▂▃▅▆▇⫷[ 🆉🅿🅾🅾🅻.🅲🅰 ]⫸⫷[!10 FLUX PA's!]⫸⫷[ the miners multipool ]⫸ ▇▆▅▃▂

[Windozxpert]

Can any one explain this jump please...


http://i66.tinypic.com/2cyfo05.jpg

Looks like a bunch of your coins were exchanged at the same time. The green in the graph are the coins that have been cleared and exchanged already. The blue line indicates the coins that haven't been cleared or exchanged.

[1713539521]

1713539521

[1713539521]

1713539521

[1713539521]

1713539521

[1713539521]

1713539521

[Windozxpert]

3 weeks do not withdraw coins FLAX.
For a long time this will continue, what is the reason?

Same reason as every other coin that's been over mined. Read the main page and you shall be enlightened.

And how long to wait?

Hard to say. Depends how many other people don't pay attention and also mine up a deficit. Also depends if its not profitable to mine. Neither of which I have control over.

Mining on Zpool from some weeks. I think is a good pool (hoping new server is  fixed right now), but documentation really leaks.. i spent a couple of days to understand some more advanced configurations to get the best the pool can get. Experimenting  with auto profit batch file.... I'm not a developer, just a noob, but infos are very poor.
i have some question to pose @ Crackfoo. I posed some question earlier.. sometime difficult to get reply... Maybe my question are "too noob" by the way i think is not bad to get new miners @ pool.
I found difficulties normalizing my gpu in the script (the reference is for cpu mining). i have to run an algo and then set the medium of the hashrate i got in the appropriate field?
Should i do the same with amg gpu replacing ccminer with sgminer in the script? should i found some profitable algos too?
Possible to configure to mine just "hash tap"...
I was mining skunk algo... i saw you add another skunk based coin...
now my miners are mining magnatum instead of signatum. in my scrypt c=SIGT.. is like this because pool makes me mining the most profitable coin?
 

I suggest you use Nemosminer or something of the sort. This program has greatly increased my earnings. It takes some configuration tweaks to get it to work smoothly on all algos, but it still works nicely. Are you AMD or Nvidia? Nemos utilizes NVidia.

Oh, and thanks for adding Magnatum to the pool, Crackfoo.

[papampi]

Can any one explain this jump please...


http://i66.tinypic.com/2cyfo05.jpg

Looks like a bunch of your coins were exchanged at the same time. The green in the graph are the coins that have been cleared and exchanged already. The blue line indicates the coins that haven't been cleared or exchanged.

I started mining at around mark 4h, and had 0 pending and balance, then between mark 10h and 12h, it suddenly gave me 0.002 bitcoins... not that I dont like it
Just want to know how come.

[cryptolelefla]

3 weeks do not withdraw coins FLAX.
For a long time this will continue, what is the reason?

Same reason as every other coin that's been over mined. Read the main page and you shall be enlightened.

And how long to wait?

Hard to say. Depends how many other people don't pay attention and also mine up a deficit. Also depends if its not profitable to mine. Neither of which I have control over.

Mining on Zpool from some weeks. I think is a good pool (hoping new server is  fixed right now), but documentation really leaks.. i spent a couple of days to understand some more advanced configurations to get the best the pool can get. Experimenting  with auto profit batch file.... I'm not a developer, just a noob, but infos are very poor.
i have some question to pose @ Crackfoo. I posed some question earlier.. sometime difficult to get reply... Maybe my question are "too noob" by the way i think is not bad to get new miners @ pool.
I found difficulties normalizing my gpu in the script (the reference is for cpu mining). i have to run an algo and then set the medium of the hashrate i got in the appropriate field?
Should i do the same with amg gpu replacing ccminer with sgminer in the script? should i found some profitable algos too?
Possible to configure to mine just "hash tap"...
I was mining skunk algo... i saw you add another skunk based coin...
now my miners are mining magnatum instead of signatum. in my scrypt c=SIGT.. is like this because pool makes me mining the most profitable coin?
 

I suggest you use Nemosminer or something of the sort. This program has greatly increased my earnings. It takes some configuration tweaks to get it to work smoothly on all algos, but it still works nicely. Are you AMD or Nvidia? Nemos utilizes NVidia.

Oh, and thanks for adding Magnatum to the pool, Crackfoo.

i have principally amd

[Windozxpert]

Can any one explain this jump please...


http://i66.tinypic.com/2cyfo05.jpg

Looks like a bunch of your coins were exchanged at the same time. The green in the graph are the coins that have been cleared and exchanged already. The blue line indicates the coins that haven't been cleared or exchanged.

I started mining at around mark 4h, and had 0 pending and balance, then between mark 10h and 12h, it suddenly gave me 0.002 bitcoins... not that I dont like it
Just want to know how come.

Must have found a block or the graphs' counters were reset. It happens all the time.

[Windozxpert]

3 weeks do not withdraw coins FLAX.
For a long time this will continue, what is the reason?

Same reason as every other coin that's been over mined. Read the main page and you shall be enlightened.

And how long to wait?

Hard to say. Depends how many other people don't pay attention and also mine up a deficit. Also depends if its not profitable to mine. Neither of which I have control over.

Mining on Zpool from some weeks. I think is a good pool (hoping new server is  fixed right now), but documentation really leaks.. i spent a couple of days to understand some more advanced configurations to get the best the pool can get. Experimenting  with auto profit batch file.... I'm not a developer, just a noob, but infos are very poor.
i have some question to pose @ Crackfoo. I posed some question earlier.. sometime difficult to get reply... Maybe my question are "too noob" by the way i think is not bad to get new miners @ pool.
I found difficulties normalizing my gpu in the script (the reference is for cpu mining). i have to run an algo and then set the medium of the hashrate i got in the appropriate field?
Should i do the same with amg gpu replacing ccminer with sgminer in the script? should i found some profitable algos too?
Possible to configure to mine just "hash tap"...
I was mining skunk algo... i saw you add another skunk based coin...
now my miners are mining magnatum instead of signatum. in my scrypt c=SIGT.. is like this because pool makes me mining the most profitable coin?
 

I suggest you use Nemosminer or something of the sort. This program has greatly increased my earnings. It takes some configuration tweaks to get it to work smoothly on all algos, but it still works nicely. Are you AMD or Nvidia? Nemos utilizes NVidia.

Oh, and thanks for adding Magnatum to the pool, Crackfoo.

i have principally amd

Unfortunately, I don't know much about AMD softwares.. I only have GTX 1080s and 1080tis

Look at this thread.. https://bitcointalk.org/index.php?board=160.0

There will be answers there.

[vgive]

How to fix problem...
2 day ago ccminer just connect Active
but Now ....

Cannet connect  ...retry after 30 seconds

pls. tell me can fix it?

[papampi]

Why Zcash is greyed out in equihash pool list ?

[papampi]

I'm new to zpool so please bear with me ...

Can any one explain to me the profit* and the 24 Hours Actual* in pool page?
For example in equihash pool page :

I see now that zencash profit shows 1.10568 so if my hash rate is 6 kS/s my daily profit should be around 1.10568*6/1000=0.006634 BTC correct?
Then 24 hours actual for equihash shows 0.11067 with same calculation it will be 0.11067*6/1000=0.00066402 BTC
Thats 10% of zen profit ..
So if I do zen mining on a mining pool like suprnova it should give me around 0.0066 BTC daily
but doing equihash algo mining on zpool gives me 0.0006 BTC ?

whats the profit in that ?
Where should I check for mining profit before start?
is my calculation wrong ?

[skdsw]

Can someone please setting it for me ?

-p c=BTC

else zpool could pick a random payout currency for you.
When I was starting I had such issue and got BCH.

If you had mistaken, it's impossible to convert already mined coins to BTC or any other.
Need to start over.

Good luck!

That's right, it can be random and not always the correct guess. There have been and are too many coins on the pool using the same address type as bitcoin which is why I've noted you must supply the c=BTC    or whatever currency your wallet is or it can be hit and miss and even that sometimes isn't always 100%. Please always check your wallet stats to make sure the currency shown is what you want to be paid in. If it's not, and you did use c=, I would try another address to get it detected to the proper currency.

<WALLET_ADDRESS> must be a valid BTC address. Incorrect addresses will result in forfit of earning.
You can also use any valid wallet address from any of the coins we mine. This feature has had minimal testing so use at your own risk
YOU MUST ALWAYS set your currency in your password field: c=<SYMBOL>. The pool has mined hundreds of different coins and many have the same address version. We CAN NOT read your mind and possible know what currency you want. If no c=<SYMBOL> is set, your currency will be randomly chosen from any matching coins we have used. This HAS TO BE A REAL EXCHANGE SYMBOL

I am very sorry, but where are you ask to supply c=BTC?
I understand this that I should specify BTC address in wallet address and c=coin I am mining
Could you please refund me BTX that you send to my BTC address?

[crackfoo]

Can someone please setting it for me ?

-p c=BTC

else zpool could pick a random payout currency for you.
When I was starting I had such issue and got BCH.

If you had mistaken, it's impossible to convert already mined coins to BTC or any other.
Need to start over.

Good luck!

That's right, it can be random and not always the correct guess. There have been and are too many coins on the pool using the same address type as bitcoin which is why I've noted you must supply the c=BTC    or whatever currency your wallet is or it can be hit and miss and even that sometimes isn't always 100%. Please always check your wallet stats to make sure the currency shown is what you want to be paid in. If it's not, and you did use c=, I would try another address to get it detected to the proper currency.

<WALLET_ADDRESS> must be a valid BTC address. Incorrect addresses will result in forfit of earning.
You can also use any valid wallet address from any of the coins we mine. This feature has had minimal testing so use at your own risk
YOU MUST ALWAYS set your currency in your password field: c=<SYMBOL>. The pool has mined hundreds of different coins and many have the same address version. We CAN NOT read your mind and possible know what currency you want. If no c=<SYMBOL> is set, your currency will be randomly chosen from any matching coins we have used. This HAS TO BE A REAL EXCHANGE SYMBOL

I am very sorry, but where are you ask to supply c=BTC?
I understand this that I should specify BTC address in wallet address and c=coin I am mining
Could you please refund me BTX that you send to my BTC address?

No, the c= has to match what currency you have set as your username.

Sorry, coins sent arn't refundable. Import your private key for your BTC address into BCH wallet and retrieve your coins.

[JACKSEG]

Hello,

I use Awesome Miner and I still don't understand how to optimize the change time for automatic profit.
For example, with zpool.ca, it's better to switch every 5 minutes, every 10 minutes or every 30 minutes ?
If we stay a little on an algo, we have no time to have blocks no ?

Thanks.

[skdsw]

No, the c= has to match what currency you have set as your username.

Sorry, coins sent arn't refundable. Import your private key for your BTC address into BCH wallet and retrieve your coins.

That was not BCH that was BTX

[crackfoo]

Hello,

I use Awesome Miner and I still don't understand how to optimize the change time for automatic profit.
For example, with zpool.ca, it's better to switch every 5 minutes, every 10 minutes or every 30 minutes ?
If we stay a little on an algo, we have no time to have blocks no ?

Thanks.

I would likely go with a midrange timer, 15m

[crackfoo]

an incident just occurred with one of the pools coin boxes so there are a bunch of coins offline. The provider has acted automatically and are currently investigating and working on the server. Unsure what the cause is yet.

Thanks

[papampi]

an incident just occurred with one of the pools coin boxes so there are a bunch of coins offline. The provider has acted automatically and are currently investigating and working on the server. Unsure what the cause is yet.

Thanks

Thanks for the fast headsup
was pulling my hairs why I can not connect zpool equihash server.

[crackfoo]

an incident just occurred with one of the pools coin boxes so there are a bunch of coins offline. The provider has acted automatically and are currently investigating and working on the server. Unsure what the cause is yet.

Thanks

Thanks for the fast headsup
was pulling my hairs why I can not connect zpool equihash server.

yes thats why. guess I'll split those coins on different servers once it's back.

The technicians logged the issue as no OS found when they viewed the console. Hardware tests are running now. I'm guessing a reboot again will probably fix it but waiting for hardware tests to complete.

[skdsw]

You removed from pool X17 algo
Is it forever?

[crackfoo]

You removed from pool X17 algo
Is it forever?

No, just the wallet is offline. See the post above this one.

[Zakharov_And]

Algorithm Scrypt offline...?
Restart?