djn053
Newbie
Offline
Activity: 36
Merit: 0
|
|
July 15, 2017, 05:08:38 PM |
|
hi,who can help me something
sometimes will show this
Temp: GPU0: 59C GPU1: 58C GPU2: 64C GPU3: 67C GPU4: 62C GPU5: 63C GPU6: 68C INFO 00:12:47: GPU2 Accepted share 46ms [A:19, R:0] GPU0: 384 Sol/s GPU1: 550 Sol/s GPU2: 551 Sol/s GPU3: 542 Sol/s GPU4: 549 Sol/s GPU5: 549 Sol/s GPU6: 296 Sol/s Total speed: 3421 Sol/s INFO 00:12:49: GPU4 Accepted share 47ms [A:14, R:0] INFO 00:12:49: GPU1 Accepted share 49ms [A:17, R:0] INFO 00:12:51: GPU2 Accepted share 43ms [A:20, R:0] INFO 00:12:56: GPU5 Accepted share 44ms [A:22, R:0] INFO 00:13:04: GPU0 Accepted share 43ms [A:15, R:0] INFO 00:13:08: GPU0 Accepted share 43ms [A:16, R:0] INFO 00:13:15: GPU5 Accepted share 44ms [A:23, R:0] Temp: GPU0: 58C GPU1: 58C GPU2: 64C GPU3: 67C GPU4: 62C GPU5: 63C GPU6: 67C GPU0: 376 Sol/s GPU1: 543 Sol/s GPU2: 551 Sol/s GPU3: 546 Sol/s GPU4: 543 Sol/s GPU5: 546 Sol/s GPU6: 293 Sol/s Total speed: 3398 Sol/s INFO 00:13:17: GPU4 devfee rejected share INFO 00:13:19: GPU3 devfee rejected share INFO 00:13:22: GPU1 devfee rejected share INFO 00:13:26: GPU2 devfee rejected share INFO 00:13:28: GPU0 devfee rejected share
I do nothing of this software,how can I fixed it??
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
sublimus
|
|
July 15, 2017, 05:38:09 PM |
|
hi,who can help me something
sometimes will show this
Temp: GPU0: 59C GPU1: 58C GPU2: 64C GPU3: 67C GPU4: 62C GPU5: 63C GPU6: 68C INFO 00:12:47: GPU2 Accepted share 46ms [A:19, R:0] GPU0: 384 Sol/s GPU1: 550 Sol/s GPU2: 551 Sol/s GPU3: 542 Sol/s GPU4: 549 Sol/s GPU5: 549 Sol/s GPU6: 296 Sol/s Total speed: 3421 Sol/s INFO 00:12:49: GPU4 Accepted share 47ms [A:14, R:0] INFO 00:12:49: GPU1 Accepted share 49ms [A:17, R:0] INFO 00:12:51: GPU2 Accepted share 43ms [A:20, R:0] INFO 00:12:56: GPU5 Accepted share 44ms [A:22, R:0] INFO 00:13:04: GPU0 Accepted share 43ms [A:15, R:0] INFO 00:13:08: GPU0 Accepted share 43ms [A:16, R:0] INFO 00:13:15: GPU5 Accepted share 44ms [A:23, R:0] Temp: GPU0: 58C GPU1: 58C GPU2: 64C GPU3: 67C GPU4: 62C GPU5: 63C GPU6: 67C GPU0: 376 Sol/s GPU1: 543 Sol/s GPU2: 551 Sol/s GPU3: 546 Sol/s GPU4: 543 Sol/s GPU5: 546 Sol/s GPU6: 293 Sol/s Total speed: 3398 Sol/s INFO 00:13:17: GPU4 devfee rejected share INFO 00:13:19: GPU3 devfee rejected share INFO 00:13:22: GPU1 devfee rejected share INFO 00:13:26: GPU2 devfee rejected share INFO 00:13:28: GPU0 devfee rejected share
I do nothing of this software,how can I fixed it??
What do you think "devfee" means?
|
|
|
|
djn053
Newbie
Offline
Activity: 36
Merit: 0
|
|
July 16, 2017, 03:00:57 AM Last edit: July 16, 2017, 03:14:56 AM by djn053 |
|
hi,who can help me something
sometimes will show this
Temp: GPU0: 59C GPU1: 58C GPU2: 64C GPU3: 67C GPU4: 62C GPU5: 63C GPU6: 68C INFO 00:12:47: GPU2 Accepted share 46ms [A:19, R:0] GPU0: 384 Sol/s GPU1: 550 Sol/s GPU2: 551 Sol/s GPU3: 542 Sol/s GPU4: 549 Sol/s GPU5: 549 Sol/s GPU6: 296 Sol/s Total speed: 3421 Sol/s INFO 00:12:49: GPU4 Accepted share 47ms [A:14, R:0] INFO 00:12:49: GPU1 Accepted share 49ms [A:17, R:0] INFO 00:12:51: GPU2 Accepted share 43ms [A:20, R:0] INFO 00:12:56: GPU5 Accepted share 44ms [A:22, R:0] INFO 00:13:04: GPU0 Accepted share 43ms [A:15, R:0] INFO 00:13:08: GPU0 Accepted share 43ms [A:16, R:0] INFO 00:13:15: GPU5 Accepted share 44ms [A:23, R:0] Temp: GPU0: 58C GPU1: 58C GPU2: 64C GPU3: 67C GPU4: 62C GPU5: 63C GPU6: 67C GPU0: 376 Sol/s GPU1: 543 Sol/s GPU2: 551 Sol/s GPU3: 546 Sol/s GPU4: 543 Sol/s GPU5: 546 Sol/s GPU6: 293 Sol/s Total speed: 3398 Sol/s INFO 00:13:17: GPU4 devfee rejected share INFO 00:13:19: GPU3 devfee rejected share INFO 00:13:22: GPU1 devfee rejected share INFO 00:13:26: GPU2 devfee rejected share INFO 00:13:28: GPU0 devfee rejected share
I do nothing of this software,how can I fixed it??
What do you think "devfee" means? I know nothing about it, I used a command as this to run: miner --server cn1-zcash.flypool.org --port 3333 --user t1gqN6vHzxgyheYiLUsTg1J6PMfoZJJTiwm.rig0 --pass xsomeone tell me maybe about pay for development,but I don't know how to do?? Alway sometimes would show this: INFO 00:13:26: GPUX devfee Accepted shareBut sometimes show: INFO 00:13:26: GPUX devfee rejected shareI don't konw what's wrong with my computer or software or my network? PLS help me to fix.....
|
|
|
|
mforce
Newbie
Offline
Activity: 12
Merit: 0
|
|
July 16, 2017, 04:00:01 AM |
|
I know nothing about it, I used a command as this to run:
miner --server cn1-zcash.flypool.org --port 3333 --user t1gqN6vHzxgyheYiLUsTg1J6PMfoZJJTiwm.rig0 --pass x
someone tell me maybe about pay for development,but I don't know how to do??
Alway sometimes would show this:
INFO 00:13:26: GPUX devfee Accepted share
But sometimes show:
INFO 00:13:26: GPUX devfee rejected share
I don't konw what's wrong with my computer or software or my network?
PLS help me to fix.....
You can disable developer fee by adding "--fee 0" to your miner parameters
|
|
|
|
QuintLeo
Legendary
Offline
Activity: 1498
Merit: 1030
|
|
July 16, 2017, 07:37:10 AM |
|
Power consumption is really bad on gtx 9xx series. Compare with gtx 10xx series The GTX 10xx series went to a new, much smaller process node - OF COURSE it's more power efficient. Performance - didn't increase nearly as much, the 980ti is pretty close to the 1080 and often a little better on a lot of stuff, and at WORST is still better than the 1070 on everything I've seen comparisons of the two on.
|
I'm no longer legendary just in my own mind! Like something I said? Donations gratefully accepted. LYLnTKvLefz9izJFUvEGQEZzSkz34b3N6U (Litecoin) 1GYbjMTPdCuV7dci3iCUiaRrcNuaiQrVYY (Bitcoin)
|
|
|
Chipychop
Member
Offline
Activity: 91
Merit: 10
|
|
July 16, 2017, 09:03:54 AM |
|
can anyone tell me how to check efficiency on this miner?
thanks in advance!
|
|
|
|
octra
Newbie
Offline
Activity: 7
Merit: 0
|
|
July 16, 2017, 09:35:23 AM |
|
can anyone tell me how to check efficiency on this miner?
run with '--pec 1' parameter.
|
|
|
|
sublimus
|
|
July 16, 2017, 09:57:29 AM |
|
INFO 00:13:26: GPUX devfee Accepted share
But sometimes show:
INFO 00:13:26: GPUX devfee rejected share
I don't konw what's wrong with my computer or software or my network?
PLS help me to fix.....
[/quote]
You can disable developer fee by adding "--fee 0" to your miner parameters [/quote]
There is nothing to fix from your side. And it is not by not paying the developper's fee (yeah devfee) that you will help making a better miner. Please DO NOT follow advice from someone that knows less than you (by --fee 0).
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
July 16, 2017, 01:22:18 PM |
|
Dont worry about the devfee share rejected thing. It doesnt do anything, its just the share is rejected, there is no consequence. Dev fee will mine at the same time as your mining I think so you can just ignore it.
|
|
|
|
Jdope
|
|
July 16, 2017, 04:48:00 PM |
|
Does anyone know what caused the exited with error 46 problem?
I have a gtx 1080 mining zec with ewbf and a gtx 1060 mining eth with claymore, after like a day or so of continous work i get an error exited with code 46 and claymore's show a "can't get temprature, driver error", its caused by the ewbf but i have no idea why.
|
|
|
|
The_Immortal
Newbie
Offline
Activity: 55
Merit: 0
|
|
July 16, 2017, 10:35:04 PM |
|
scryptr, Guys, could you tell me please how to see the average hashrate on the miner? I know that pools show this info but it's incorrect sometimes.
So I can see only current speed...
Thank you!
You have to wait approx 24 hrs before you seen an accurate average hashrate. For example, nanopool gives you pretty wild current hashrates, but their 6hr, 12hr and 24hr hashrates give you a good overall average. Dude, I've been waiting for a month and still see incorrect speeds. So anyway the miner must have the possibility to show average speed on its side. POOL HASHRATE CALCULATED BY SHARES ACCEPTED-- And the miner calculates hashrate based on cycles of the algorithm. The pool goes by work received, the miner by work cycles done. There is room for error between the two. --scryptr Which "room" are u talking about? Between a pool and a miner? Didn't get it. And anyway I wanna see the average speed on the miner side just to be sure everything is ok on my side (make sense? I think it does). How to do this? THE HASHRATES ARE DETERMINED DIFFERENTLY-- So, there is a margin for error. Network signal lag, pool mining load, and the computational difference between actual hash cycles (miner) and frequency of accepted shares (pool) are causes for error. --scryptr I got you, man. But anyway: I wanna see the average speed on the miner side just to be sure everything is ok on my side (make sense? I think it does).
|
|
|
|
djn053
Newbie
Offline
Activity: 36
Merit: 0
|
|
July 17, 2017, 02:19:32 AM |
|
INFO 00:13:26: GPUX devfee Accepted share
But sometimes show:
INFO 00:13:26: GPUX devfee rejected share
I don't konw what's wrong with my computer or software or my network?
PLS help me to fix.....
You can disable developer fee by adding "--fee 0" to your miner parameters
There is nothing to fix from your side. And it is not by not paying the developper's fee (yeah devfee) that you will help making a better miner. Please DO NOT follow advice from someone that knows less than you (by --fee 0).
Yes,I agree with you. But I count the devfee share today, its more than 2%......more than double ever..... I find sometime's file to count it, about 251 devfee share, and 5881 accepted share 251/5881=4.26%
|
|
|
|
bread22
Newbie
Offline
Activity: 8
Merit: 0
|
|
July 17, 2017, 02:22:23 AM |
|
I tried to download, but virus is detected???
|
|
|
|
fr4nkthetank
Legendary
Offline
Activity: 2294
Merit: 1182
Now the money is free, and so the people will be
|
|
July 17, 2017, 03:55:58 AM |
|
the number of shares doesnt indicate the % of devfee like you think - most pools have dynamic difficulty for shares, so when you start mining difficulty is low, and then gets harder so you send the pool on average x number of shares per minute for example. So the devfee shares vs your shares arent the same, because you dont know what difficulty each share is ! Set a dev fee in you config file that you think is fair and that should be good !
|
|
|
|
NameTaken
|
|
July 17, 2017, 05:17:56 AM |
|
Пoдcкaжитe, кaким oбpaзoм нacтpoить aвтoзaпycк мaйнepa в Linux в видe дeмoнa. Пpи зaгpyзкe cиcтeмы нe xoчeт cтapтoвaть =( Oпepaтop вывoдa ">" ничeгo нe пишeт в фaйл, ecли тaкoвoй eмy yкaзaть.
Haпиcaл вoт тaкoй cтapтoвый cкpипт.
Лиcтинг /etc/init.d/miner:
#!/bin/bash
### BEGIN INIT INFO # Provides: miner # Required-Start: $local_fs $remote_fs x11-common lightdm # Required-Stop: $local_fs $remote_fs # Should-Start: $network # Should-Stop: $network # Default-Start: 5 # Default-Stop: 0 1 6 # Short-Description: Zcash miner # Description: This runs a script continuously in miner. ### END INIT INFO
case "$1" in
start) echo "Starting miner Zcash" /usr/local/bin/fans.sh /usr/local/bin/miner > /dev/null 2> /dev/null & ;; stop) echo "Stopping miner Zcash" PID=`ps -ef | grep miner | grep -v grep | awk '{print $2}'` kill -9 $PID ;;
restart|force-reload) echo "Restarting $screen" PID=`ps -ef | grep miner | grep -v grep | awk '{print $2}'` kill -9 $PID sleep 15 /usr/local/bin/fans.sh /usr/local/bin/miner > /dev/null 2> /dev/null & ;; esac exit 0
Лиcтинг /usr/local/bin/fans.sh
#/bin/bash
SPEED=75 MEMORY=700 CLOCK=50
DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/:0 /usr/bin/nvidia-settings -a "[gpu:0]/GPUFanControlState=1" -a "[fan:0]/GPUTargetFanSpeed=$SPEED" DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/:0 /usr/bin/nvidia-settings -a "[gpu:1]/GPUFanControlState=1" -a "[fan:1]/GPUTargetFanSpeed=$SPEED" DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/:0 /usr/bin/nvidia-settings -a "[gpu:2]/GPUFanControlState=1" -a "[fan:2]/GPUTargetFanSpeed=$SPEED" DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/:0 /usr/bin/nvidia-settings -a "[gpu:3]/GPUFanControlState=1" -a "[fan:3]/GPUTargetFanSpeed=$SPEED" DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/:0 /usr/bin/nvidia-settings -a "[gpu:4]/GPUFanControlState=1" -a "[fan:4]/GPUTargetFanSpeed=$SPEED" DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/:0 /usr/bin/nvidia-settings -a "[gpu:5]/GPUFanControlState=1" -a "[fan:5]/GPUTargetFanSpeed=$SPEED"
DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/:0 /usr/bin/nvidia-settings -a "[gpu:0]/GPUMemoryTransferRateOffset[3]=$MEMORY" -a "[gpu:0]/GPUGraphicsClockOffset[3]=$CLOCK" DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/:0 /usr/bin/nvidia-settings -a "[gpu:1]/GPUMemoryTransferRateOffset[3]=$MEMORY" -a "[gpu:1]/GPUGraphicsClockOffset[3]=$CLOCK" DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/:0 /usr/bin/nvidia-settings -a "[gpu:2]/GPUMemoryTransferRateOffset[3]=$MEMORY" -a "[gpu:2]/GPUGraphicsClockOffset[3]=$CLOCK" DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/:0 /usr/bin/nvidia-settings -a "[gpu:3]/GPUMemoryTransferRateOffset[3]=$MEMORY" -a "[gpu:3]/GPUGraphicsClockOffset[3]=$CLOCK" DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/:0 /usr/bin/nvidia-settings -a "[gpu:4]/GPUMemoryTransferRateOffset[3]=$MEMORY" -a "[gpu:4]/GPUGraphicsClockOffset[3]=$CLOCK" DISPLAY=:0 XAUTHORITY=/var/run/lightdm/root/:0 /usr/bin/nvidia-settings -a "[gpu:5]/GPUMemoryTransferRateOffset[3]=$MEMORY" -a "[gpu:5]/GPUGraphicsClockOffset[3]=$CLOCK"
Use a Systemd unit file e.g. [Unit] Description=Zcash Service Wants=lightdm.service network-online.target After=lightdm.service network-online.target
[Service] Environment=DISPLAY=:0 Environment=SPEED=75 Environment=CLOCK=50 Environment=MEMORY=700 ExecStartPre=-/usr/bin/nvidia-settings -a "[gpu:0]/GPUFanControlState=1" -a "[fan:0]/GPUTargetFanSpeed=${SPEED}" -a "[gpu:0]/GPUGraphicsClockOffset[3]=${CLOCK}" -a "[gpu:0]/GPUMemoryTransferRateOffset[3]=${MEMORY}" ExecStart=/usr/bin/stdbuf -oL /usr/local/bin/miner --config miner.cfg ExecReload=/bin/kill -HUP $MAINPID
WorkingDirectory=/opt/zcash/ KillMode=mixed RestartSec=10s Restart=always TimeoutStopSec=10 Nice=-20 ProtectSystem=full ProtectHome=yes
[Install] WantedBy=multi-user.target
|
|
|
|
sublimus
|
|
July 17, 2017, 11:22:34 AM |
|
Yes,I agree with you. But I count the devfee share today, its more than 2%......more than double ever..... I find sometime's file to count it, about 251 devfee share, and 5881 accepted share 251/5881=4.26%
Dev shares are rejected simply because some other miner submitted the solution before you.
|
|
|
|
milospinkfloyd
Newbie
Offline
Activity: 18
Merit: 0
|
|
July 17, 2017, 12:09:51 PM |
|
not a chance to run ewbf miner, crashes and exit on start. Last win 10 pro 64, last drivers. H270 plus, gigabyte g1 1050ti. Claymore runs perfect
|
|
|
|
talenat92
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 17, 2017, 12:58:16 PM |
|
anyone knows anything about thread exit code 30?
|
|
|
|
Temporel
|
|
July 17, 2017, 01:31:04 PM |
|
not a chance to run ewbf miner, crashes and exit on start. Last win 10 pro 64, last drivers. H270 plus, gigabyte g1 1050ti. Claymore runs perfect
I run EWBF on 3 rigs, no issue.
|
|
|
|
giagge
Legendary
Offline
Activity: 1134
Merit: 1001
|
|
July 17, 2017, 03:48:47 PM |
|
EWBF what you think the maximum speed for gtx 1070 is ? .
|
|
|
|
|