EWBF's CUDA Zcash miner

[Amph]

Suprnova not registered all h/s with ewbf 0.1.0 , Im now send 2000 h/s but on dashboard read only 1800 h/s max , monitoring this up 3 hours , anyone with this issue ? .

that's normal, pool only display an estimate, see the earning instead

[1713290406]

1713290406

[1713290406]

1713290406

[1713290406]

1713290406

[1713290406]

1713290406

[1713290406]

1713290406

[m1n1ngP4d4w4n]

Suprnova not registered all h/s with ewbf 0.1.0 , Im now send 2000 h/s but on dashboard read only 1800 h/s max , monitoring this up 3 hours , anyone with this issue ? .

that's normal, pool only display an estimate, see the earning instead

Also if you want better stats, either look @ your worker page, or @ the api, because the dashboard show an optimized/throttled version to save up on pool ressource. But yeah as Amph stated earning is the true meter

Good job,EWBF:

Nice numbers but power is too high to be profitable imho, i do 425sols/s @60% power. by the way you may do more hash @150/650-600 because zcash love gpu core

This depends on the graphics card. For me, at 70% power hashed only 380-390 Sol / s. For me it is profitable. I pay $ 0.0717 electricity and have more of the $ 4.5 hashing with the power limit of the 122. Speed  the core through 100 MHZ  closing my miner ( this is max overcklock ) .

Ah i see with this low price i guess you can run it full speed lucky you  . Weird you can't go above 100 for core, i have the same model as you (evga 1070 FTW) and i can do 150/600 no problem.

[wll1rah]

Which model is best for good hashes but remains in budget (not over priced)
How much hashes these models can get
gtx 760
gtx 970 EXOC?
gtx970 G1
gtx 980 ti ?
Msi gtx 970
Gigabyte Gtx 1050Ti 4GB
gtx 1060 ?
msi gtx 1060 6gb twin frozer
Asus strix Gtx 950 Direct CU II
Gtx 1060 zotac 6gb
Asus Dual Geforce Gtx 1070 8 Gb

Whats minimum GB and Bits card can i use for test i mean which is lowest model should i use? gtx 550ti,650ti Grin

Thanks in Advance

If you can wait AMD's Vega should drop the price on the GTX 1070/ 1060.  Otherwise the GTX 1060 has the best price performance at the moment

[jiggytom]

good job:

1070 +100 core , power limit. 70 = 430ish
1060 6g +100 core , power limit 70 = stable 300
1080 +100 core = stable 530

What's your memory clock on 1080?

[frazier34567]

6 EVGA 750 ti SCs are running 74-81 Sol/s  No OC on Processor (1320 MHZ) +400 on Mem (3100 MHz)
1 EVGA 1070 SC is running 421-429 Sol/s No OC on Processor (1898 MHZ) +400 on Mem (4202 MHz)

I don't pay for electrical, included in rent.

[ioglnx]

Suprnova not registered all h/s with ewbf 0.1.0 , Im now send 2000 h/s but on dashboard read only 1800 h/s max , monitoring this up 3 hours , anyone with this issue ? .

Same issue here even with 0.0.9 but flypool shows correct.

[Lucky - Luciano]

Suprnova not registered all h/s with ewbf 0.1.0 , Im now send 2000 h/s but on dashboard read only 1800 h/s max , monitoring this up 3 hours , anyone with this issue ? .

that's normal, pool only display an estimate, see the earning instead

Also if you want better stats, either look @ your worker page, or @ the api, because the dashboard show an optimized/throttled version to save up on pool ressource. But yeah as Amph stated earning is the true meter

Good job,EWBF:

Nice numbers but power is too high to be profitable imho, i do 425sols/s @60% power. by the way you may do more hash @150/650-600 because zcash love gpu core

This depends on the graphics card. For me, at 70% power hashed only 380-390 Sol / s. For me it is profitable. I pay $ 0.0717 electricity and have more of the $ 4.5 hashing with the power limit of the 122. Speed  the core through 100 MHZ  closing my miner ( this is max overcklock ) .

Ah i see with this low price i guess you can run it full speed lucky you  . Weird you can't go above 100 for core, i have the same model as you (evga 1070 FTW) and i can do 150/600 no problem.

Thanks for the information for your EVGA FTW GTX 1070. Maybe I got a worse example of graphics cards. However, I'll try and newer version miner with OC +150 MHz for GPU.

[tbearhere]

6 EVGA 750 ti SCs are running 74-81 Sol/s  No OC on Processor (1320 MHZ) +400 on Mem (3100 MHz)
1 EVGA 1070 SC is running 421-429 Sol/s No OC on Processor (1898 MHZ) +400 on Mem (4202 MHz)

I don't pay for electrical, included in rent.

That's what I get too.

[kumax]

6 EVGA 750 ti SCs are running 74-81 Sol/s  No OC on Processor (1320 MHZ) +400 on Mem (3100 MHz)
1 EVGA 1070 SC is running 421-429 Sol/s No OC on Processor (1898 MHZ) +400 on Mem (4202 MHz)

I don't pay for electrical, included in rent.

Pretty good numbers on the 750 ti.
I would say that it should have quite simmilar performance as my 760, but I can't get anything more than 45-50 stable sol/s (56 on max).
I have +100 on core and +120 on Mem (3130 MHz), but unfortunatelly the biggest problem is temperature.
I'm only on 60% of power, but on 90°C. When I tried to set lower temp priority to 80°C, sols went down rapidly. 

[Psynthax]

Version 0.1.0b is more stable over here.. no more miner crashes even at higher OC..

Thanks!

[mrtrodonet]

good job:

1070 +100 core , power limit. 70 = 430ish
1060 6g +100 core , power limit 70 = stable 300
1080 +100 core = stable 530

What manufacturer/edition GTX1060 are you using to get 300 sol/s and which 1070?

[mrtrodonet]

Guys please help the noob..

I created a worker and gave it login and pass

I'm on ubuntu 16.04 trying to run the 0.1.0 miner. Using the following command:
./miner --server zec.suprnova.cc --user myWorkerName --pass MyWorkerPass --port 2142

And get:
+---------------------------------+
| EWBF's Zcash CUDA miner. 0.1.0b |
+---------------------------------+
INFO: Target: 003c3c3c3c3c3c3c...
INFO: Detected new work: 12cd
ERROR: Cannot connect to the server. 9

Any ideas? I can ping the server just fine.

[jiggytom]

Version 0.1.0b is more stable over here.. no more miner crashes even at higher OC..

Thanks!

Contrary for me on 1080. I was able to push previous version higher. 

[mo35]

good job:

1070 +100 core , power limit. 70 = 430ish
1060 6g +100 core , power limit 70 = stable 300
1080 +100 core = stable 530

What's your memory clock on 1080?

Palit GTX1080 GameRock Premium Edition
OC +100core/+400mem (2062/5163mhz)

[mo35]

good job:

1070 +100 core , power limit. 70 = 430ish
1060 6g +100 core , power limit 70 = stable 300
1080 +100 core = stable 530

What manufacturer/edition GTX1060 are you using to get 300 sol/s and which 1070?

1070 MSI Gaming X
1060 Asus ROG Strix

[wll1rah]

Guys please help the noob..

I created a worker and gave it login and pass

I'm on ubuntu 16.04 trying to run the 0.1.0 miner. Using the following command:
./miner --server zec.suprnova.cc --user myWorkerName --pass MyWorkerPass --port 2142

And get:
+---------------------------------+
| EWBF's Zcash CUDA miner. 0.1.0b |
+---------------------------------+
INFO: Target: 003c3c3c3c3c3c3c...
INFO: Detected new work: 12cd
ERROR: Cannot connect to the server. 9

Any ideas? I can ping the server just fine.

./miner --server zec.suprnova.cc --user login.myWorkerName --pass MyWorkerPass --port 2142

It's in the getting started section with examples even

[m1n1ngP4d4w4n]

Guys please help the noob..

I created a worker and gave it login and pass

I'm on ubuntu 16.04 trying to run the 0.1.0 miner. Using the following command:
./miner --server zec.suprnova.cc --user myWorkerName --pass MyWorkerPass --port 2142

And get:
+---------------------------------+
| EWBF's Zcash CUDA miner. 0.1.0b |
+---------------------------------+
INFO: Target: 003c3c3c3c3c3c3c...
INFO: Detected new work: 12cd
ERROR: Cannot connect to the server. 9

Any ideas? I can ping the server just fine.

./miner --server zec.suprnova.cc --user login.myWorkerName --pass MyWorkerPass --port 2142

It's in the getting started section with examples even

./miner --server zec.suprnova.cc --user MyWorkerPass.myWorkerName --pass x --port 2142

You can see your worker complete login in the worker page just have to copy/paste and put it in the --user switch like above.

is what should be used, additionnaly instead of "x" you can use a starting pool difficulty, if you don't know what it is, just let x

also don't use zec.suprnova.cc this is the backup server, use one close to you

zec-eu.suprnova.cc for EU+US
zec-us.suprnova.cc for US

[oldisoft]

Hi, Can you say me what I do wrong?

I have in server window: cannot run workers...

cheers

[m1n1ngP4d4w4n]

Hi, Can you say me what I do wrong?

I have in server window: cannot run workers...

cheers

huuuu... more infos ?

HARDWARE ?
OS ?
command line used to launch miner ?
screenshot with error ?

[oldisoft]

Hi, Can you say me what I do wrong?

I have in server window: cannot run workers...

cheers

huuuu... more infos ?

HARDWARE ?
OS ?
command line used to launch miner ?
screenshot with error ?

window 7, r390x, catalist 15.12 Claymore is working fine