skablast
Member
Offline
Activity: 476
Merit: 19
|
|
January 29, 2018, 12:43:24 PM |
|
I have copied the log. Well, the part that I thought to be interesting... but i don't think I found much
A couple of thing from someone that last thing I have programmed was a text only adventure....
Please create a log / session or a log/day in order to make life easier to retrieve it
The one minute hashrate report just add garbage, its interesting for testing, but real life a 10 minutes is fine.
I noticed you have created one devfee wallet / algo, good choice it will easy the switch
|
|
|
|
yurez83
Member
Offline
Activity: 420
Merit: 28
|
|
January 29, 2018, 02:28:43 PM |
|
version 1.2.10 Now the hashrate seems be stable after switching, but....no shares...So, after switching back to my pool there are no shares to it, while cards are mining well.
It must be your pool, then. Which coin are you mining at which pool? Confirm this problem on some pools, zpool and mine, in both tested Neoscrypt, after some time workers disappear at pools, but app still works and load GPU 100% I confirm. Also such a problem is Gateless Gate Sharp 1.2.10 (NeoScrypt). in the miner the extraction is normal, but the miner disappears on the pool. I so understand it happens after reconnecting to the pool (lycheebit.com) .. on other pools, too, such a problem, so I think it's not a problem in them. today I'll try version 1.2.11 - I will write about the result. I installed version 1.2.11 and the problem with the drop-out of the pool seems to be missing. thanks for the prompt decision. now I have a few questions from others. -------------------------------------------------------------------------------------------------------------------------------- which means the string that sometimes appears: [9] Unknown stratum method: {"id": null, "method": "client.show_message", "params": ["welcome on ALTMINER.NET - happy mining!"]} the second question - began to appear "Invalid share". for 4 hours approximately 2-3%. Previously, they were not. --------------------------------------------------------------------------------------------------------------------------------- Yes, and the last question. Can I make custom panel colors? Some color combinations of numbers are indistinguishable against the background by default.
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 29, 2018, 06:20:58 PM |
|
I installed version 1.2.11 and the problem with the drop-out of the pool seems to be missing. thanks for the prompt decision. now I have a few questions from others. -------------------------------------------------------------------------------------------------------------------------------- which means the string that sometimes appears: [9] Unknown stratum method: {"id": null, "method": "client.show_message", "params": ["welcome on ALTMINER.NET - happy mining!"]}
the second question - began to appear "Invalid share". for 4 hours approximately 2-3%. Previously, they were not. ---------------------------------------------------------------------------------------------------------------------------------
Yes, and the last question. Can I make custom panel colors? Some color combinations of numbers are indistinguishable against the background by default.
(1) That message is pretty harmless. You can ignore it. (2) I'm uploading v1.2.12 right now. Please try it first. (3) I changed colors a little bit with v.1.2.12. Please let me know if that would work for you. I could let the user change the color scheme, but that is not a priority at this point.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
yurez83
Member
Offline
Activity: 420
Merit: 28
|
|
January 29, 2018, 06:44:12 PM |
|
I installed version 1.2.11 and the problem with the drop-out of the pool seems to be missing. thanks for the prompt decision. now I have a few questions from others. -------------------------------------------------------------------------------------------------------------------------------- which means the string that sometimes appears: [9] Unknown stratum method: {"id": null, "method": "client.show_message", "params": ["welcome on ALTMINER.NET - happy mining!"]}
the second question - began to appear "Invalid share". for 4 hours approximately 2-3%. Previously, they were not. ---------------------------------------------------------------------------------------------------------------------------------
Yes, and the last question. Can I make custom panel colors? Some color combinations of numbers are indistinguishable against the background by default.
(1) That message is pretty harmless. You can ignore it. (2) I'm uploading v1.2.12 right now. Please try it first. (3) I changed colors a little bit with v.1.2.12. Please let me know if that would work for you. I could let the user change the color scheme, but that is not a priority at this point. Thanks for the answer. Please tell me where can I download the version v.1.2.12? I can not find her. Another small question. Do you recommend installing the driver for the video card, the link to which is in your program (for AMD 17.12.2)?
|
|
|
|
|
oxothuk
Member
Offline
Activity: 71
Merit: 10
|
|
January 29, 2018, 07:10:12 PM |
|
Thank you for your fast work... Problem with pools disappear, great.. but after 3-4 hours of work, number of rejects from pool grow... and now it about 30-40% ()ested on v1.2.11) Can it be related to thread management? PS: Do you plan add cpu miners ? (sorry if you already answered, didn`t read whole thread. )
|
|
|
|
yurez83
Member
Offline
Activity: 420
Merit: 28
|
|
January 29, 2018, 07:23:50 PM |
|
Thank you!! Colors are better seen. I will test 12 hours. The results will be reported.
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 29, 2018, 09:02:12 PM |
|
Thank you for your fast work... Problem with pools disappear, great.. but after 3-4 hours of work, number of rejects from pool grow... and now it about 30-40% ()ested on v1.2.11) Can it be related to thread management? PS: Do you plan add cpu miners ? (sorry if you already answered, didn`t read whole thread. ) Please do try v1.2.12. There is no plan for CPU miners.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
January 29, 2018, 10:18:45 PM |
|
ok, I put a 7 rx580 rig with last version neoscrypt. Hope not to wake up tonight The speed is quite good, even if I have no idea of the setup of thread,intensity, gpu core and memory for that algo with your miner.... sticking with a mix of your value and the result of some some other algos...
|
|
|
|
UnclWish
|
|
January 29, 2018, 11:54:10 PM |
|
Reconnecting to server work not good... Often if GGS can't connect it tries to recoonnect, but can't. If press Stop-Start connection establishs.
And another one thing - if change on chart stat to another and back GGS will save config, but it's no changes.
|
|
|
|
OhMyHolyToken
Jr. Member
Offline
Activity: 98
Merit: 2
|
|
January 30, 2018, 01:37:02 AM |
|
Gateless Gate Sharp 1.2.12, CPU usage stay high:
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 30, 2018, 02:06:57 AM |
|
Reconnecting to server work not good... Often if GGS can't connect it tries to recoonnect, but can't. If press Stop-Start connection establishs.
And another one thing - if change on chart stat to another and back GGS will save config, but it's no changes.
Which coin were you mining at which pool? I need to reproduce your issue myself in order to fix it.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
softclickbr
Newbie
Offline
Activity: 20
Merit: 0
|
|
January 30, 2018, 04:39:50 AM |
|
I resolved the problem with dev fee in 1.2.7A version setting fixed diff in bsod.pw.
1.2.12 resolved the anoying windows dialog alerts during dev fee period.
Now, I saw the dev fee mode switching, nice and smooth (but at de minute 15, I believe have more 85 min without dev fee)
Congratulations.
Best regards, Vinicius
|
|
|
|
UnclWish
|
|
January 30, 2018, 05:29:25 AM |
|
Reconnecting to server work not good... Often if GGS can't connect it tries to recoonnect, but can't. If press Stop-Start connection establishs.
And another one thing - if change on chart stat to another and back GGS will save config, but it's no changes.
Which coin were you mining at which pool? I need to reproduce your issue myself in order to fix it. Cryptonight algo. Coin Intense. Pool pool.intense.hashvault.pro. Ports 80, 3333, 5555 and 7777.
|
|
|
|
Nick1488
Newbie
Offline
Activity: 7
Merit: 0
|
|
January 30, 2018, 06:10:14 AM |
|
Hello,
Can I ASK a question, how exactly do you duel mine ethereum Classic and a neoscrypt coin? What hashrate can you reach with a RX580 8GB?
|
|
|
|
|
rascabily
|
|
January 30, 2018, 06:52:48 AM Last edit: January 30, 2018, 07:17:07 AM by rascabily |
|
I will try and told him. edit http://prntscr.com/i7in7bwith version 1.2.8 it had 470 h / s
|
|
|
|
UnclWish
|
|
January 30, 2018, 07:48:19 AM Last edit: January 30, 2018, 08:31:04 AM by UnclWish |
|
Oh! VS 2017! Great! Thanks! P.S. zawawa, you wrote that issue with overclock enabled option on Pitcairns (BSOD or system hangs) is driver issue. But Claymore's miners can overclock Pitcairns without errors. They can't change vcore on them, but clocks are changes... P.P.S. It's strange, but VS 2017 during loading GGS project didn't see .Net Framework 4.7.1. Tried to launch 4.7.1. installation - writes that i allready have installed 4.7.1. Any suggestions?
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
January 30, 2018, 08:59:52 AM |
|
Can I see a screenshot of the Devices tab page? Did you try "Reset All?"
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
goofy73
Member
Offline
Activity: 65
Merit: 10
|
|
January 30, 2018, 09:30:53 AM |
|
The situation with gpu load looks like a little bit better in 1.2.13 version but it stil unstable, and i see a hashrate dance.. GGS settings is default. Guys can you check gpu load at neoscrypt algo?!
|
|
|
|
|