minerstat: mining OS + ASIC monitoring + Windows mining

[coinscrow]

msOS Update
- Added support for AMD Workstation drivers. To install use command: amd-update --workstation --install 21.20
- Added new console command: toggle-agent to enable agent screen on boot.
- Added partial support for DIMGREY_CAVEFISH (W6600) GPUs with workstation cards. ClockTune may not work correctly.
- Improved AMD Radeon VII memory detection.
- Improved driver update scripts for a higher success rate.
- Improved GPU sorting.
- Updated PCI ID database.

minerstat for Windows v6.4.3
Changes since v6.4.2 version:
- Resolved an issue with Trex arg config type.

msOS Miner Update
 nbminer v39.4

Windows Miner Update
 nbminer v39.4

nbminer: Resolved mining issue with Octopus algorithm.

[coinscrow]

msOS Update
- Improved Xorg initialization that will help some Nvidia rigs boot faster.
- Enabled OverDrive for AMD Radeon PRO W5000 and W6000 Series.

msOS Miner Update
 nanominer v3.3.12

Windows Miner Update
 nanominer v3.3.12

nanominer: Added Verthash for AMD GPUs. Fixed Raven on Nvidia with 470.57 Linux driver. Reduced stale shares on Raven. Fixed crash when nanominer started with some AMD GCN3 and older GPUs.

[coinscrow]

Sessions
We have changed the maximum number of concurrent devices (PC, Phone, Tablet, ...) that can access the user's account. Five devices for Paid accounts and three devices for Free accounts.

ClockTune
Added Apply and Apply with restart buttons to ClockTune. You can now decide if you wish to restart mining client or not.

msOS and Windows miner update
 nbminer v39.5
 trex v0.23.1
 gminer v2.69

nbminer: Lower power consumption on Nvidia GPUs on Autolykos2 algorithm. New LHR mode for mining ERGO, enable it by manually adding -lhr option. Same as LHR mode in ethash, -lhr value represents expected hashrate to reach value percent of non-LHR GPU's hashrate, supports comma-separated list to indicate -lhr value for each GPU, and -lhr -1 to disable.
trex: Bug fixes and improvements.
gminer: Added auto-tune for LHR GPUs (enabled by default, to disable pass --lhr_autotune 0). Other bug fixes and improvements.

[coinscrow]

msOS and Windows miner update
 gminer v2.70
 lolminer v1.33

gminer: Improved auto-tune for LHR GPUs; use --lhr_tune to tune LHR GPUs (value range is -10 to 10).
lolminer: Better performance of LHR. Recommended driver for LHR v2 is v470.74. Cards are automatically detected and tuned if they are LHR.

[JFoxOne]

Workers list
You can now filter workers by Paused Alerts and/or Paused Triggers. There is also an icon indicator besides worker's name if the alerts or triggers are paused.

[coinscrow]

Credits
- Added Refer a Friend program that allows you (or your friend) to get from 8% to 13% RevShare in form of minerstat Credits every time your referred friend completes an order. Read more at https://minerstat.com/help/refer-a-friend

msOS and Windows miner update
 nanominer v3.3.13
 teamredminer v0.8.6
 trex v0.24.0

nanominer: Improved Autolykos2 performance on Nvidia Turing GPUs. Reduced Autolykos2 power consumption on Nvidia GPUs.
teamredminer: Added support for Firopow algorithm. Other bug fixes and improvements.
trex: Automatic LHR unlocks and dual mining mode. You can now mine ETH (~30% of full speed) and other coins (~70%). ETH+ERGO (8GB+) ETH+RVN (8GB+ on msOS, 10GB+ on windows) ETH+CFX (10GB+).

Latest T-Rex release allows dual mining for LHR cards with some interesting coins combinations. Here are tutorials on how to set it up with minerstat (keep in mind that dual mining is supported on minerstat dashboard too, so you will see proper reporting for both coins you are mining ):
- ETH and ERG: https://minerstat.com/help/how-to-dual-mine-eth-and-ergo-with-t-rex
- ETH and RVN: https://minerstat.com/help/how-to-dual-mine-eth-and-rvn-with-t-rex
- ETH and CFX: https://minerstat.com/help/how-to-dual-mine-eth-and-cfx-with-t-rex

[coinscrow]

msOS and Windows miner update
 trex v0.24.2

trex: Enabled LHR unlock functionality for Autolykos2 algorithm. LHR auto-tune function for Ethash and Autolykos2. Resolved hashrate degradation issue with KawPow algorithm.

[coinscrow]

msOS Miner Update
 srbminer-multi v0.8.1
 teamredminer v0.8.6.2

Windows Miner Update
 phoenix-eth v5.8b
 srbminer-multi v0.8.1
 teamredminer v0.8.6.2

phoenix-eth: Implemented optimized kernels for AMD RX6600XT cards. Added support for the latest AMD Windows drivers. Note that Radeon VII cards will not work with Windows drivers 21.6.1 or higher you need to use older drivers for proper operation of these cards. Other fixes and small improvements.
srbminer-multi: Added FiroPow, KawPow, ProgPowSero, ProgPowVeil, ProgPowZano, ProgPowVeriblock algorithms. Small improvements on the Autolykos2 algorithm. Other bug fixes and improvements.
teamredminer: Added a synthetic algo 'mtp_firopow' that will use the correct algo given the system time and shut down the miner at the time of the Firo fork on Oct 26. Split the Ethash and ProgPow algos into separate binaries, mainly for some Vegas that ran into stability issues going from 0.8.5 to 0.8.6. SSL Improvements.

Note: This phoenix-eth beta version has not been uploaded for msOS. We have noticed miner crash upon start, waiting for a newer build.

[coinscrow]

msOS and Windows miner update
 nanominer v3.3.14
 lolminer v1.34

lolminer: Improved performance of RTX 3060 and RTX 3060 Ti by up to 2%. Added support for RTX A6000 / RTX A5000 / RTX A4000 Nvidia GPUs.

[coinscrow]

msOS and Windows miner update
 trex v0.24.5
 phoenix-eth v5.8c

trex: Increased hashrate by 1-4% with Autolykos2 algorithm.
phoenix-eth: Fixed a crash on Linux when mining on RDNA2 AMD GPUs (RX6000) with 20.40 openCL.

[JFoxOne]

msOS and Windows miner update
nanominer v3.4.0

nanominer: Added Firopow algoritm for the upcoming FIRO hardfork.

[coinscrow]

msOS and Windows miner update
 nanominer v3.4.1
 nbminer v39.6

nanominer: Added zombie mode for AMD GPUs on FiroPoW algorithm.
nbminer: Higher hashrate, more stable LHR unlocking for both -lhr-mode 1 and -lhr-mode 2. Default LHR mode changes to -lhr-mode 1 for LHR GPUs. Removed cuckAToo and cuckAToo32 algorithm. To enable Snapshots use: -cmd-output 1 in Config Editor.

[JFoxOne]

Billing
We have added Fast checkout for Binance Pay, Bitcoin.com, and Elly wallet.
Payments made from these wallets are now confirmed instantly and have lower fees.

[JFoxOne]

Use SPOOKY2021 on checkout to save 12%-29% on your next order 😱👻

[coinscrow]

msOS and Windows miner update
 nbminer v39.7
 lolminer v1.34a

nbminer: Enabled LHR mode by default for RTX 3060 LHR V1. Improved LHR lock detection in certain situations. Removed support for SERO.
lolminer: Resolved issues with defected shares that appeared in 1.34 or earlier with the start of epoch 450. Changes on LHR parameters of 3070 ti & 3080.

Telegram
You can now write your worker's name to the bot (https://t.me/minerstatbot) and new options will open up: View - to view short status of the worker; Reboot; Restart; Shutdown.

[coinscrow]

msOS and Windows miner update
 nanominer v3.4.2
 srbminer-multi v0.8.2
 wildrig-multi v0.30.0

nanominer: Improved Ergo performance by up to 60% on AMD Vega family (RX Vega 56, RX Vega 64, Radeon VII) and slightly for AMD Polaris family (RX 5xx).
wildrig-multi: Fixed support for different drivers for RDNA/RDNA2 GPUs. Added support for GhostRider algorithm.

[coinscrow]

msOS Update
 Improved AMD fan curve with assigned virtual/bus IDs.
 Resolved an issue in cases where power data from AMD GPUs went mismatch on GUI.

msOS and Windows miner update
 wildrig-multi v0.30.1

wildrig-multi: Fixed rejected shares on GhostRider. Added support for RX550 cards on the latest drivers.

[JFoxOne]

msOS and Windows miner update
> lolMiner v1.35 - Improved performance on ERGO for AMD Hawaii generation of chips by about 2%. Some other bug fixes and improvements.
> Team Red Miner v0.8.6.3 - Updated mining for ERGO.

Workers' list
- Added selection field for number of workers per page (at the bottom of the workers list right besides pages): 10, 25 (default), 50, 100.
- Added filter and red notification if number of boards that are hashing is different than what is defined in worker's config.

[JFoxOne]

msOS and Windows miner update
gminer v2.71 - Improved LHR performance with two new modes --lhr_mode 0 (energy saving) and --lhr_mode 1 (maximum performance). Improved RVN mining performance.

[JFoxOne]

msOS and Windows miner update
> Trex v0.24.6 - Improved LHR unlock and added ETH+FIRO dual mining.
> Nanominer v3.4.3 - Improved KAWPOW and FiroPoW on Nvidia GPUs for up to 3%.