Swedish ASIC miner company kncminer.com

[tolip_wen]

Does anyone
Under volt Neptune
And run at 500 mhz

yes
I do

YMMV

[1714060157]

1714060157

[1714060157]

1714060157

[1714060157]

1714060157

[1714060157]

1714060157

[1714060157]

1714060157

[jelin1984]

More details please

[dropt]

Well excuse me for not reading every post in this thread before I ask a question. Anybody with half a brain could figure out that if I had seen Tulip's comment I wouldn't have asked the question.

You don't need to read every post in the thread, but reading the most recent on a specific topic certainly help if you're going to have a discussion.

You Neptune owners are a touchy bad tempered lot. Can't imagine why. Better luck next time fellas ~L)L~

I never ordered one of these piles of junk.  My only pre-order ever was for an Avalon at the very beginning of this whole ASIC game.

So, in conclusion, if it is a LM75 then yes it is measuring the board temperature in its locale, not the on die ASIC temperature via a temperature diode on the ASIC.

Correct.

[tolip_wen]

More details please

I adjust voltage in BOTH directions and compare results.
I seek lowest current.
I don't care what the voltage is if the ASIC works.
Lowest current for me is lower voltage.
Lower current is often also lower temperature on ASIC and VRM.
Some die are different.

Yours ASICs could be different.

YMMV


EDIT
lower voltage is more NEGATIVE number (notice the sign in front of the numbers)
Try -0.0439 and see if your ASIC is happy!

[jelin1984]

i had try -0.0513
but one cable at asic cube
is hotter than stock version
why?

speed 3.56 th

[tolip_wen]

i had try -0.0513
but one cable at asic cube
is hotter than stock version
why?

speed 3.56 th

If your speed is 3.56 just let it run!!!


or
Look on Advanced page for WHY.
If numbers for current(A or I) and power(Watt) go up,
adjust in other direction and retest.

You can also adjust and use temperature as decision variable.
(if that is what interests you)

All ASIC are different.
Some are power hungry.

You may also have PCIe cable that is different.
Did you try different PCIe cable?

YMMV

[jelin1984]

i had all cube with 16 awg cable

but one cube
is f.... cable hot

and i do not think that is safe

[tolip_wen]

i had all cube with 16 awg cable

but one cube
is f.... cable hot

and i do not think that is safe

You can check each of the 6 PCIe wires for hot.
If you find one that is NOT hot when all others are it is the problem.
If you find one that is NOT hot when all others are it is the problem.
If you find one that is NOT hot when all others are it is the problem.

You need all 6 PCIe wires working for 'safe' operation.
They should all be same temperature.

Best to change the PCIe cable if you have ONE cool wire in a hot cable.
You could also inspect the cable and look for wires that are not pushed all the way into the plastic connector housing.
If it is a modular PSU look at PSU end also.
Be sure connectors are installed all the way.
PUSH on wires when connecting, PULL on plastic housing when disconnecting.

Most melted PCIe cables I have ever seen were caused by a failure in one of the 6 wires.
If you ever find only 2 melted it is because they did not survive doing work for bad wire.
They tried but failed.
...............................................................................

You might just have a ASIC that uses more power.

YMMV

[jelin1984]

If put wrong username and pass word
How I can reset the miner and put new username and password

[NilBit]

http://forum.kncminer.com/forum/main-category/main-forum/50827-how-to-reset-password-on-neptune

[jelin1984]

Thanks a lot

Newbie
Really a lot

[Phoenix1969]

Goin' pretty steady...  (2Neppies)   Started at around midnight night of 10th/ morning of 11th

[EvilPanda]

Meanwhile in the KNC headquarters:
http://captiongenerator.com/19941/KNC-Board-Meeting-About-GAW-VaultBreakers

[s1gs3gv]

Lots of folks here are in a bad mood because Spondoolies is just about to ship their 6TH $4500 machines.

[The Avenger]

Meanwhile in the KNC headquarters:
http://captiongenerator.com/19941/KNC-Board-Meeting-About-GAW-VaultBreakers

Sam as Hitler and GAW Josh as Stalin. This video is pretty much spot on. Most amusing


In other "hater" news, some well deserved bad press for KNC. If I had written it, I would have used the words "lining their own pockets", "blatant lies" and "evil fucks" a bit more often. But that's just me  

http://www.cryptocoinsnews.com/news/ccn-reveals-timeline-kncminers-struggle-20nm-asic-bitcoin-miners/2014/07/22

[The Avenger]

To respond:

I don't understand you hater folk.

Neither do I. The guy simply asked you a question and you got offended (or not).

Just an FYI but It's _my_ credibility you have questioned.
I looked at the parts and reported here as asked.

So no one gets offended ever by a troll or newbie or someone trying to be a a-hole?

And of course, no one ever gets sarcastic

You can check each of the 6 PCIe wires for hot.
If you find one that is NOT hot when all others are it is the problem.
If you find one that is NOT hot when all others are it is the problem.
If you find one that is NOT hot when all others are it is the problem.

Right?

[xstr8guy]

Can these neptunes run solitaire though?

 

No, I'm pretty sure you can't play card games on a Neptune.

[tolip_wen]

You can check each of the 6 PCIe wires for hot.
If you find one that is NOT hot when all others are it is the problem.
If you find one that is NOT hot when all others are it is the problem.
If you find one that is NOT hot when all others are it is the problem.

Right?

I posted build instructions for cgminer on a Nep in the cgminer thread.
If things like that interest you...
https://bitcointalk.org/index.php?topic=28402.msg7977952#msg7977952


YMMV

[tolip_wen]

I feel sorry for you guys and how you got screwed. You didn't because you love the hardware part, but everyone else that kept their orders did. I don't like asshole companies ripping us off. that's why I'm no fan of them. Reason I got pissed off is he's been a real douche in other posts and I made the mistake of sticking up for him here when people were bashing him. If I misread what he had to say then I am wrong, but based on what I've seen lately I felt I needed to be an ass there.

I am guilty of not reading 'every' post.
I missed where he got bowed up.
I doubt you would make that up so I'll take it at face value.

If he asked for it game on.


YMMV

[Searing]

Meanwhile in the KNC headquarters:
http://captiongenerator.com/19941/KNC-Board-Meeting-About-GAW-VaultBreakers

er I suggest you don't try to link the above to the Humor Section of KNC forums..they banned it within 1 min (really 1 min) of my posting it...oops!

er seems I hit a sore spot (hey it was even in the humor area!)....

Searing