QuirkSilver
Member
Offline
Activity: 80
Merit: 13
|
|
February 14, 2018, 11:37:03 PM |
|
just tried running on 12*570 8GB - looks awesome! never seen such rates on cryptonight on polarises. there's something consistently wrong with two cards: and with slightly reduced volts: old GG and "slightly" xmr stak with two threads, 896 RI and 8 worksize for 4 GB The funny part is, even though they pull 1k, with FAR less energy than ethereum, whattomine and many other sources have them hilariously underrated at around 700 h/s each! the 4gb memory controller on rx 570/580 and the 2gb 560 (same memory codes , elpidas, hynix etc.) is insanely fast in xmr. Many people will be surprised that, rx 560, 2gb without even 6 pin can do 540 h/s with normal PBE tweaking! i even got core way lower and they still hash at 540 h/s! $$ and energy wise, thats nearly better than VEGA! use 1/2 the values to fill the memory of the 4gb ones (448 RI, 8 worksize, 2 threads) maybe xmr stak if you wanna experiment, but Old GG and new GG are ridiculosly fast out of the box on these cards) Zawawa we love you
|
|
|
|
|
|
|
|
The grue lurks in the darkest places of the earth. Its favorite diet is adventurers, but its insatiable appetite is tempered by its fear of light. No grue has ever been seen by the light of day, and few have survived its fearsome jaws to tell the tale.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
UnclWish
|
|
February 14, 2018, 11:45:18 PM |
|
just tried running on 12*570 8GB - looks awesome! never seen such rates on cryptonight on polarises. there's something consistently wrong with two cards: and with slightly reduced volts: old GG and "slightly" xmr stak with two threads, 896 RI and 8 worksize for 4 GB The funny part is, even though they pull 1k, with FAR less energy than ethereum, whattomine and many other sources have them hilariously underrated at around 700 h/s each! the 4gb memory controller on rx 570/580 and the 2gb 560 (same memory codes , elpidas, hynix etc.) is insanely fast in xmr. Many people will be surprised that, rx 560, 2gb without even 6 pin can do 540 h/s with normal PBE tweaking! i even got core way lower and they still hash at 540 h/s! $$ and energy wise, thats nearly better than VEGA! use 1/2 the values to fill the memory of the 4gb ones (448 RI, 8 worksize, 2 threads) maybe xmr stak if you wanna experiment, but Old GG and new GG are ridiculosly fast out of the box on these cards) Zawawa we love you Try 459-460 RI. On 270X 4Gb it gives best speed.
|
|
|
|
murgorx
Member
Offline
Activity: 443
Merit: 13
|
|
February 15, 2018, 07:33:43 AM Last edit: February 15, 2018, 07:58:48 AM by murgorx |
|
Guys, could anyone more experienced tell me what exactly is going on here? I've been running the GGS miner stable for some hours, without any problems in all graphs, using 5xRX580 nitro+ SE and the miner shows me 4400kh/s, the fluctuation is +-50kh/s. I just logged from work on my PC to check if everything is okay, and saw that the pool shows me 7kh/s, peak 10kh/s but most of the time it is over 5k+. I have created screenshots of all of my tweaks I've done to the cards in the miner. Can anyone explain why is there such a big difference between the miner and the pool and is there anything else I might do to increase my hashpower? I've seen the post above me, where the dude with the 570s is mining at 1000kh/s, which is a bit worse than mine. Under you will find the screenshots from the miner and the pool: https://imgur.com/a/yZdJX - dashboard miner https://imgur.com/a/rZTVS - devices miner - Threads : 2/ Raw Intensity - 128/ Local Work Size - 8. I know you can't see them, but I use tab to switch from box to box CTRL+A and afterwards CTRL+C and then I paste it somewhere to see the data. https://imgur.com/a/tJv9e - pool results. I'm fairly new to mining Cryptonight, I have read some articles, but not really sure what I should do in terms of mclock cclock speeds, intensity and threads etc. Btw the miner is bugged out since I installed it and I cannot see any values in the box PASCAL ITERATIONS. Thank you in advance guys! Biggest shout out to Zawawa! Hands down the best Cryptonight & Neoscrypt miner EVER! EDIT: If you want I can take a screenshot of the HWINFO page, I am simply not running it, because don't know why, but I think it running in the BG is causing some issues with the rig and that's why I am not using it, but in 99% of the cases cards are running at 0 errors.
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
February 15, 2018, 07:47:51 AM |
|
imgur.com/a/tJv9e - pool results
read the 4th line in your own picture
|
|
|
|
murgorx
Member
Offline
Activity: 443
Merit: 13
|
|
February 15, 2018, 08:02:06 AM |
|
imgur.com/a/tJv9e - pool results
read the 4th line in your own picture
I understand that the results my vary, but come on , I've been mining for 2hours and 30 minutes and it consistently shows 2000 kh/s above what I see in the miner. It's not for 5, but for 150 minutes mining.
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
February 15, 2018, 08:44:31 AM |
|
zawawa - any luck for VEGA cards, XMR? Thanks
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
hexagram
Member
Offline
Activity: 81
Merit: 10
nosce te ipsum
|
|
February 15, 2018, 11:51:11 AM Last edit: February 15, 2018, 03:03:22 PM by hexagram |
|
Gateless Gate Sharp is the first open-source dual ETH/XMR/PASC/LBC/FTC/MONA miner for Windows operating systems. It focuses on performance, stability, and ease of use. Unlike the original Gateless Gate, this miner aims at stability with a much simpler design and the managed .NET Framework. * https://github.com/zawawawa/GatelessGateSharp* https://github.com/zawawawa/GatelessGateSharp/releases/download/v1.2.18-stable/Gateless_Gate_Sharp_1.2.18_stable_Setup.msi (Windows x64 Installer) Currently, the miner supports Ethash/Pascal dual-mining, Ethash/daggerhashimoto, CryptoNight, Pascal, Lbry, NeoScrypt, LyraREv2, and the following major pools: NiceHash, ethermine.org, ethpool.org, DwarfPool, Nanopool, zpool, and mineXMR.com. Support for custom pools has also been added. All you have to do to mine is to download and run the installer, launch the miner, enter your wallet address(es), and click the Start button. The miner is yet to be fully optimized, however, and the first official release will be available when it is feature-complete. Please note that, even though this miner does work with NVIDIA cards, the current focus of the project is on AMD. Hello Yuri this is amazing!! I just found your miner today and I saw the year was 2016 and wasn't too enthusiastic, but when I checked your Github I found your latest version and you're actively developing it. Thank you sir!! I am running it on 10 RX 570 8GB Nitro+ and it's AMAZING!! Beautiful interface, great hash rate, you are brilliant!! And most of all thank you for making this free. Please let me know if there is anything I can do to support this project. I will most likely be emailing you soon too for some tips. Your new fan and supporter!
|
|
|
|
heavyarms1912
|
|
February 15, 2018, 03:09:15 PM |
|
Hello Yuri this is amazing!! I just found your miner today and I saw the year was 2016 and wasn't too enthusiastic, but when I checked your Github I found your latest version and you're actively developing it. Thank you sir!! I am running it on 10 RX 570 8GB Nitro+ and it's AMAZING!! Beautiful interface, great hash rate, you are brilliant!! And most of all thank you for making this free. Please let me know if there is anything I can do to support this project. I will most likely be emailing you soon too for some tips. Your new fan and supporter! FYI. About the DEVFEE This miner has a built-in 1% DEVFEE. I must emphasize that I absolutely need the DEVFEE in order to continue this project, and I will not provide any support for those who run binaries I did not sign. This project requires a full-time attention and testing is quite expensive. The DEVFEE is non-negotiable. If you don't like it, please go elsewhere
|
|
|
|
hexagram
Member
Offline
Activity: 81
Merit: 10
nosce te ipsum
|
|
February 15, 2018, 03:11:17 PM |
|
just tried running on 12*570 8GB - looks awesome! never seen such rates on cryptonight on polarises. there's something consistently wrong with two cards: and with slightly reduced volts: I have 8GB RX 570s too but I'm only getting ~980 with my Samsung ones and ~810 with my Hynix ones. What strap settings do you use? Could you share them here please :-)
|
|
|
|
hexagram
Member
Offline
Activity: 81
Merit: 10
nosce te ipsum
|
|
February 15, 2018, 03:12:28 PM |
|
Try 459-460 RI. On 270X 4Gb it gives best speed.
What's RI where do I set that?
|
|
|
|
murgorx
Member
Offline
Activity: 443
Merit: 13
|
|
February 15, 2018, 03:15:26 PM |
|
Try 459-460 RI. On 270X 4Gb it gives best speed.
What's RI where do I set that? Go to the Devices tab > choose the Cryptonight algorithm and you will see them. Check my post, that's up a bit, the 2nd imgur link .
|
|
|
|
hexagram
Member
Offline
Activity: 81
Merit: 10
nosce te ipsum
|
|
February 15, 2018, 03:26:39 PM |
|
Try 459-460 RI. On 270X 4Gb it gives best speed.
What's RI where do I set that? Go to the Devices tab > choose the Cryptonight algorithm and you will see them. Check my post, that's up a bit, the 2nd imgur link . Ah you mean Raw Intensity? I'm new to this software but anyway if I set that over 128 I get not enough memory error.
|
|
|
|
UnclWish
|
|
February 15, 2018, 03:51:15 PM |
|
Try 459-460 RI. On 270X 4Gb it gives best speed.
What's RI where do I set that? Go to the Devices tab > choose the Cryptonight algorithm and you will see them. Check my post, that's up a bit, the 2nd imgur link . Ah you mean Raw Intensity? I'm new to this software but anyway if I set that over 128 I get not enough memory error. Yes RI - Raw Intensity. For cryptonight algo (Threads =2, Worksize = 8 ): RI = 128 needs 4,3Gb VRAM. And 128 is for 480/580 8Gb cards. For 470/570/480/580 4Gb cards use RI = 112 For 270X 4Gb best is RI = 59-60.
|
|
|
|
Ursul0
|
|
February 15, 2018, 06:04:58 PM |
|
I have 8GB RX 570s too but I'm only getting ~980 with my Samsung ones and ~810 with my Hynix ones. What strap settings do you use? Could you share them here please :-)
mostly Samsung, except the two lagging behind - those are Hynix. All modded with straps from 1.6.4 PBE (there's a link few pages back) all Nitra+ 570 8GB
|
|
|
|
YakETy
Newbie
Offline
Activity: 18
Merit: 0
|
|
February 15, 2018, 07:25:43 PM |
|
Hi,
I just tried your software on 1 of my rigs and results seems really promising. But I have something very strange :
I use cryptonight algo (electroneum on nanopool) and out of my 6 cards only 3 are working : 2 RX580 and 1 RX470. The 3 other RX580 are just not starting.
It's strange as XMR-STACK and Claymore work really well on this RIG.
Any idea why ?
Thank you for your feedback.
Christophe
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
February 15, 2018, 11:11:01 PM |
|
if you mod the card, I don't know but
if you have changed just the timing strap for ethereum
just put 1200 850 and 2150 850
it will give you on cryptonight 900 speed minimu
from that , you have to tweak card by card in order to go higher but they start
SapphirePulse 8gb, Micron or Elpida Samsung memory
|
|
|
|
hexagram
Member
Offline
Activity: 81
Merit: 10
nosce te ipsum
|
|
February 16, 2018, 12:27:21 AM |
|
I have 8GB RX 570s too but I'm only getting ~980 with my Samsung ones and ~810 with my Hynix ones. What strap settings do you use? Could you share them here please :-)
mostly Samsung, except the two lagging behind - those are Hynix. All modded with straps from 1.6.4 PBE (there's a link few pages back) all Nitra+ 570 8GB I have 4 Hynix and those are lagging too. Trying to figure out how to bump them up on cryptonight. For ethash they are all the same. Will let you know if I find anything, also please let me know if you do. Cheers!
|
|
|
|
|
treanski
Full Member
Offline
Activity: 364
Merit: 106
ONe Social Network.
|
|
February 16, 2018, 02:29:27 PM |
|
I have 8GB RX 570s too but I'm only getting ~980 with my Samsung ones and ~810 with my Hynix ones. What strap settings do you use? Could you share them here please :-)
mostly Samsung, except the two lagging behind - those are Hynix. All modded with straps from 1.6.4 PBE (there's a link few pages back) all Nitra+ 570 8GB I have 4 Hynix and those are lagging too. Trying to figure out how to bump them up on cryptonight. For ethash they are all the same. Will let you know if I find anything, also please let me know if you do. Cheers! they do not lag, your memory timings sucks. hynix needs special timings to get speed close to samsung memory
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
February 17, 2018, 12:33:51 AM |
|
This reminds me of good old DOS days... I would just focus on the GUI and keep the command line version to the bare minimum, though.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
|