Super Z
Newbie
 Offline
Activity: 14
Merit: 0
|
 |
June 09, 2017, 10:06:10 PM
Last edit: June 09, 2017, 11:05:28 PM by Super Z |
|
Ethereum yes, temp at most 77 for a peak otherwise it keeps around 64-68C with max fan speed at 51% when it hits over 72C for those few short times. At the moment only Crimson but with Afterburn it is the same.
Currently not even undervolting but keeps a bit cooler it I does.
Have you modified the bios? if Yes please mention the details as currently my card has stock bios and what is your room temp, my room temp is around 25c to 30c night and in night it is hitting 83c mostly and i am using afterburner with it. |
|
|
|
|
|
|
|
|
|
|
|
Even if you use Bitcoin through Tor, the way transactions are handled by the network makes anonymity difficult to achieve. Do not expect your transactions to be anonymous unless you really know what you're doing.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
Mattthev
|
|
June 10, 2017, 06:25:54 AM |
|
Have you modified the bios? if Yes please mention the details as currently my card has stock bios and what is your room temp, my room temp is around 25c to 30c night and in night it is hitting 83c mostly and i am using afterburner with it.
Undervolting and underclocking will help you with temps, but without additional fans it will be still pretty bad. |
|
|
|
|
Mattthev
|
|
June 12, 2017, 05:48:48 PM |
|
Hey, I need some knowledge help here!
I've got two ASUS RX 480 strix 8gb, samsung memory, cards and every time I copy 1750 strap to 2000 and flashi it, GPU-z loses its function to read info. No clocks, temps, no nothing. Unable to set clocks in wattool or afterburner. Where is the catch ?
What is uber-mix ? where do i copy it, to 2000 stap?
Read my guide! You need apply patch. |
|
|
|
|
Mattthev
|
|
June 15, 2017, 08:58:19 PM |
|
Yeah, no. No need for that patch. The point was to find correct driver that allows bios edit. After bios flash reinstall driver and voila, everything works, 29.3mhs @ stock clocks with uber-mix timings.
Oh, ok, what drivers you had and installed after? |
|
|
|
Justwondering
Newbie
Offline
Activity: 50
Merit: 0
|
|
June 28, 2017, 11:15:17 PM |
|
Yeah, no. No need for that patch. The point was to find correct driver that allows bios edit. After bios flash reinstall driver and voila, everything works, 29.3mhs @ stock clocks with uber-mix timings.
Oh, ok, what drivers you had and installed after? I've got 2 Asus strix rx480 with the pretty terrible 24mh/s speeds, I've read through the 4 pages, but kind of can't follow exactly what to do, any chance of a step by step guide please? I also spotted this rx480 to rx 580 bios for the Asus strix, I am kind of thinking it might improve mining but it's not going to be optimised for mining http://www.overclock.net/t/1604567/polaris-bios-editing-rx5xx-rx4xx/3870#post_26191964Just spotted your really great guide! And YouTube videos! Just kind of need to know, which is the best driver software version of the rx480 from amd for best use with modding and modded Asus strix rx 480 bios and mining? |
|
|
|
|
TicTacKiller
Newbie
Offline
Activity: 20
Merit: 0
|
|
July 02, 2017, 02:56:08 AM |
|
I tried to start my own thread and no one really seemed to want to help..
but maybe on here you guys can offer some help.
I have the 480 strix 8G with Samsung memory.
I've tried the ubermix 3.1 but my hashes actually went down with it. I get the best when I just copy 1750 to 2000. But I have to have my core at 1410 mem at 2100 and target power +50% (with asus tweak) to get 28 mhs on ethereum. Gpuz says 200w for just the rx 480..
I've been playing with my settings for days now and this is the only way I can get 28 and I know I shouldn't be pulling that much power.
|
|
|
|
|
Justwondering
Newbie
Offline
Activity: 50
Merit: 0
|
|
July 02, 2017, 03:17:54 AM |
|
I tried to start my own thread and no one really seemed to want to help..
but maybe on here you guys can offer some help.
I have the 480 strix 8G with Samsung memory.
I've tried the ubermix 3.1 but my hashes actually went down with it. I get the best when I just copy 1750 to 2000. But I have to have my core at 1410 mem at 2100 and target power +50% (with asus tweak) to get 28 mhs on ethereum. Gpuz says 200w for just the rx 480..
I've been playing with my settings for days now and this is the only way I can get 28 and I know I shouldn't be pulling that much power.
I have not yet managed to my bios yet, but I do have the same card has you, just using afterburner at the moment. Settings, +0 (zero) target power 1133 core 2250 memory I get 27.5 mhs I think the core is too high and the target power. |
|
|
|
|
TicTacKiller
Newbie
Offline
Activity: 20
Merit: 0
|
|
July 02, 2017, 03:58:23 AM |
|
I tried to start my own thread and no one really seemed to want to help..
but maybe on here you guys can offer some help.
I have the 480 strix 8G with Samsung memory.
I've tried the ubermix 3.1 but my hashes actually went down with it. I get the best when I just copy 1750 to 2000. But I have to have my core at 1410 mem at 2100 and target power +50% (with asus tweak) to get 28 mhs on ethereum. Gpuz says 200w for just the rx 480..
I've been playing with my settings for days now and this is the only way I can get 28 and I know I shouldn't be pulling that much power.
I have not yet managed to my bios yet, but I do have the same card has you, just using afterburner at the moment. Settings, +0 (zero) target power 1133 core 2250 memory I get 27.5 mhs I think the core is too high and the target power. With those settings I get 4 mhs |
|
|
|
|
Justwondering
Newbie
Offline
Activity: 50
Merit: 0
|
|
July 02, 2017, 04:09:33 AM |
|
I tried to start my own thread and no one really seemed to want to help..
but maybe on here you guys can offer some help.
I have the 480 strix 8G with Samsung memory.
I've tried the ubermix 3.1 but my hashes actually went down with it. I get the best when I just copy 1750 to 2000. But I have to have my core at 1410 mem at 2100 and target power +50% (with asus tweak) to get 28 mhs on ethereum. Gpuz says 200w for just the rx 480..
I've been playing with my settings for days now and this is the only way I can get 28 and I know I shouldn't be pulling that much power.
I have not yet managed to my bios yet, but I do have the same card has you, just using afterburner at the moment. Settings, +0 (zero) target power 1133 core 2250 memory I get 27.5 mhs I think the core is too high and the target power. With those settings I get 4 mhs I'm not a bios modder, but in the short term have you considered flashing it back to the original and testing settings with trixx or afterburner, using the settings I use. |
|
|
|
|
TicTacKiller
Newbie
Offline
Activity: 20
Merit: 0
|
|
July 02, 2017, 04:43:39 AM |
|
I tried to start my own thread and no one really seemed to want to help..
but maybe on here you guys can offer some help.
I have the 480 strix 8G with Samsung memory.
I've tried the ubermix 3.1 but my hashes actually went down with it. I get the best when I just copy 1750 to 2000. But I have to have my core at 1410 mem at 2100 and target power +50% (with asus tweak) to get 28 mhs on ethereum. Gpuz says 200w for just the rx 480..
I've been playing with my settings for days now and this is the only way I can get 28 and I know I shouldn't be pulling that much power.
I have not yet managed to my bios yet, but I do have the same card has you, just using afterburner at the moment. Settings, +0 (zero) target power 1133 core 2250 memory I get 27.5 mhs I think the core is too high and the target power. With those settings I get 4 mhs I'm not a bios modder, but in the short term have you considered flashing it back to the original and testing settings with trixx or afterburner, using the settings I use. I just did, and my drivers crashed. I lowered the mem to 2200 and I got 23mhs.. So what I've realized is the core affects my speed the most and I need a higher core than everyone else needs.. and it doesn't really make sense to me... |
|
|
|
|
amedeusx
Newbie
Offline
Activity: 82
Merit: 0
|
|
September 01, 2020, 05:22:18 PM |
|
hi. anyone have bios for this card gives 30.8 mhs or more?
|
|
|
|
|
PerfectCircle
Member
Offline
Activity: 252
Merit: 11
|
|
September 03, 2020, 12:02:55 PM |
|
That's a low result from a RX480, you should be getting 30 to 32MH/s mining Ethash algorithm, it's probably that the GPU is getting way too hot, if this is it then it will lose its hashing speed for sure, you can get thermal pads on the memories on the gpu, not that hard and change the thermal paste too |
|
|
|
sxemini
Member
Offline
Activity: 1558
Merit: 69
|
|
September 03, 2020, 12:17:29 PM |
|
That's a low result from a RX480, you should be getting 30 to 32MH/s mining Ethash algorithm, it's probably that the GPU is getting way too hot, if this is it then it will lose its hashing speed for sure, you can get thermal pads on the memories on the gpu, not that hard and change the thermal paste too You answer on a 3 years old comment? And you see that he is dual mining? |
|
|
|
|
|
john1010
|
|
September 04, 2020, 02:52:17 PM |
|
I have tried many bios mod that are available in anoraks forum some of them are okay but most of the mod there brick my gpu, I was able to bring it back in the factory mod but the code error 43 is my unsolve problem. Anyway my asus strx rx 570 4gb with the 1119 1900 mem clock/core got 27.8-28MH
|
|
|
|
|
|
