el3c
Newbie
Offline
Activity: 6
Merit: 0
|
|
June 15, 2017, 10:22:50 PM |
|
I am getting great 470 sols for each 1070 while using 146W per card, this ok.... i can also get 420 sols with 107W, both working fine
Did you lower the memory clock and / or the core clock to go down to 107W? On how many V are you running? http://www.fotos-hochladen.net/uploads/after2fh156iodjc.jpgTemp: GPU0: 52C GPU1: 48C GPU0: 428 Sol/s GPU1: 415 Sol/s Total speed: 843 Sol/s +-----+-------------+--------------+ | GPU | Power usage | Efficiency | +-----+-------------+--------------+ | 0 | 107W | 4.00 Sol/W | | 1 | 109W | 3.81 Sol/W | +-----+-------------+--------------+ i am to stupid to upload a pic
|
|
|
|
xxZCASHxx
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 16, 2017, 03:09:04 AM |
|
Just today I started consistently getting this error:
Error: No devices selected
I've restarted, and removed the line --cuda_devices, and it worked once after running it, then after closing and attempting to re-run the batch file, it gives me the same error and closes out. Any ideas?
Also, before this issue, every single day the program would hang when the devfee started. It would somehow timeout and not reconnect to my pool.
|
|
|
|
mcoinm
Newbie
Offline
Activity: 6
Merit: 0
|
|
June 16, 2017, 03:44:29 AM |
|
Hi, I've got a few questions for anybody who uses the miner on linux/ubuntu, don't have very much experience at all with using linux. I've got a few 1080ti's, and I've installed the latest proprietary Nvidia drivers. I've seen people mention installing cuda as well though. Is that necessary, and if so, does it come along with the regular nvidia drivers, or is it something extra to install? Also, compared to the windows version of the miner, do all the same commands work? As in things like fee, pec, etc. Just add them to the config file as extra parameters, under the common section? In addition, is there some convenient place to see the stats as they come in, like the windows command prompt shows you when it's running on windows? I know you can go and see the web console, and see a snapshot of the stats, but there's no equivalent of the constantly running stats that the windows version had?
If you are thinking about mining on linux, you should check out this distro specifically made for nvidia gpu mining https://bitcointalk.org/index.php?topic=1854250.0It's the easiest one to use. I might look into that, saw it before, but thought I'd try it on my own first. On that note, again, to anyone using linux/ubuntu, especially if you have 1080ti's. Does your power tend to bounce around a lot? On windows, when I ran it with a 1080, it would push right up to where I set the limit, with occasional dips. Now on ubuntu with a 1080ti, I'm seeing random drops in power of 25-50+ watts, before it goes back to around what I set it at. Probably the reason I see my clock speed jumping up and down as well.
|
|
|
|
ThemisTea
Newbie
Offline
Activity: 1
Merit: 0
|
|
June 16, 2017, 04:49:14 AM |
|
|
|
|
|
nUm81
|
|
June 16, 2017, 05:42:14 AM |
|
How sharing is more than 100% possible? They are just estimating how many shares it would take to find the solution based on the current difficulty by some statistics. That doesn't mean that you will find the "Solution" always in that number of shares. Some times the pool is lucky and you find the "Solution" in only 800,000 shares, other times its not lucky and takes 23,300,000 shares.
|
|
|
|
leecher2k16
Member
Offline
Activity: 126
Merit: 10
|
|
June 16, 2017, 07:37:29 AM |
|
Hi, question. Having a 1070er Rig (6Cards). In the mining software the cards are reporting stable 475 H/s per Card. But in the pool (flypool) are big drops and highs, its not a stable line like in the mining software.
Any ideas why? I see the CPU is under full throttle (Intel Pentium). Is here a i3 better for cuda mining? Also having only 4GB DDR3 on Board. Maybe 8GB better?
|
|
|
|
hanskan
|
|
June 16, 2017, 08:17:29 AM |
|
MSI GTX 1070 Gaming X 8g > 470-480 Sol/s @ 160W (2.94 Sol/W) - doesn't look to bad i think tweaked with afterburner ? Cant be stock, screenshot of settings please ?
|
|
|
|
sublimus
|
|
June 16, 2017, 10:18:49 AM |
|
Is there a way to fix gpu not restarting properly, it just keeps saying its restarted but thread error 44 and not mining again. I'm now starting all gpus separately so if only one fails the rest are still mining. That taskill loop/restart workaround doesn't want to work.
To have 480sols on 1070 you need to OC, mine is +130/700 and 76 power, voltage is ~0.943, gpu clock is around 1950Mhz, memory 2250 in gpuz.
700 but it crashes. better have only 450s/s and no crash. What do yo think?
|
|
|
|
tomekjoe
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 16, 2017, 10:29:32 AM |
|
Hello guys. A the begining I'm sorry for my english. I have a problem with my mining rig My conf: 6x1070 MSI ARMOR GPU Celeron 4GB DDR4 120SSD MSI Z170 MAINBOARD cooler master 1200w platinum W10 With 6 cards my miner crash about 10 minutes after start, with 5 cards miner works good (18h-24h) without crash. When miner stop one graphic from msi afterburner are dissapear, then i must restart computer. WITH 5 CARDS: http://imgur.com/a/SfzdxMSI AFTERBURNER: http://imgur.com/a/B1NN1CRASH: http://imgur.com/a/dSOYuMY EWBFS: http://imgur.com/a/Uc7iHMaybe I have a bad conf in mainboard bios? Im using newest gpu drivers. Do you have any tips what should i do to work on 6 cards ? MY MINER: http://imgur.com/a/yKemvTHX for help good people
|
|
|
|
gilad215
|
|
June 16, 2017, 10:35:02 AM |
|
Hey guys, i got 2x 1070 and i'm getting some lower results than all of you
i had to put power on 90% +130 clock +680 memory in order to get 435sol
can anyone share how they managed to get the best results for a 1070? thanks
|
Neluns ♦ New Generation Financial Ecosystem ♦ Pre-sale on Aug, 1
|
|
|
el3c
Newbie
Offline
Activity: 6
Merit: 0
|
|
June 16, 2017, 10:47:47 AM |
|
Hi, question. Having a 1070er Rig (6Cards). In the mining software the cards are reporting stable 475 H/s per Card. But in the pool (flypool) are big drops and highs, its not a stable line like in the mining software.
Any ideas why? I see the CPU is under full throttle (Intel Pentium). Is here a i3 better for cuda mining? Also having only 4GB DDR3 on Board. Maybe 8GB better?
dont worry everything is fine! its a issue due to flypool, just wait a minimum of 24h nonstop mining to get a better average. You better use the flypool android app, the app hat more accurate date, because it uses the flypool api. 475sols is very ok, you should take a look to the power usage W/Sols .... go down with power limit 85, overclock gpu about 120, ram about 700 set your fans to 80%
|
|
|
|
el3c
Newbie
Offline
Activity: 6
Merit: 0
|
|
June 16, 2017, 10:58:59 AM |
|
Hey guys, i got 2x 1070 and i'm getting some lower results than all of you
i had to put power on 90% +130 clock +680 memory in order to get 435sol
can anyone share how they managed to get the best results for a 1070? thanks
power 85 core clock 120 memory 700 fan 80% getting 965 sol/s with 150W -> 3.25 SOL/W orpower 61 core clock 150 mem 400 fan 70% getting 855 sol/s with 108W -> 3.9 SOL/W or power 58 core clock 150 mem 400 fan 50% getting 825 sol/s with 101W -> 3.9 SOL/W it just depends how do you have to pay per KW/Hour ... just try your cards, and after every change you made, wait about 10-15 mins to get a accurate data from the miner. I also let the miner restart every 30 Mins and take care, that my cards are still under 60C, because i still use them for gaming.
|
|
|
|
muf18
|
|
June 16, 2017, 11:22:38 AM |
|
I have 2x GTX 1060 3GB (for now, couldn't plug 2 more), and 285-290 sol per card, with 1930mhz and +400mhz mem, +10 power limit. They are using 115-118W, so it's quite a lot, and I wouldn't bother, but I have only 700W power supply with 650W on 12V, so I want to reduce power consumption. Should I lower power limit and clocks? Or only power limit ? Now voltage is around 1.03-1.04V. I want to have about 80-90W/per card so total cards has around 360W and system around 450-460W (not to stress out power supply to the max), and to not reduce the speed to much, is it possible ? Or better go ETH mining/dual mining with nvidia ? With AMD it was a good option, but I don't know if it will be a good option with NV. Also is --fee option still work, or it was only working in previous versions?
|
|
|
|
gilad215
|
|
June 16, 2017, 11:40:56 AM |
|
Hey guys, i got 2x 1070 and i'm getting some lower results than all of you
i had to put power on 90% +130 clock +680 memory in order to get 435sol
can anyone share how they managed to get the best results for a 1070? thanks
power 85 core clock 120 memory 700 fan 80% getting 965 sol/s with 150W -> 3.25 SOL/W orpower 61 core clock 150 mem 400 fan 70% getting 855 sol/s with 108W -> 3.9 SOL/W or power 58 core clock 150 mem 400 fan 50% getting 825 sol/s with 101W -> 3.9 SOL/W it just depends how do you have to pay per KW/Hour ... just try your cards, and after every change you made, wait about 10-15 mins to get a accurate data from the miner. I also let the miner restart every 30 Mins and take care, that my cards are still under 60C, because i still use them for gaming. Using these: power 85 core clock 120 memory 700 fan 80% and getting 850 sol/s i got an EVGA and Palit cards, they perform very good on ETH mining so i find this odd. what else can i try? i'm using windows btw. also, is this miner legit? does mh/s stand for sol/s? Thanks! https://www.cryptocompare.com/mining/calculator/zec?HashingPower=2000&HashingUnit=H%2Fs&PowerConsumption=0&CostPerkWh=0.12
|
Neluns ♦ New Generation Financial Ecosystem ♦ Pre-sale on Aug, 1
|
|
|
muf18
|
|
June 16, 2017, 11:56:56 AM |
|
Every card asic vary thus power draw and voltage and clocks (boost 3.0) vary. So it can vary clock and power draw, as I have seen on my cards, one card can have 1900 while second almost 2000mhz, with same settings.
|
|
|
|
YIz
|
|
June 16, 2017, 12:11:53 PM |
|
Has anyone tried this miner on a GTX 780 TI?
|
|
|
|
dacendoran
Newbie
Offline
Activity: 4
Merit: 0
|
|
June 16, 2017, 01:12:35 PM |
|
I don't understand how I use this Program to mine other Coins than ZEC? For instance I want to try and mine HUSH but I don't see any information on how I would switch coins. Any help would be appreciated!
|
|
|
|
megazz
Newbie
Offline
Activity: 2
Merit: 0
|
|
June 16, 2017, 01:25:53 PM |
|
I don't understand how I use this Program to mine other Coins than ZEC? For instance I want to try and mine HUSH but I don't see any information on how I would switch coins. Any help would be appreciated!
I just changed the pool address and port in the .bat file and I've been mining ZEN without any problems.
|
|
|
|
aquavici
Newbie
Offline
Activity: 14
Merit: 0
|
|
June 16, 2017, 01:36:36 PM |
|
Hi, could somebody tell me what's solver # meaning? differents mining alg?
solver 0 = most recent GPU Thx, could you be more specific? how NOT so recent should be my gpu to use 1 or 2 or 3? does it have to do with cuda CC ver? or just gpu type? is there any table of usage?
|
|
|
|
bf-jack
Newbie
Offline
Activity: 7
Merit: 0
|
|
June 16, 2017, 02:40:41 PM |
|
1070 performance on 0.3.4b? Anyone? I just received my first 1070 yesterday. (an EVGA FTW, just running at stock speeds now) Still new at this, have been using EWBF for about a week. EWBF says ~445 Sol/s, 150W. The watts figure closely matches my Kill-A-Watt. The Sol/s seem reasonable. Good luck! i have 3 EVGA 1070, do like on screenshot and you get 500 sol ) On Samsung Memory ~505, All my card have Micron ( hi bonosurgut, thanks for the info. I just recently starting playing with card settings again. I saw someone else posted about using: power 81 core clock +200 memory +600 fan 80% I'm using that on both 1050ti and 1060 with good initial results. However, in this new rig with 3 cards (1050ti, 1060 and 1070), when I use Afterburner to change settings on the 1070, the system becomes unstable. The changes to 1050ti & 1060 work without issue, but even minor changes to 1070 affect Windows - it locks up for several seconds, EWBF gives error messages, tries to restart the GPUs, work goes to 0. I've only given a minute or so to recover, then usually reboot. Possibly I need a different version of Afterburner (currently 4.30) or Nvidia drivers (382.05). This is on Win10EDU 64bit. Was working well for a week before adding the 1070. Power supply is 750W, should be fine. I'm working toward getting identical cards in each system, but it will be a while. (I thought maybe the extra complexity of different hardware leads to untested situations) I see that your settings go in a different direction, will research this further. Thanks for any suggestions.
|
|
|
|
|