Gateless Gate Sharp 1.3.8: 30Mh/s (Ethash) on RX 480!

[Larvitar]

While I can understand that you don't want trouble supporting weird mod of cards, Branko and the other  guy trying to test GGS just reported a legit bug in the software:
if you select OPTIMIZE & select Criptonightv7  you get a thread  exeption: the given key isn't present in the dictionary.

And because I'm writing on bugs:
Fan: minimum is supposed to be 0 % and not 20 %
Fan2: if you modify it and click on copy to the same cards, ggs crash and restart

Custom pool: can't be selected for CNv7

Missing algos: CN7lite

Is memory strap optimization done dynamically, or handpicking from already premade straps?

Relevant question about straps, Branko. I think it tests the timings one by one, according the all-failed tests.

[1713591293]

1713591293

[1713591293]

1713591293

[1713591293]

1713591293

[1713591293]

1713591293

[zawawa]

The next version will support X16R/S and CryptoNight-Light as well as Raven, AEON and Sumokoin with default pools.
Stay tuned.

[UnclWish]

The next version will support X16R/S and CryptoNight-Light as well as Raven, AEON and Sumokoin with default pools.
Stay tuned.

What about best straps for hynix MJR memory?
Can you add parsing timings from strap in string?

[zawawa]

Zawawa, could you please advise what kind of intensity should I be using for Cryptonight-heavy algo? I have tried to mine it with the same settings, that I use for the normal cryptonight algorithm, but it seems they are too high for the heavy algo. I am not really experienced into these algorithms, since I am mainly mining ETH, but I would really like to try and see what my profits would be on the heavy one?

The next version will come with a separate tab page for CryptoNight-Heavy with more reasonable default values.

[zawawa]

The next version will support X16R/S and CryptoNight-Light as well as Raven, AEON and Sumokoin with default pools.
Stay tuned.

What about best straps for hynix MJR memory?
Can you add parsing timings from strap in string?

Will do.

[UnclWish]

The next version will support X16R/S and CryptoNight-Light as well as Raven, AEON and Sumokoin with default pools.
Stay tuned.

What about best straps for hynix MJR memory?
Can you add parsing timings from strap in string?

Will do.

Thanks! You're Great!
One question: phymem is needed for something at this moment? Hardware acceleration? What this?

[zawawa]

The next version will support X16R/S and CryptoNight-Light as well as Raven, AEON and Sumokoin with default pools.
Stay tuned.

What about best straps for hynix MJR memory?
Can you add parsing timings from strap in string?

Will do.

Thanks! You're Great!
One question: phymem is needed for something at this moment? Hardware acceleration? What this?

Not for the next version, though. You can google PhyMem if you want to know more about it.

[zawawa]

While I can understand that you don't want trouble supporting weird mod of cards, Branko and the other  guy trying to test GGS just reported a legit bug in the software:
if you select OPTIMIZE & select Criptonightv7  you get a thread  exeption: the given key isn't present in the dictionary.

And because I'm writing on bugs:
Fan: minimum is supposed to be 0 % and not 20 %
Fan2: if you modify it and click on copy to the same cards, ggs crash and restart

Custom pool: can't be selected for CNv7

Missing algos: CN7lite
 

There were some absolutely horrendous bugs indeed. Thanks for the report!

[skablast]

There is also a small problem with PhyMem.
When its activated will not stop even if I select so. More than that it doesn't stop even if I close GGS. Overdrive is unable to change whatever parameter Phymem activated in the AMD driver and Claymore ( ) can't even change the fan speed...
In fact, even a soft reboot doesn't work . Its necessary to shut down the PC and restart it.
But I'm not a pc expert so pick everything with a grain of salt
 

[UnclWish]

And don't forget to remove 10-12% CPU usage when GGS OC option activated.

[UAGet]

1.3.2 - cannot mine CryptoNight-Heavy
OS - Win10 64
See http://sendfile.su/1412453 SRBMiner - Ok.

[Elder III]

The next version will support X16R/S and CryptoNight-Light as well as Raven, AEON and Sumokoin with default pools.
Stay tuned.

If GG will be supporting X16r (Raven) algorithm, will it also support X16s (Pigeon) algorithm as well?  Currently the only version of SGminer to support X16s lags a fair bit behind the more optimized SGminer that only supports X16r when the average hashrate should be roughly the same between the two algorithms (at least as far as I understand them).

[zawawa]

The next version will support X16R/S and CryptoNight-Light as well as Raven, AEON and Sumokoin with default pools.
Stay tuned.

If GG will be supporting X16r (Raven) algorithm, will it also support X16s (Pigeon) algorithm as well?  Currently the only version of SGminer to support X16s lags a fair bit behind the more optimized SGminer that only supports X16r when the average hashrate should be roughly the same between the two algorithms (at least as far as I understand them).

I am testing support for X16S and Pigeoncoin right now.
If everything goes well, I will push the update later today.

[zawawa]

And don't forget to remove 10-12% CPU usage when GGS OC option activated.

That extra usage is for hardware acceleration.

[UnclWish]

And don't forget to remove 10-12% CPU usage when GGS OC option activated.

That extra usage is for hardware acceleration.

Can't understand. Simle overclock settings (clocks and voltages) needs nearly 1 core of 8 core CPU? Phymem and Hardware acceleration options disabled...
F.e. Claymore miner sets clocks, voltages, PL and fans with using CPU only at start of miner. During mining thats no need to use CPU power for that...

[Pete_X]

And don't forget to remove 10-12% CPU usage when GGS OC option activated.

That extra usage is for hardware acceleration.

Can't understand. Simle overclock settings (clocks and voltages) needs nearly 1 core of 8 core CPU? Phymem and Hardware acceleration options disabled...
F.e. Claymore miner sets clocks, voltages, PL and fans with using CPU only at start of miner. During mining thats no need to use CPU power for that...

You are comparing Apples and Oranges ... both miners use a diff approach to reach the goal. Just a hint ... Clay has no GUI at all, GGS has a GUI and a lot of stuff is going on without notice for you ...

Just my 5 cents on that ... 

[Turkish88]

GGS has a GUI

I am still waiting nogui version of GG, with supporting fan control and cn heavy )

[john1010]

in comparison with stak xmr miner what is more stable this Gateless Gate or the stak xmr miner, I just want to try the monero forked, lot of us suffered with this dominal effect of asic in the gpu mining, the price of electricity here in my country is double than other asian nation, that's why i chose to shutdown all my rigs and waiting to the market to recover..

[skablast]

That something I know as I'm paying .26 €/kwh : I am running a rig of 8 rx 580 mining monero. Speed is 907 h/s per card. Power at the wall is around 700w, including motherboard cpu etc. Card Bios mod
The graph that show the speed is like an ECG of a death guy: stable since 4 days
Xmr stak 64 with double thread, 1124 intensity, workspace 8  in the same undervolt condition is giving me 870 h/s per card

[murgorx]

That something I know as I'm paying .26 €/kwh : I am running a rig of 8 rx 580 mining monero. Speed is 907 h/s per card. Power at the wall is around 700w, including motherboard cpu etc. Card Bios mod
The graph that show the speed is like an ECG of a death guy: stable since 4 days
Xmr stak 64 with double thread, 1124 intensity, workspace 8  in the same undervolt condition is giving me 870 h/s per card

Do you have a specific BIOS mod for cryptonight? Could you please enlighten a bit how to make one for myself, or where I can find a stable mod? I have been searching here for a cryptonight/heavy BIOS mods, but unfortunately I was not able to find anything..