HELP - Can not find Antminer S7 on my network ??

[bilabonic]

Hi All

I just purchased an S7 with bitmain psu and i asked the seller to change the IP to static and to 192.168.1.51.

I asked this as i have 17 miners running and did not want any conflict/plug and play..

I run Angry IP scanner and had 19 devices found BEFORE i plugged in new miner.

I then powered up new miner, tried it's address 192.168.1.51 and would not connect !!!

I done another scan and STILL 19 devices.......

I have just tried IPReporter from the Bitmain Guide, ran it, pressed the IP Reporter button and had NO beep ? Kept my finger on it and it beeped BUT nothing is showing in IPReporter ?

Anyone help ??

Thanks

[bilabonic]

Done a HARD RESET and found it.... 

[sebtic]

Done a HARD RESET and found it.... 

Hello m8! i have the same problem, how did you perform the Hard Reset ? its the same way as the normal reset button in the IO board ?

[blankwot]

You must be missing something bro. Try resetting everything and start it again.

[bwstacker1]

If you are usiing windows its easy to find your miners. Dowload a free app calledip scanner and do a scan of you network . It will pop up . It might not be ant miner but its got to be there . Make sure that you are using a router that has a ip address of 192.168.1.1. That seems to slim problems alot. Most cable companys have switched to modem that carry ip's like 192.168.0.1. This will lock your miner out of the network. After you access the miner you can change ip to static. DCHP tends to give miners different ip's sometimes if off for awhile.