xhomerx10
Legendary
Offline
Activity: 3976
Merit: 8658
|
|
August 28, 2014, 02:26:26 PM |
|
Now that I have my B2 KNC Miner what PC power supplies will work best, and should I buy 3 lower wattage ones as supposed to 2 higher wattage PSUs?
You've been waiting this long for the unit, why on earth are you just trying to figure out how to power it now? Because like you said I have been waiting a long time for it to ship, now that it's shipped and arrived I need to figure out how to power it up without it catching fire. lol Good luck at the mining game, sounds like you will need it. Come on man, we ALL need it. It's easy to get the Neptunes up and running - you don't have to run any special software on your computer like earlier days. Check the specs on the PSU to see how many amps the 12V rail can supply - for example the Corsair AX1500i has one MASSIVE 125 amp 12V rail - this will supply 3 of the 5 Neptune boards no problem. Two of these would be overkill but look for something that supplies at least 35 amps PER BOARD on the 12V rail or multiples thereof. It's easy.
|
|
|
|
smoothrunnings
|
|
August 28, 2014, 02:30:33 PM |
|
Now that I have my B2 KNC Miner what PC power supplies will work best, and should I buy 3 lower wattage ones as supposed to 2 higher wattage PSUs?
You've been waiting this long for the unit, why on earth are you just trying to figure out how to power it now? Because like you said I have been waiting a long time for it to ship, now that it's shipped and arrived I need to figure out how to power it up without it catching fire. lol Good luck at the mining game, sounds like you will need it. Come on man, we ALL need it. It's easy to get the Neptunes up and running - you don't have to run any special software on your computer like earlier days. Check the specs on the PSU to see how many amps the 12V rail can supply - for example the Corsair AX1500i has one MASSIVE 125 amp 12V rail - this will supply 3 of the 5 Neptune boards no problem. Two of these would be overkill but look for something that supplies at least 35 amps PER BOARD on the 12V rail or multiples thereof. It's easy. So in the case of the EVGA I posted the link to is has one +12V rail at 108A. So will that be enough?
|
|
|
|
wpgdeez
|
|
August 28, 2014, 02:34:45 PM |
|
Now that I have my B2 KNC Miner what PC power supplies will work best, and should I buy 3 lower wattage ones as supposed to 2 higher wattage PSUs?
You've been waiting this long for the unit, why on earth are you just trying to figure out how to power it now? Because like you said I have been waiting a long time for it to ship, now that it's shipped and arrived I need to figure out how to power it up without it catching fire. lol Good luck at the mining game, sounds like you will need it. Come on man, we ALL need it. It's easy to get the Neptunes up and running - you don't have to run any special software on your computer like earlier days. Check the specs on the PSU to see how many amps the 12V rail can supply - for example the Corsair AX1500i has one MASSIVE 125 amp 12V rail - this will supply 3 of the 5 Neptune boards no problem. Two of these would be overkill but look for something that supplies at least 35 amps PER BOARD on the 12V rail or multiples thereof. It's easy. Yes but every second in the mining game is critical. You should be prepared and have done your due diligence so when you get your equipment you can hit the ground running to try and obtain that elusive ROI
|
|
|
|
Tigggger
Legendary
Offline
Activity: 1098
Merit: 1000
|
|
August 28, 2014, 02:44:17 PM |
|
So in the case of the EVGA I posted the link to is has one +12V rail at 108A. So will that be enough?
The EVGA's are fine, I run my neptune with 2 of them. 1 powers 3 cubes, the other 2 cubes and controller. The only think I would suggest is to buy some replacement 16awg cables as the standard ones were running a lot hotter than I was comfortable with (the 30cm are too short IMHO I got 45cm ones) http://www.shakmods.com/shop&&#!/~/product/category=3316088&id=37642162
|
|
|
|
xhomerx10
Legendary
Offline
Activity: 3976
Merit: 8658
|
|
August 28, 2014, 02:44:53 PM |
|
Now that I have my B2 KNC Miner what PC power supplies will work best, and should I buy 3 lower wattage ones as supposed to 2 higher wattage PSUs?
You've been waiting this long for the unit, why on earth are you just trying to figure out how to power it now? Because like you said I have been waiting a long time for it to ship, now that it's shipped and arrived I need to figure out how to power it up without it catching fire. lol Good luck at the mining game, sounds like you will need it. Come on man, we ALL need it. It's easy to get the Neptunes up and running - you don't have to run any special software on your computer like earlier days. Check the specs on the PSU to see how many amps the 12V rail can supply - for example the Corsair AX1500i has one MASSIVE 125 amp 12V rail - this will supply 3 of the 5 Neptune boards no problem. Two of these would be overkill but look for something that supplies at least 35 amps PER BOARD on the 12V rail or multiples thereof. It's easy. Yes but every second in the mining game is critical. You should be prepared and have done your due diligence so when you get your equipment you can hit the ground running to try and obtain that elusive ROI Of course you are correct sir but it's all part of the learning experience. Now he knows too!
|
|
|
|
tolip_wen
|
|
August 28, 2014, 02:46:00 PM |
|
Now that I have my B2 KNC Miner what PC power supplies will work best, and should I buy 3 lower wattage ones as supposed to 2 higher wattage PSUs?
You've been waiting this long for the unit, why on earth are you just trying to figure out how to power it now? Because like you said I have been waiting a long time for it to ship, now that it's shipped and arrived I need to figure out how to power it up without it catching fire. lol If you get ATX PC PSU's you might consider NOT getting modular ones. The extra connectors is just another possible point of failure. (this would prolly require more smaller ones, as big ones are often modular) YMMV So you wouldn't recommend two of these? http://www.newegg.com/Product/Product.aspx?Item=N82E16817438011I don't see any PC non-modular PSU's on the market in Canada. The only way I could get a non-modular is to buy something from IBM, Dell or HP but the cost would out weigh any and all hopes to recoup all of the cost or part of it. Use what you can get your hands on quickly. Just keep in mind that modular is not 'better' if you have the choice. The EVGA looks like it will work. If I had an unpowered 3.5T @ home I would use whatever I could have installed in 2 hours! Each possible day delay you could spend $50 more and come out even considering that is close to what you could mine in a day. It is a VERY subjective decision involving YOUR budget and shipping time etc. I use two (IBM) DPS-2000BB 2kWatt PSU per Neptune. (220VAC) They are only USD $50.00 each with free shipping. Add breakoutboards, fan, and cables and it's about $130 per 2kW. I started with homemade connectors on the PSUs. https://i.imgur.com/epKz23R.jpgSome consider a 4kW rail too big for safe home use. It _IS_ a valid concern if miner are near flamables. YMMV
|
'twisted research and opinion' donations happily accepted @ 13362fxFAdrhagmCvSmFy4WoHrNRPG2V57 My sub 1337 vanity address
|
|
|
xhomerx10
Legendary
Offline
Activity: 3976
Merit: 8658
|
|
August 28, 2014, 02:47:14 PM |
|
Now that I have my B2 KNC Miner what PC power supplies will work best, and should I buy 3 lower wattage ones as supposed to 2 higher wattage PSUs?
You've been waiting this long for the unit, why on earth are you just trying to figure out how to power it now? Because like you said I have been waiting a long time for it to ship, now that it's shipped and arrived I need to figure out how to power it up without it catching fire. lol Good luck at the mining game, sounds like you will need it. Come on man, we ALL need it. It's easy to get the Neptunes up and running - you don't have to run any special software on your computer like earlier days. Check the specs on the PSU to see how many amps the 12V rail can supply - for example the Corsair AX1500i has one MASSIVE 125 amp 12V rail - this will supply 3 of the 5 Neptune boards no problem. Two of these would be overkill but look for something that supplies at least 35 amps PER BOARD on the 12V rail or multiples thereof. It's easy. So in the case of the EVGA I posted the link to is has one +12V rail at 108A. So will that be enough? You could run 3 on that one but I think it would be very close to maxing out. You might want to leave a little more room for error.
|
|
|
|
xhomerx10
Legendary
Offline
Activity: 3976
Merit: 8658
|
|
August 28, 2014, 03:09:00 PM |
|
Now that I have my B2 KNC Miner what PC power supplies will work best, and should I buy 3 lower wattage ones as supposed to 2 higher wattage PSUs?
You've been waiting this long for the unit, why on earth are you just trying to figure out how to power it now? Because like you said I have been waiting a long time for it to ship, now that it's shipped and arrived I need to figure out how to power it up without it catching fire. lol If you get ATX PC PSU's you might consider NOT getting modular ones. The extra connectors is just another possible point of failure. (this would prolly require more smaller ones, as big ones are often modular) YMMV So you wouldn't recommend two of these? http://www.newegg.com/Product/Product.aspx?Item=N82E16817438011I don't see any PC non-modular PSU's on the market in Canada. The only way I could get a non-modular is to buy something from IBM, Dell or HP but the cost would out weigh any and all hopes to recoup all of the cost or part of it. There are tons of non-modular in Canada. You could probably run with 5 of these - http://www.canadacomputers.com/product_info.php?cPath=33_1238_442&item_id=063157If the mail in rebate applies for all 5, your good to go for under $200 *N.B. DO NOT plug all of these into one outlet. The 120V circuits in Canada are rated for 1625 Watts max. You will need to spread the power supplies over 2 circuits. There are some 120V circuits in homes that will handle a little more - usually they are in the kitchen and have 20amp breakers associated with them. I would still spread the load over 2 or more circuits.
|
|
|
|
padrino
Legendary
Offline
Activity: 1428
Merit: 1000
https://www.bitworks.io
|
|
August 28, 2014, 03:15:15 PM |
|
Is there a place online that selling the PCIe splitter and that sells a high quality one?
Thanks,
contact cablez on here he sent me a fine pair of them Searing Thanks, With respect to these cables, I guess one needs to on the 5th miner so that the power is shared by the two PSU's I buy? I looked back through threads as much as I could as there is more threads on people complaining about refunds and all that hoopla than there is on actual configuration and testing of the miners with PSU's and these cables. So I am not too clear if I just need to buy one or many, if I need many why? Thanks, Do not split a single cube between 2 PSUs, you will mess things up... Use one PSU to power three cubes (with splitters if you like, but all tied to one PSU), and another to power two.
|
|
|
|
dekodoge
|
|
August 28, 2014, 03:19:15 PM |
|
Ive preordered the "2 batch" and im 26 on queu. Hope you guys are real and this aint a scam.
You did you due diligence yeah.
|
|
|
|
adizzle
Newbie
Offline
Activity: 35
Merit: 0
|
|
August 28, 2014, 03:38:24 PM |
|
Hey all, just now i received my order for 2 batch 2 neptunes paid jan 11 order 176xx wanted to give you all a heads up on knc progress.
I have a question regarding the ethernet cable each controller board requires..are there any ethernet cables that can hook up 2 controller boards to one router..i guess sort of like the pcie Y cables people have been purchasing on this thread? Sorry for noob question***
Thank you
|
|
|
|
dekodoge
|
|
August 28, 2014, 03:44:42 PM |
|
Hey all, just now i received my order for 2 batch 2 neptunes paid jan 11 order 176xx wanted to give you all a heads up on knc progress.
I have a question regarding the ethernet cable each controller board requires..are there any ethernet cables that can hook up 2 controller boards to one router..i guess sort of like the pcie Y cables people have been purchasing on this thread? Sorry for noob question***
Thank you
its called a switch. you cant Y cable Ethernet or half you data would be in the the wrong place at the wrong time.
|
|
|
|
Tigggger
Legendary
Offline
Activity: 1098
Merit: 1000
|
|
August 28, 2014, 03:46:24 PM |
|
Hey all, just now i received my order for 2 batch 2 neptunes paid jan 11 order 176xx wanted to give you all a heads up on knc progress.
I have a question regarding the ethernet cable each controller board requires..are there any ethernet cables that can hook up 2 controller boards to one router..i guess sort of like the pcie Y cables people have been purchasing on this thread? Sorry for noob question***
Thank you
If you don't have enough ports on your existing router, you just need to buy a switch, they come in various sizes, you'll only need a 4-5 port one and they are cheap something like this... http://www.ebuyer.com/259797-tp-link-tl-sf1005d-5-port-10-100-switch-tl-sf1005d
|
|
|
|
smoothrunnings
|
|
August 28, 2014, 03:47:17 PM |
|
Is Batch 2 shipments any different than Batch 1's as far as the box size?
I have to go pickup my Neppy tonight as my Condo refused to take the box because it was too large! LOL
|
|
|
|
smoothrunnings
|
|
August 28, 2014, 03:49:11 PM |
|
Hey all, just now i received my order for 2 batch 2 neptunes paid jan 11 order 176xx wanted to give you all a heads up on knc progress.
I have a question regarding the ethernet cable each controller board requires..are there any ethernet cables that can hook up 2 controller boards to one router..i guess sort of like the pcie Y cables people have been purchasing on this thread? Sorry for noob question***
Thank you
A Y cable would be funny!
|
|
|
|
dekodoge
|
|
August 28, 2014, 04:03:31 PM |
|
Hey all, just now i received my order for 2 batch 2 neptunes paid jan 11 order 176xx wanted to give you all a heads up on knc progress.
I have a question regarding the ethernet cable each controller board requires..are there any ethernet cables that can hook up 2 controller boards to one router..i guess sort of like the pcie Y cables people have been purchasing on this thread? Sorry for noob question***
Thank you
A Y cable would be funny! they do exist but it to run two Ethernet over one backhaul cable. http://www.trademoon.com/17-05118-01-Refurbished_p_146754.html
|
|
|
|
smoothrunnings
|
|
August 28, 2014, 04:22:59 PM |
|
Hey all, just now i received my order for 2 batch 2 neptunes paid jan 11 order 176xx wanted to give you all a heads up on knc progress.
I have a question regarding the ethernet cable each controller board requires..are there any ethernet cables that can hook up 2 controller boards to one router..i guess sort of like the pcie Y cables people have been purchasing on this thread? Sorry for noob question***
Thank you
A Y cable would be funny! they do exist but it to run two Ethernet over one backhaul cable. http://www.trademoon.com/17-05118-01-Refurbished_p_146754.htmlThat's not Ethernet, and you can run two connections over one cable as you only have one set of transmit and receive pairs. It would only work if the single end was wired different for a non-standard Ethernet switch.
|
|
|
|
dekodoge
|
|
August 28, 2014, 04:39:27 PM |
|
Hey all, just now i received my order for 2 batch 2 neptunes paid jan 11 order 176xx wanted to give you all a heads up on knc progress.
I have a question regarding the ethernet cable each controller board requires..are there any ethernet cables that can hook up 2 controller boards to one router..i guess sort of like the pcie Y cables people have been purchasing on this thread? Sorry for noob question***
Thank you
A Y cable would be funny! they do exist but it to run two Ethernet over one backhaul cable. http://www.trademoon.com/17-05118-01-Refurbished_p_146754.htmlThat's not Ethernet, and you can run two connections over one cable as you only have one set of transmit and receive pairs. It would only work if the single end was wired different for a non-standard Ethernet switch. yeah the labeling was wrong(FC splitter it seems) but you can get little splitters to put each end and run two over one ethernet cable. You still need the ports on both ends to support this.
|
|
|
|
AFox
|
|
August 28, 2014, 04:46:11 PM |
|
Hey all, just now i received my order for 2 batch 2 neptunes paid jan 11 order 176xx wanted to give you all a heads up on knc progress.
I have a question regarding the ethernet cable each controller board requires..are there any ethernet cables that can hook up 2 controller boards to one router..i guess sort of like the pcie Y cables people have been purchasing on this thread? Sorry for noob question***
Thank you
A Y cable would be funny! they do exist but it to run two Ethernet over one backhaul cable. http://www.trademoon.com/17-05118-01-Refurbished_p_146754.htmlThat's not Ethernet, and you can run two connections over one cable as you only have one set of transmit and receive pairs. It would only work if the single end was wired different for a non-standard Ethernet switch. yeah the labeling was wrong(FC splitter it seems) but you can get little splitters to put each end and run two over one ethernet cable. You still need the ports on both ends to support this. OMG, don't hurt your head. Just buy a switch : http://en.wikipedia.org/wiki/Network_switch1 cable goes from your router to the switch. And two other cables go from the switch to your Neptunes. Everything is automatic nothing to configure.
|
|
|
|
dekodoge
|
|
August 28, 2014, 04:56:58 PM |
|
Which is exactly what i said in my first post "SWITCH"
|
|
|
|
|