minerstat: mining OS + ASIC monitoring + Windows mining

[coinscrow]

Testing out 3.2

i've setup DCR, LBC, etc...

whattomine shows ETH and LBC

minerstat 3.2 window shows ETH and LBC is best
yet it opens with ETH and DCR   thoughts?

**edit**
And despite me changing the pool address in the address page (for profile switch setup), it continues to use the default eu pool when i changed it to a us pool.

**edit**

so just found out.

even thou I have it set to profile switch (running the beta 3.2) it still uses the "config editor" page to manage the miners, not the "address editor" or the algorithm settings as previously mentioned.
This is a bit concerning, since all the addresses in config editor point to something else and not the one i have set in my address editor area as instructed.

Main reason i want to use minerstat, is so i don't have to manage these command lines and input the correct attributes to make it run right.

Read F.A.Q:
https://minerstat.com/helper/17.html

You need to click "Configure this RIG for Profit Switch on Config Editor"

Your configs need to look in the same way, after:

[1713403265]

1713403265

[1713403265]

1713403265

[1713403265]

1713403265

[r1rider01]

Thanks.   

Maybe update that if you pick from the drop down profile switcher it does this for you.

[r1rider01]

Can I request a coin to be added?

DBIX please?

[coinscrow]

Can I request a coin to be added?

DBIX please?

dbix already supported, just with incorrect revenue calculation.
if not detected copy your pool here

[r1rider01]

Can I request a coin to be added?

DBIX please?

dbix already supported, just with incorrect revenue calculation.
if not detected copy your pool here

where do i put the pool address  and set the pool url?

[r1rider01]

dumb question maybe... but i'm dual mining LBC, but my LBC pool doesn't show any unpaid, is it going direct to ETH then?

if i don't need a wallet address for dual mining can i just put a pool address and set the coin to YES to mine it?

[coinscrow]

dumb question maybe... but i'm dual mining LBC, but my LBC pool doesn't show any unpaid, is it going direct to ETH then?

if i don't need a wallet address for dual mining can i just put a pool address and set the coin to YES to mine it?

you are always need a pool and a wallet.
if you dont want disable coin or turn off dual mining.

[r1rider01]

dumb question maybe... but i'm dual mining LBC, but my LBC pool doesn't show any unpaid, is it going direct to ETH then?

if i don't need a wallet address for dual mining can i just put a pool address and set the coin to YES to mine it?

you are always need a pool and a wallet.
if you dont want disable coin or turn off dual mining.

I want to dual mine, and i have an LBC wallet.  what im saying is that the pool shows me hashing (http://yiimp.ccminer.org/?address=bWJaGRkUkQhpeDs8hPZ6uRC8Hy1PLVHApi)  but i have nothing showing thats unpaid or unconfirmed.  So where are all the coins going?

[Bones972]

I am trying to get XMR-Stack up and running for a friend with an AMD Ryzen X1500. (Quad Core with 8 Threads)

We are only pulling 10 hash right now so I know that's not right!
I have already locked large pages as well in windows so that's not the issue....
Can someone share the first several lines of their config file showing how to get more threads running? 

I have tried to find a read me file on XMR-stack but cant find anything!

Here is the config I have been using to get it set up to run.

"cpu_threads_conf" :
[
       { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
       { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
],
"use_slow_memory" : "warn",
"nicehash_nonce" : false,
"use_tls" : false,
"tls_secure_algo" : true,
"tls_fingerprint" : "",
"pool_address" : "stratum+tcp://xmr-usa.dwarfpool.com:8005",
"wallet_address" : "XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX",
"pool_password" : "XXXXXXXXXXXXXXXX",
"call_timeout" : 10,
"retry_time" : 10,
"giveup_limit" : 0,
"verbose_level" : 6,
"h_print_time" : 60,
"output_file" : "",
"httpd_port" : 3333,
"prefer_ipv4" : true,
"aes_override" : false,
"daemon_mode": false,

Thanks for any help guys!!

[coinscrow]

v1.0 is released on Android! Get it now!
⬇️ Download ⭐️ Rate and Comment
[iOS during the next week]
https://goo.gl/ZcdYGT

more to come !!

In the upcoming versions:
- Exchange Balance (Poloniex, Bittrex, etc..)
- Push notifications
- Miner Switch
- Charts
- Pool Checker v2

[Bones972]

v1.0 is released on Android! Get it now!
⬇️ Download ⭐️ Rate and Comment
[iOS during the next week]
https://goo.gl/ZcdYGT

more to come !!

In the upcoming versions:
- Exchange Balance (Poloniex, Bittrex, etc..)
- Push notifications
- Miner Switch
- Charts
- Pool Checker v2

Just downloaded it... WORKS AWESOME!!! GREAT JOB!!!

[coinscrow]

v1.0 is released on Android! Get it now!
⬇️ Download ⭐️ Rate and Comment
[iOS during the next week]
https://goo.gl/ZcdYGT

more to come !!

In the upcoming versions:
- Exchange Balance (Poloniex, Bittrex, etc..)
- Push notifications
- Miner Switch
- Charts
- Pool Checker v2

Just downloaded it... WORKS AWESOME!!! GREAT JOB!!!

the community and i found some bugs there will be an update within 24 hour. after improvements and new functions 

[coinscrow]

Some hotfix for Android App has been added.
Now work as it should on every device:

https://play.google.com/store/apps/details?id=io.cordova.minerstapp

Find an issue?
Drop a mail to app [ @ ] minerstat.com

[coinscrow]

I am trying to get XMR-Stack up and running for a friend with an AMD Ryzen X1500. (Quad Core with 8 Threads)


"cpu_threads_conf" :
[
       { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
       { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
 { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
 { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
 { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
 { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
 { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
],
"use_slow_memory" : "warn",

i DISPLAYED what you need to do.
And Read faq about CPU miner tricks

I want to dual mine, and i have an LBC wallet.  what im saying is that the pool shows me hashing (http://yiimp.ccminer.org/?address=bWJaGRkUkQhpeDs8hPZ6uRC8Hy1PLVHApi)  but i have nothing showing thats unpaid or unconfirmed.  So where are all the coins going?

I see immature balance here. Maybe going to your wallet, if it not your wallet change on algo or direct in Config Editor.

[r1rider01]

ya just took a while to show :-O


ok next thing, i want UBIQ to be in the mix of profit switch, but there is no hash rate setting for ETHASH.  Will this be added soon?

[coinscrow]

ya just took a while to show :-O


ok next thing, i want UBIQ to be in the mix of profit switch, but there is no hash rate setting for ETHASH.  Will this be added soon?

daggerhashimoto

[coinscrow]

there some issues maybe ddos, the problem will some in short time.

[coinscrow]

Hosting issue:

"There is ongoing maintenance work associated with observed problem in our network. Over the next 30 minutes the problem will be corrected.
Sorry for the inconvenience."

Everything work as it should after

[r1rider01]

still currently showing down for me.

[coinscrow]

Still no info about the server. When it will fixed i start a backup and i move the whole ms to a reliable hosting.

This issue not an attack or not caused by us.
So, patience, we need to wait.
It only depend on the hosting