aleksandr150985
Newbie
 Offline
Activity: 1
Merit: 0
|
 |
April 10, 2018, 05:30:05 PM
Last edit: April 13, 2018, 12:18:54 PM by aleksandr150985 |
|
Hello to all the miners Help me figure out the problem 1. I start the miner I have 4 cards 1060 ayrus and this picture shows on the cards for example 1G 300 2G200 3G300 4G300 then the minor restart 1G 300 2G 240 3G 300 4G 300 then 1G 300 2G 190 3G300 4G again 300 and so can restart 10 times until it's normal to get 1G 300 2G 300 3G 300 4G 300 2. The problem I launch the miner everything is OK can fly right away can after 10 hours here do not guess (I will immediately describe the moments of the raiser driver swap file and all that's worth it and everything changed picture does not change the mother gigabyte h270-hd3 may uzeee from another takaee mother and cards on it hangs and neither does everything work [img] https://prnt.sc/j3fy7k [/ img] who faced a similar problem write help All Thanks. |
|
|
|
|
|
|
|
|
|
|
|
Bitcoin mining is now a specialized and very risky industry, just like gold mining. Amateur miners are unlikely to make much money, and may even lose money. Bitcoin is much more than just mining, though!
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
|
|
|
ala12uk
Newbie
Offline
Activity: 16
Merit: 1
|
 |
April 12, 2018, 01:53:00 PM |
|
Hi All,
I have 10 Zotac 1080 TI Extreme GPUs, running on windows 10, 64 bit.
Windows updates & Nvidia drivers are all the latest
I have 3 GPUs out of the 7, which start hashing at 750 Sol, but after few minutes they drop all the way down to ~300 or even ~250
I have tried different power risers, different PSUs, different PCIe slots, nothing has helped
The same 3 GPUs will always start at 750 and go down to ~300
The same 7 GPUs will start at 750 and stay at the same level, no matter how i swap the PSUs, powered risers, slots, sockets, etc...
The display is connected directly to the motherboard not to any GPU All GPUs has power state of P2, so i dont believe that one will do 750 and the other 250 because of this
I tried different miners, but the two showed absolutely the same result. 3 GPUs badly perform and 7 perform very well
I noticed that "memory controller load" on the high performing GPUs is about 80% while on the badly performing GPUs is around 55%, using Hardware Info software. Is this the root cause? Any idea how can i fix this?
|
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
April 12, 2018, 02:33:51 PM |
|
Hi All,
I have 10 Zotac 1080 TI Extreme GPUs, running on windows 10, 64 bit.
Windows updates & Nvidia drivers are all the latest
I have 3 GPUs out of the 7, which start hashing at 750 Sol, but after few minutes they drop all the way down to ~300 or even ~250
I have tried different power risers, different PSUs, different PCIe slots, nothing has helped
The same 3 GPUs will always start at 750 and go down to ~300
The same 7 GPUs will start at 750 and stay at the same level, no matter how i swap the PSUs, powered risers, slots, sockets, etc...
The display is connected directly to the motherboard not to any GPU All GPUs has power state of P2, so i dont believe that one will do 750 and the other 250 because of this
I tried different miners, but the two showed absolutely the same result. 3 GPUs badly perform and 7 perform very well
I noticed that "memory controller load" on the high performing GPUs is about 80% while on the badly performing GPUs is around 55%, using Hardware Info software. Is this the root cause? Any idea how can i fix this?
did the 10 GPU all connected to a single rig? hows your PSU setup? with that number of GPU's, try to set higher Virtual mem also how do you do your clocks? try to do downclock a bit just for isolations |
|
|
|
|
ala12uk
Newbie
Offline
Activity: 16
Merit: 1
|
|
April 12, 2018, 03:42:49 PM |
|
did the 10 GPU all connected to a single rig?
Yes, the 10 GPUs are all connected to the same rig
If i run one GPU or 3 or 7 or 10, always the same 3 GPUs will underperform and the 7 will perform well, which makes me doubtful that it is some resource issue from the rig. Also i unplugged the power cable from a high performing GPU and plugged into a low poerforming GPU and did not help, I also took the powered riser from the high performing GPU to a low performing GPU and did not help
hows your PSU setup?
Evga 1600 has 4 GPUs
BeQuite 1200 has 3 GPUs
But again, with one single GPU on the Evga 1600 the bad performing GPU will still perform bad
with that number of GPU's, try to set higher Virtual mem
I have 80 GB virtual memory
With one single GPU still it will slow down to ~250 to ~350
also how do you do your clocks?
Default only
try to do downclock a bit just for isolations
Which i reduce the intensity of the miner, the bad performing GPUs go up from 250 Sol to 350 Sol, but this is still very far from the 750 Sol or even just 700 Sol like all other GPUs
I tried several times to uninstall with DDU and reinstall all over again, no change
I am wondering if it is a software issue?
would reinstalling windows from scratch help? taking into consideration that no matter how i play around with the GPUs the low performers will always perform lower no matter if you give the the power cables and powered risers and PCIe slot of a high performer. makes me doubt if it is Windows issue
The only thing i could spot is the "memory controller load"
I have googled it quite a bit with no success
|
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
April 12, 2018, 03:53:28 PM |
|
did the 10 GPU all connected to a single rig?
Yes, the 10 GPUs are all connected to the same rig
If i run one GPU or 3 or 7 or 10, always the same 3 GPUs will underperform and the 7 will perform well, which makes me doubtful that it is some resource issue from the rig. Also i unplugged the power cable from a high performing GPU and plugged into a low poerforming GPU and did not help, I also took the powered riser from the high performing GPU to a low performing GPU and did not help
hows your PSU setup?
Evga 1600 has 4 GPUs
BeQuite 1200 has 3 GPUs
But again, with one single GPU on the Evga 1600 the bad performing GPU will still perform bad
with that number of GPU's, try to set higher Virtual mem
I have 80 GB virtual memory
With one single GPU still it will slow down to ~250 to ~350
also how do you do your clocks?
Default only
try to do downclock a bit just for isolations
Which i reduce the intensity of the miner, the bad performing GPUs go up from 250 Sol to 350 Sol, but this is still very far from the 750 Sol or even just 700 Sol like all other GPUs
I tried several times to uninstall with DDU and reinstall all over again, no change
I am wondering if it is a software issue?
would reinstalling windows from scratch help? taking into consideration that no matter how i play around with the GPUs the low performers will always perform lower no matter if you give the the power cables and powered risers and PCIe slot of a high performer. makes me doubt if it is Windows issue
The only thing i could spot is the "memory controller load"
I have googled it quite a bit with no success
Try to use, Overclocking tool such as MSI AB or Overdriven tool and play with clocks on the affected GPU card, much better if you install this solely without other cards while doing troubleshoots this is good read and also my reference for doing 1080ti clocks https://bitcointalk.org/index.php?topic=1940567.0 |
|
|
|
|
ala12uk
Newbie
Offline
Activity: 16
Merit: 1
|
|
April 13, 2018, 06:07:56 PM |
|
Try to use, Overclocking tool such as MSI AB or Overdriven tool and play with clocks on the affected GPU card, much better if you install this solely without other cards while doing troubleshoots this is good read and also my reference for doing 1080ti clocks https://bitcointalk.org/index.php?topic=1940567.0The problem turned out to be that those 3 GPUs throttle at 67 degrees C, which is quite strange. The only assumption that i have is that such config is in their BIOS. I have tried different software like MSI AB, nothing has helped. The soonest they reach a temp of 67 C, the "memory controller load" drops from ~80% to ~50% then the hashrate drops from 750 Sol to 250 Sol I did not dare to manipulated an encrypted BIOS, so i just reduced the power limit from 100% to 70% and set the fan manually on 55%. this way i keep the temp between 55 to 65 without hitting the 67 limit that those GPUs have. I hope you find this helpful! |
|
|
|
|
leonix007
Sr. Member
Offline
Activity: 1008
Merit: 297
Grow with community
|
|
April 14, 2018, 02:31:25 AM |
|
Try to use, Overclocking tool such as MSI AB or Overdriven tool and play with clocks on the affected GPU card, much better if you install this solely without other cards while doing troubleshoots this is good read and also my reference for doing 1080ti clocks https://bitcointalk.org/index.php?topic=1940567.0The problem turned out to be that those 3 GPUs throttle at 67 degrees C, which is quite strange. The only assumption that i have is that such config is in their BIOS. I have tried different software like MSI AB, nothing has helped. The soonest they reach a temp of 67 C, the "memory controller load" drops from ~80% to ~50% then the hashrate drops from 750 Sol to 250 Sol I did not dare to manipulated an encrypted BIOS, so i just reduced the power limit from 100% to 70% and set the fan manually on 55%. this way i keep the temp between 55 to 65 without hitting the 67 limit that those GPUs have. I hope you find this helpful! Weird though, well at least you got his working spots, glad to hear |
|
|
|
|
|
timbereagle
|
|
April 14, 2018, 10:10:10 AM |
|
Wow, dev did not write to any topic since last July. But I have to admit that his miner is very good. I hope he got good amount of coins!
|
|
|
|
|
|
|
|
|
|
sublimus
|
|
April 14, 2018, 06:43:45 PM |
|
630 sols/s нa GTX 1070
wow
Looks like someone updated it to perform better with older GPUs.
|
|
|
|
Mastker
Newbie
Offline
Activity: 62
Merit: 0
|
|
April 15, 2018, 10:06:13 AM |
|
630 sols/s нa GTX 1070
wow
Looks like someone updated it to perform better with older GPUs.
Where did you get this number? |
|
|
|
|
ztaz
Member
Offline
Activity: 602
Merit: 11
|
|
April 15, 2018, 10:27:56 AM |
|
630 sols/s нa GTX 1070
wow
Looks like someone updated it to perform better with older GPUs.
Where did you get this number? in the topic of the link - which I gave - but this topic has already been removed from the campaign - apparently this is another fake with the viruses inside ... By the way, it's not the first time they are debugging a "new version"  |
|
|
|
|
|
timbereagle
|
|
April 15, 2018, 02:16:56 PM |
|
Wow I did not know how much he collected over 22.000 Zcash. Probably he made over 3 Million USD!. Anyway he made good miner. I also contributed his zcash a lot as I mine Zcash with 60 GPUs with his miner for about 5-6 months. |
|
|
|
|
|
sublimus
|
|
April 15, 2018, 05:22:26 PM |
|
630 sols/s нa GTX 1070
wow
Looks like someone updated it to perform better with older GPUs.
Where did you get this number? From the bitcointalk link in the comment 5887. Curiously I cant access it anymore |
|
|
|
CybeRoky
Newbie
Offline
Activity: 66
Merit: 0
|
|
April 17, 2018, 08:03:58 PM |
|
Why is there no new version of this miner, more then 6 mounts.. Is this a dead project?
|
|
|
|
|
jackbox
Legendary
Offline
Activity: 1246
Merit: 1024
|
|
April 18, 2018, 04:28:01 AM |
|
Why is there no new version of this miner, more then 6 mounts.. Is this a dead project?
Yes. It was abandoned a while ago. There will never be any new updates to this miner. I suggest you use it in "--nofee" node. No speed hit to do so. |
|
|
|
nitrobg
Member
Offline
Activity: 413
Merit: 17
|
|
April 18, 2018, 05:17:42 AM |
|
Why is there no new version of this miner, more then 6 mounts.. Is this a dead project?
Yes. It was abandoned a while ago. There will never be any new updates to this miner. I suggest you use it in "--nofee" node. No speed hit to do so. No visible speed hit, but the real earnings drop by 5-ish percent. Move to DSTM, it is better than this one. |
|
|
|
|
|
Sam San
|
|
April 21, 2018, 05:05:01 AM |
|
Why is there no new version of this miner, more then 6 mounts.. Is this a dead project?
Yes. It was abandoned a while ago. There will never be any new updates to this miner. I suggest you use it in "--nofee" node. No speed hit to do so. No visible speed hit, but the real earnings drop by 5-ish percent. Move to DSTM, it is better than this one. Switch to DSTM, is this better than this? he is better than the performance does not pull new versions, so this half a year plows without the updates and the extra work to configure and reconfigure. what is better EWBF's CUDA Zcash miner? |
|
|
|
gameminerv4g5
Newbie
Offline
Activity: 2
Merit: 0
|
|
April 26, 2018, 11:55:22 AM |
|
Running windows 10 I cannot get ewbf to run on a task scheduler. I would like to have the miner stop when I start a game and start when I end that game program. Is this possible? When I create task to run minder.exe I use ever combination of start in folder, and adding the config file to the arguments box. Both with and without quotes. Also thank you for the excellent miner.
|
|
|
|
|
|
