preda
|
|
May 08, 2018, 06:47:22 AM |
|
Here's another rig I have running Cryptonight-Heavy with GGS 1.3.7 alpha. This rig has 10x RX 570 8GB Nitro+ but somehow Windows 10 detects them as RX 580 after upgrading to Adrenaline 18.4.1 and my GGS settings: Those churning ~820 h/s are Samsung DDRs and the rest at ~750 h/s are Hynix I haven't toyed with the Memory Timings, kind of scared to fuck up my cards. Anyone can help me improve my hashrate please? Will be happy to give a tip (0.005 BTC) if someone can help me get them to ~900-1000+ with stability. give me your bios
|
|
|
|
|
|
|
|
|
Every time a block is mined, a certain amount of BTC (called the
subsidy) is created out of thin air and given to the miner. The
subsidy halves every four years and will reach 0 in about 130 years.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
UnclWish
|
|
May 08, 2018, 07:14:52 AM |
|
Here's another rig I have running Cryptonight-Heavy with GGS 1.3.7 alpha. This rig has 10x RX 570 8GB Nitro+ but somehow Windows 10 detects them as RX 580 after upgrading to Adrenaline 18.4.1 and my GGS settings: Those churning ~820 h/s are Samsung DDRs and the rest at ~750 h/s are Hynix I haven't toyed with the Memory Timings, kind of scared to fuck up my cards. Anyone can help me improve my hashrate please? Will be happy to give a tip (0.005 BTC) if someone can help me get them to ~900-1000+ with stability. Try other intensity. For heavy best is from 112 to 124. Also... You use original bioses? What memory vendor of your cards?
|
|
|
|
hexagram
Member
Offline
Activity: 81
Merit: 10
nosce te ipsum
|
|
May 08, 2018, 11:01:28 AM |
|
give me your bios
Samsung BIOS: Hynix BIOS:
|
|
|
|
UnclWish
|
|
May 08, 2018, 11:43:19 AM |
|
give me your bios
Samsung BIOS: Hynix BIOS: Bioses are allready modded. You must set right intensity. Read my previous post. Also you can try SRB Polaris Bios editor. In it doctor make it's own mods for bioses - so called "pumped" timings.
|
|
|
|
Pete_X
Jr. Member
Offline
Activity: 47
Merit: 1
|
|
May 08, 2018, 02:50:27 PM |
|
Here's another rig I have running Cryptonight-Heavy with GGS 1.3.7 alpha. This rig has 10x RX 570 8GB Nitro+ but somehow Windows 10 detects them as RX 580 after upgrading to Adrenaline 18.4.1 and my GGS settings: Those churning ~820 h/s are Samsung DDRs and the rest at ~750 h/s are Hynix I haven't toyed with the Memory Timings, kind of scared to fuck up my cards. Anyone can help me improve my hashrate please? Will be happy to give a tip (0.005 BTC) if someone can help me get them to ~900-1000+ with stability. So let's help and get these cards over 1000h/s on CN-Heavy : Depending on the driver you use: 18.3.4 2-124-8 and 1200-900-2150-900 Hynix (Voltages can be tweaked when max hash is found) 2-124-8 and 1200-900-2050-900 Samsung (Voltages can be tweaked when max hash is found) 18.4.1 2-118-8 and 1200-900-2150-900 Hynix (Voltages can be tweaked when max hash is found) 2-118-8 and 1200-900-2050-900 Samsung (Voltages can be tweaked when max hash is found) Start with Intensity around 110 and raise it step by step (best is only a single card to get the idea what they like). I let each card run 5min as a test - that sould give you an idea how the card likes the settings - as not all cards are eqaul. On 18.3.4 most cards top around 124, 18.4.1 differs a bit - there it is around 118+-. With 1225 on the cores you should reach/top 1100 on Samsung and get close to 1100 on Hynix. I know it's a bit tweaking needed - but the results pay back easy Check the straps you use on both of them, normaly everyone useds on Samsung the "1Click" one -> 1750 and up -> 777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3FBA354019 Hynix 1750 and up -> 999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16 There is still some room for tweaks, as the rams probably can do more then what i wrote - but needs testing ... Hope i could help and you get these GPUs over 1000h/s soon 18.3.4 -> https://imgur.com/a/aKu7ZRjCheers
|
|
|
|
hexagram
Member
Offline
Activity: 81
Merit: 10
nosce te ipsum
|
|
May 08, 2018, 03:04:26 PM |
|
Here's another rig I have running Cryptonight-Heavy with GGS 1.3.7 alpha. This rig has 10x RX 570 8GB Nitro+ but somehow Windows 10 detects them as RX 580 after upgrading to Adrenaline 18.4.1 and my GGS settings: Those churning ~820 h/s are Samsung DDRs and the rest at ~750 h/s are Hynix I haven't toyed with the Memory Timings, kind of scared to fuck up my cards. Anyone can help me improve my hashrate please? Will be happy to give a tip (0.005 BTC) if someone can help me get them to ~900-1000+ with stability. So let's help and get these cards over 1000h/s on CN-Heavy : Depending on the driver you use: 18.3.4 2-124-8 and 1200-900-2150-900 Hynix (Voltages can be tweaked when max hash is found) 2-124-8 and 1200-900-2050-900 Samsung (Voltages can be tweaked when max hash is found) 18.4.1 2-118-8 and 1200-900-2150-900 Hynix (Voltages can be tweaked when max hash is found) 2-118-8 and 1200-900-2050-900 Samsung (Voltages can be tweaked when max hash is found) Start with Intensity around 110 and raise it step by step (best is only a single card to get the idea what they like). I let each card run 5min as a test - that sould give you an idea how the card likes the settings - as not all cards are eqaul. On 18.3.4 most cards top around 124, 18.4.1 differs a bit - there it is around 118+-. With 1225 on the cores you should reach/top 1100 on Samsung and get close to 1100 on Hynix. I know it's a bit tweaking needed - but the results pay back easy Check the straps you use on both of them, normaly everyone useds on Samsung the "1Click" one -> 1750 and up -> 777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3FBA354019 Hynix 1750 and up -> 999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16 There is still some room for tweaks, as the rams probably can do more then what i wrote - but needs testing ... Hope i could help and you get these GPUs over 1000h/s soon 18.3.4 -> https://imgur.com/a/aKu7ZRjCheers Wow thanks Pete_X really appreciate this. I got my Samsungs up around 1015 h/s at 110 intensity with your settings. Still working on the Hynix but I'm hopeful I can get them there too now. Please DM me your BTC address!
|
|
|
|
Pete_X
Jr. Member
Offline
Activity: 47
Merit: 1
|
|
May 08, 2018, 03:19:44 PM |
|
Wow thanks Pete_X really appreciate this. I got my Samsungs up around 1015 h/s at 110 intensity with your settings. Still working on the Hynix but I'm hopeful I can get them there too now. Please DM me your BTC address! Just pick a card to play with and raise Intensity one by one. Normaly the Samsungs should be around 1000h/s at +-105 (18.4.1 that is). 1050+- should be around 115. All that with 1200Core and 2050Mem. Raise these two only after you found a stable Intensity that the cards like ... You'll note that you are close to the right intensity if you get a flat line with no fluctuations after 1-2min ... Hynix ... we'll get there. Samsung 1st DM send - Thanks !
|
|
|
|
Lio78
Newbie
Offline
Activity: 35
Merit: 0
|
|
May 08, 2018, 06:10:08 PM |
|
I try to change timing in a bios.bin but when I save polaris say hex error. I have RX580 aorus 8GB hynix
|
|
|
|
duyquang06
Newbie
Offline
Activity: 154
Merit: 0
|
|
May 08, 2018, 06:11:01 PM |
|
Here's another rig I have running Cryptonight-Heavy with GGS 1.3.7 alpha. This rig has 10x RX 570 8GB Nitro+ but somehow Windows 10 detects them as RX 580 after upgrading to Adrenaline 18.4.1 https://s17.postimg.cc/9cqupeb1r/GGS_570x10_HASH.pngand my GGS settings: https://s17.postimg.cc/6hdriornz/GGS_570x10_SETTINGS.pngThose churning ~820 h/s are Samsung DDRs and the rest at ~750 h/s are Hynix I haven't toyed with the Memory Timings, kind of scared to fuck up my cards. Anyone can help me improve my hashrate please? Will be happy to give a tip (0.005 BTC) if someone can help me get them to ~900-1000+ with stability. So let's help and get these cards over 1000h/s on CN-Heavy : Depending on the driver you use: 18.3.4 2-124-8 and 1200-900-2150-900 Hynix (Voltages can be tweaked when max hash is found) 2-124-8 and 1200-900-2050-900 Samsung (Voltages can be tweaked when max hash is found) 18.4.1 2-118-8 and 1200-900-2150-900 Hynix (Voltages can be tweaked when max hash is found) 2-118-8 and 1200-900-2050-900 Samsung (Voltages can be tweaked when max hash is found) Start with Intensity around 110 and raise it step by step (best is only a single card to get the idea what they like). I let each card run 5min as a test - that sould give you an idea how the card likes the settings - as not all cards are eqaul. On 18.3.4 most cards top around 124, 18.4.1 differs a bit - there it is around 118+-. With 1225 on the cores you should reach/top 1100 on Samsung and get close to 1100 on Hynix. I know it's a bit tweaking needed - but the results pay back easy Check the straps you use on both of them, normaly everyone useds on Samsung the "1Click" one -> 1750 and up -> 777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3FBA354019 Hynix 1750 and up -> 999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16 There is still some room for tweaks, as the rams probably can do more then what i wrote - but needs testing ... Hope i could help and you get these GPUs over 1000h/s soon 18.3.4 -> https://imgur.com/a/aKu7ZRjCheers Is there anything i can do with my powercolor 580 4gb card samsung .... Only react 710h/s-720h/s with modded bios and 1200/2050. I will try bit higher mhz but i don;t think that improve too much. Thank you and have a good day : D
|
|
|
|
skablast
Member
Offline
Activity: 476
Merit: 19
|
|
May 08, 2018, 06:26:44 PM |
|
If you are referring to CN heavy, I can say that your speed are good but not great most because those are 4gb card. in my little experience ONLY 8gb card go over 1000 easily.
Different story if you are speaking of normal v7 algo.
Why don't take one out of the rig, put in a pc with a watchdog and run optimize with ggs ?
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
May 08, 2018, 06:36:57 PM |
|
Today's Schedule- Run the code optimizer on X16R.
- Optimize default settings for Sapphire Nitro+ RX 570/580.
- Enable memory timing mods for RX 550/560.
My wife wants me to clean the living room, but who cares!
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
UnclWish
|
|
May 08, 2018, 06:38:36 PM |
|
Here's another rig I have running Cryptonight-Heavy with GGS 1.3.7 alpha. This rig has 10x RX 570 8GB Nitro+ but somehow Windows 10 detects them as RX 580 after upgrading to Adrenaline 18.4.1 and my GGS settings: Those churning ~820 h/s are Samsung DDRs and the rest at ~750 h/s are Hynix I haven't toyed with the Memory Timings, kind of scared to fuck up my cards. Anyone can help me improve my hashrate please? Will be happy to give a tip (0.005 BTC) if someone can help me get them to ~900-1000+ with stability. So let's help and get these cards over 1000h/s on CN-Heavy : Depending on the driver you use: 18.3.4 2-124-8 and 1200-900-2150-900 Hynix (Voltages can be tweaked when max hash is found) 2-124-8 and 1200-900-2050-900 Samsung (Voltages can be tweaked when max hash is found) 18.4.1 2-118-8 and 1200-900-2150-900 Hynix (Voltages can be tweaked when max hash is found) 2-118-8 and 1200-900-2050-900 Samsung (Voltages can be tweaked when max hash is found) Start with Intensity around 110 and raise it step by step (best is only a single card to get the idea what they like). I let each card run 5min as a test - that sould give you an idea how the card likes the settings - as not all cards are eqaul. On 18.3.4 most cards top around 124, 18.4.1 differs a bit - there it is around 118+-. With 1225 on the cores you should reach/top 1100 on Samsung and get close to 1100 on Hynix. I know it's a bit tweaking needed - but the results pay back easy Check the straps you use on both of them, normaly everyone useds on Samsung the "1Click" one -> 1750 and up -> 777000000000000022CC1C00AD615C41C0590E152ECC8608006007000B031420FA8900A00300000 010122F3FBA354019 Hynix 1750 and up -> 999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16 There is still some room for tweaks, as the rams probably can do more then what i wrote - but needs testing ... Hope i could help and you get these GPUs over 1000h/s soon 18.3.4 -> https://imgur.com/a/aKu7ZRjCheers Wow thanks Pete_X really appreciate this. I got my Samsungs up around 1015 h/s at 110 intensity with your settings. Still working on the Hynix but I'm hopeful I can get them there too now. Please DM me your BTC address! Thanks for ignoring me. My posts to find right intensity from 112 to 124 you just ignored. Anyway you must know that cards with different manufacters even with the same type of memory must not work on the same timings on the same clocks. For example, Saphire Nitro+ with hynix mjr will good work on 2150MHz memory clock on timings 999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16 but MSI Gaming X with the same hynix mjr on these timings didn't work even on 2100MHz. On clocks lower 2100MHz it will give speed lower than with other timings. But if I look you allready got all what you want. Hope that all your hynix mjr cards are fine quality...
|
|
|
|
UnclWish
|
|
May 08, 2018, 06:40:09 PM |
|
Today's Schedule- Run the code optimizer on X16R.
- Optimize default settings for Sapphire Nitro+ RX 570/580.
- Enable memory timing mods for RX 550/560.
My wife wants me to clean the living room, but who cares! You better listen to her ))))
|
|
|
|
Littlegrand
Jr. Member
Offline
Activity: 104
Merit: 5
|
|
May 08, 2018, 07:31:53 PM |
|
Today's Schedule- Run the code optimizer on X16R.
- Optimize default settings for Sapphire Nitro+ RX 570/580.
- Enable memory timing mods for RX 550/560.
My wife wants me to clean the living room, but who cares! Fix CNHeavy "switching to monero version 2 issue" and ill talk to your wife;)
|
|
|
|
hexagram
Member
Offline
Activity: 81
Merit: 10
nosce te ipsum
|
|
May 09, 2018, 03:46:15 AM |
|
Thanks for ignoring me. My posts to find right intensity from 112 to 124 you just ignored. Anyway you must know that cards with different manufacters even with the same type of memory must not work on the same timings on the same clocks. For example, Saphire Nitro+ with hynix mjr will good work on 2150MHz memory clock on timings 999000000000000022339D00CEDD6B4470551414B80D960B0040C400750314204A8900A00200000 018123745B92B3A16
but MSI Gaming X with the same hynix mjr on these timings didn't work even on 2100MHz. On clocks lower 2100MHz it will give speed lower than with other timings.
But if I look you allready got all what you want. Hope that all your hynix mjr cards are fine quality...
Uhh you're welcome?! Actually I didn't ignore you, I simply missed your message but I've already tried different intensities and nothing above 80 worked for my Sapphire RX 570 8GB Nitro+ before I increased my voltage as Pete_X suggested. I still have a couple of problems, one of which I found a solution already. I will post so others can make use of it: 1. Windows 10 and Adrenalin 18.4.1 detected my RX 570's as RX 580's. Apparently downgrading Adrenaline to 18.3.4 fixed this. 2.With Pete_X's suggestions, I was able to get my Samsungs around 1000 h/s and my Hynixes around 900 h/s but when I put them together GGS would throttle and I would run out of memory. Any thoughts on this zawawa or anyone?
|
|
|
|
Pete_X
Jr. Member
Offline
Activity: 47
Merit: 1
|
|
May 09, 2018, 10:02:48 AM |
|
[...] 1. Windows 10 and Adrenalin 18.4.1 detected my RX 570's as RX 580's. Apparently downgrading Adrenaline to 18.3.4 fixed this.
2.With Pete_X's suggestions, I was able to get my Samsungs around 1000 h/s and my Hynixes around 900 h/s but when I put them together GGS would throttle and I would run out of memory. Any thoughts on this zawawa or anyone?
1. 18.4.1. is just one thing -> bugged ... better stay away from it 2. That is normally i sign for a: wrong intensity or b: a gpu crashed - or both. You should see on the graph or at the speed if it wortks - or not. Second Thread starts with a dely - so don't get fooled by some cards - it can take up to 2 Min or so till the 2nd thread is running at full speed ... Graphs tell also a lot ... flatline, up'n down etc ... Best to test it out is to enable just one card. Voltages in the safe zone and intensity conservative at a lower start. Card by card and notes taken should lead to success .... Not to forget - the swap file - it can't be big enough. For my rigs i simply use a old HDD (1TB) and W10 got a 156GB swap file on that drive PS: Got my hands on an old 570 Pulse 8GB with Hynix MJR - right now running 2-122-8 1200-950-2100-950 @1025h/s
|
|
|
|
UnclWish
|
|
May 09, 2018, 02:29:50 PM |
|
[...] 1. Windows 10 and Adrenalin 18.4.1 detected my RX 570's as RX 580's. Apparently downgrading Adrenaline to 18.3.4 fixed this.
2.With Pete_X's suggestions, I was able to get my Samsungs around 1000 h/s and my Hynixes around 900 h/s but when I put them together GGS would throttle and I would run out of memory. Any thoughts on this zawawa or anyone?
1. 18.4.1. is just one thing -> bugged ... better stay away from it 2. That is normally i sign for a: wrong intensity or b: a gpu crashed - or both. You should see on the graph or at the speed if it wortks - or not. Second Thread starts with a dely - so don't get fooled by some cards - it can take up to 2 Min or so till the 2nd thread is running at full speed ... Graphs tell also a lot ... flatline, up'n down etc ... Best to test it out is to enable just one card. Voltages in the safe zone and intensity conservative at a lower start. Card by card and notes taken should lead to success .... Not to forget - the swap file - it can't be big enough. For my rigs i simply use a old HDD (1TB) and W10 got a 156GB swap file on that drive PS: Got my hands on an old 570 Pulse 8GB with Hynix MJR - right now running 2-122-8 1200-950-2100-950 @1025h/s Don't forget to point algo on wich you have 1025 h/s. Heavy algo on 8Gb cards give about 50-75 h/s more than normal cryptonight v7.
|
|
|
|
Littlegrand
Jr. Member
Offline
Activity: 104
Merit: 5
|
|
May 09, 2018, 10:46:36 PM |
|
I think I know the solution. The server is supposed to signal the V7 algorithm, but apparently it doesn't, so all I have to do is to add "CryptoNight-HeavyV7" as a new algorithm, just like "CryptoNightV7". I didn't want to clutter the user interface, but apparently there is no way around it. I will make sure to fix the issue for the next version. Quote from: Littlegrand on May 05, 2018, 03:40:39 PM
Quote
Quote from: Littlegrand on Today at 08:51:51 AM Quote It is all right. The log shows cryptonight heave loaded, the share submitted to the correct url, just rejected wrong algo... Correct url didn't means that you select correct url for cryptonight heavy algo. Most pools have several ports for different algos. If you chose port for cryptonightv7 but in miner you select CN heavy algo, miner will connect to pool via seleted port, and pool allows to connect, but miner will finds shares for heavy and send them on pool to port from wich pool wait shares for cryptonightV7, due to port. Check port number for your pool. Is you right pointed it for CN heavy.
Yes it is correct port(though it does not show port in log). The Haven address in log is correct as well.
It normal to say Switching to Monero 2 in log?
Any ideas?
Thanks
Please give me information about your pool, the coin you are mining, and your settings, and I will get to it right away
Haven
haven.ingest.cryptoknight.cc 5531
Didnt optimize default settings: Threads 1 Intensity 4 tried to 20 Work size 4 Strided index 1 Memory chunk 2
My laptop has NVIDIA geforce 740m.
Also tried it same settings on my 6 card AMD rig with 3 RX580 and 3 RX570, same thing
Log from laptop(same on rig)
2018-05-05 12:34:10.7939 [16] Running garbage collection... 2018-05-05 12:34:10.7939 [16] Memory used before collection: 14MB 2018-05-05 12:34:10.8900 [16] Memory used before collection: 12MB 2018-05-05 12:34:13.1940 [18] API Listener started. 2018-05-05 12:38:33.9272 [1] Launching miner(s) for Custom Pool 0... 2018-05-05 12:38:35.5019 [20] Miner thread for Device #0 started. 2018-05-05 12:38:35.5019 [20] NiceHash mode is off. 2018-05-05 12:38:35.6611 [20] Loaded Kernels\cryptonight_heavy.cl for Device #0. 2018-05-05 12:38:47.1088 [20] Built cryptonight_heavy program for Device #0. 2018-05-05 12:38:47.1088 [20] Build options: -DSTRIDED_INDEX=1 -DMEMORY_CHUNK_SIZE=2 -IKernels -DWORKSIZE=4 2018-05-05 12:38:47.1695 [20] Switching to Monero Version 2 2018-05-05 12:38:57.8436 [20] Device #0 (CryptoNight): 30.11 h/s 2018-05-05 12:39:08.4715 [20] Device #0 (CryptoNight): 30.12 h/s 2018-05-05 12:39:08.8778 [12] Received new job: 800226972178483 2018-05-05 12:39:10.8926 [16] Running garbage collection... 2018-05-05 12:39:10.8926 [16] Memory used before collection: 16MB 2018-05-05 12:39:10.9617 [16] Memory used before collection: 15MB 2018-05-05 12:39:19.1095 [20] Device #0 submitted Share #0 to haven.ingest.cryptoknight.cc as (my have address taken out) 2018-05-05 12:39:19.1100 [20] Device #0 submitted a share to haven.ingest.cryptoknight.cc as (my have address taken out) 2018-05-05 12:39:19.1100 [20] Device #0 (CryptoNight): 29.92 h/s 2018-05-05 12:39:19.7139 [12] Share #0 rejected: Wrong algo, use monero7 miner 2018-05-05 12:39:28.4014 [1] Stopping miners... 2018-05-05 12:39:28.4819 [1] Stopped miners.
Thanks, --James
"2018-05-05 12:38:47.1695 [20] Switching to Monero Version 2" Why is this crappy server not returning 7? Does this mean I have to add "CryptoNight-HeavyV7"? What a mess... Any luck on this? Gonna clone your project in VS tonight see if I can help out I have no experience in miners and the project is large sooooo;) Just a quick look on Github it appears that CNHeavy is broken into 3 and above and below 3, so I'm guessing this server should be returning 3 or higher so returning 2 is causing the wrong algo? Course could be way off:) Oh and I tried Loki on the same pool, same result, its CNHeavy as well. Stellite on a different pool however works fine(I know CN7 however haven't had time to try a diff Haven pool). zawawa You don't have to create a CryptoNight-HeavyV7. i have the project in VS now and working fine(hacked at the moment for testing but easy fix). I checked the XMR Stak code yours looked based off of and it is a simple fix. CN-Heavy running on on custom pool of haven.ingest.cryptoknight.cc and shares being accepted now. --J
|
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
May 10, 2018, 06:06:47 AM |
|
Oh, good! I will definitely take a look. I am still trying to get the optimizer to work with other algos. I definitely need to take a break from this matrix...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
zawawa (OP)
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
May 10, 2018, 01:02:55 PM Last edit: May 10, 2018, 01:17:27 PM by zawawa |
|
So I was testing GGS on RX 560, and the results were, well, less than desirable. No wonder GGS is not making as much money as I would like... I will spend the whole day tuning default settings for various cards, so we will see.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
|