each die with problems increase its voltage substantially and if it helps then decrease it in small increment to find its lowest possible stable value. Cypher, thanks. I did realize that lowering the number actually raises the volts....anyway, would like to get more input from other members, especially KNC.... I will have to see if this works with batch 1 miners. Works with mine, but I am perplexed by the lack of remedial maths skills, I must have been asked about a dozen times WRT to this. Just so everyone is clear, if the starting voltage is a negative number, moving it closer to zero INCREASES the voltage.  |
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
December 02, 2013, 12:21:54 PM |
|
Jeez here we go, fubly you realise there is a Marketplace in these forums right? |
|
|
|
|
fubly
|
|
December 02, 2013, 12:32:48 PM |
|
Jeez here we go, fubly you realise there is a Marketplace in these forums right? Sorry me please, but thank you for the link.  My first visit here was before a view weeks.  |
each time you send a transaction don't forget to use a new address, each time you receive one also!
|
|
|
|
CeeCee
|
|
December 02, 2013, 12:33:03 PM |
|
was someone able to to tune a 8vrm module? it just won't work!  tried spi 3.2 and them from down to up, tried default with voltage up and nothing.   |
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
December 02, 2013, 02:04:45 PM |
|
was someone able to to tune a 8vrm module? it just won't work! tried spi 3.2 and them from down to up, tried default with voltage up and nothing. No, but I did find with my 4 VRM one that putting the volts up too much turned the core off like your Die 2 is showing. Is that what your trying to do? Get Die 2 up and running? |
|
|
|
jelin1984
Legendary
Offline
Activity: 2408
Merit: 1004
|
|
December 02, 2013, 02:17:37 PM |
|
What news we have about November shipping?
|
|
|
|
|
|
OmegaNemesis28
|
|
December 02, 2013, 03:25:36 PM |
|
ridiculous. The price went up on it for $3,000. All because my bank wouldn't do my transfer on Thanksgiving. Horseshit.
|
|
|
|
|
ASIC-K
Sr. Member
Offline
Activity: 280
Merit: 250
Hell?
|
|
December 02, 2013, 03:32:22 PM |
|
ridiculous. The price went up on it for $3,000. All because my bank wouldn't do my transfer on Thanksgiving. Horseshit.
thats a pretty shitty bank!!! |
|
|
|
|
|
helmax
|
|
December 02, 2013, 03:40:17 PM |
|
why price incresed? nonsence
this version comes with psu maybe
|
looking job
|
|
|
|
CeeCee
|
|
December 02, 2013, 03:42:01 PM |
|
was someone able to to tune a 8vrm module? it just won't work! tried spi 3.2 and them from down to up, tried default with voltage up and nothing. No, but I did find with my 4 VRM one that putting the volts up too much turned the core off like your Die 2 is showing. Is that what your trying to do? Get Die 2 up and running? yep this is what i am trying. it would be very nice if you could share your settings. |
|
|
|
|
ASIC-K
Sr. Member
Offline
Activity: 280
Merit: 250
Hell?
|
|
December 02, 2013, 03:42:21 PM |
|
why price incresed? nonsence
this version comes with psu maybe
the price increased as the 10k machines were a special for customers who believed in them before they even shipped a product, this is not "nonsense" |
|
|
|
|
|
helmax
|
|
December 02, 2013, 03:48:27 PM |
|
wht special ? all members buy one miner
receive email for buy batch#1
if you say only who bought pre orders first time and they pay more 500 bucks this is correct yes these are special
|
looking job
|
|
|
ASIC-K
Sr. Member
Offline
Activity: 280
Merit: 250
Hell?
|
|
December 02, 2013, 03:51:39 PM |
|
wht special ? all members buy one miner
receive email for buy batch#1
if you say only who bought pre orders first time and they pay more 500 bucks this is correct yes these are special
yeah i don't think you understand what I'm saying. |
|
|
|
|
Biffa
Legendary
Offline
Activity: 3220
Merit: 1220
|
|
December 02, 2013, 03:52:07 PM |
|
wht special ? all members buy one miner
receive email for buy batch#1
if you say only who bought pre orders first time and they pay more 500 bucks this is correct yes these are special
1. You have it the wrong way round, the $13K price is the retail price it was always going to be. 2. The $10K price was a discounted price for previous customers, any previous customer of Batch 1 or Batch 2 devices. |
|
|
|
ASIC-K
Sr. Member
Offline
Activity: 280
Merit: 250
Hell?
|
|
December 02, 2013, 03:52:48 PM |
|
wht special ? all members buy one miner
receive email for buy batch#1
if you say only who bought pre orders first time and they pay more 500 bucks this is correct yes these are special
1. You have it the wrong way round, the $13K price is the retail price it was always going to be. 2. The $10K price was a discounted price for previous customers, any previous customer of Batch 1 or Batch 2 devices. +1 well said! |
|
|
|
|
|
