[ANN][PASL]-[PASCAL Lite]-[The Future is Almost Here]

[adaseb]

Get PascalLite listed on Crytopia

We need ~0.21 BTC (Basically 100000 DOT/BTC) to get listed on Crytopia.

Crytopia BTC Bounty Donation Address:

1JKjH4d27H1ieUyz5EHPrDNRBRSeQypZ8M

Currently 0.10 BTC donated ~ 0.11 BTC remaining

Only send from an address you control, DONT SEND FROM AN EXCHANGE INCASE I NEED TO ISSUE REFUNDS.

Address had 1 withdraw transaction to test the private key since its located on cold storage.

Crytopia already said they would list our coin they just need their ~0.21 BTC
https://bitcointalk.org/index.php?topic=1669443.msg17909903#msg17909903

I'll let this bountry run for 30 days... so on April 7th 2017, if ~0.21 BTC is not raised, all amounts will be issued refunds. So only send from an address you control because I will send it back to the same inputs. So the refund will go to your BTC address or one of your BTC change address in your wallet according to what inputs were used in the transaction.

[1713577374]

1713577374

[1713577374]

1713577374

[1713577374]

1713577374

[adaseb]

Block Explorer is now LIVE!


www.PascalLite.com





Please support continued development of Pascal Lite by donating some of your spare coins to account "0-10".

[adaseb]

Nodes?

  CT_Discover_IPs =  'pascallite.ddns.net;pascallite2.ddns.net;pascallite3.ddns.net;pascallite.dynamic-dns.net;pascallite2.dynamic-dns.net;pascallite3.dynamic-dns.net';

[lockepi]

still buying coins + account pm me

[michaelwang33]

buying coins message me

[code_honesty]

Buying coins also. Pm me. 1200sat.

Edit: I already received an offer. Thanks for all the PM.

[Amph]

hashrate of other rig are not displayed if they all point to the same account for the pool? how to add workers?

[adaseb]

hashrate of other rig are not displayed if they all point to the same account for the pool? how to add workers?

Just use a different account # for each worker.

[Amph]

hashrate of other rig are not displayed if they all point to the same account for the pool? how to add workers?

Just use a different account # for each worker.

it's what i'm doing, but in the dashboard the other account show 0 hash, only one is active

mmh something wrong indeed i'm getting new job without any share accepted or rejected...

[adaseb]

hashrate of other rig are not displayed if they all point to the same account for the pool? how to add workers?

Just use a different account # for each worker.

it's what i'm doing, but in the dashboard the other account show 0 hash, only one is active

It should not be like that. I manually need to type in an account to see the worker and hit enter, and then I refresh and put in another account number and hit enter. All of them have a hashrate if they are mining.

Are you mining into your Account Number or with your PUBKEY ?

[Amph]

hashrate of other rig are not displayed if they all point to the same account for the pool? how to add workers?

Just use a different account # for each worker.

it's what i'm doing, but in the dashboard the other account show 0 hash, only one is active

It should not be like that. I manually need to type in an account to see the worker and hit enter, and then I refresh and put in another account number and hit enter. All of them have a hashrate if they are mining.

Are you mining into your Account Number or with your PUBKEY ?

same thing as you, but only one show the hash, the other is still at zero, i'm using a different account number for each worker

i'm using one of the account generated in solo mining

[nightraven]

I think there is a bug in UTime.pas. I got banned several times for having the wrong time although I was quite sure my computer's clock was correct.

I UTime.pas I found a function Function "DateTime2UnivDateTime":

Function DateTime2UnivDateTime(d:TDateTime):TDateTime;
{$IFDEF FPC}
begin
  Result := UniversalTimeToLocal(d);
//  Result := LocalTimeToUniversal(d);
end;
{$ELSE}

It returns local time + 1 hours not the local time  

[adaseb]

hashrate of other rig are not displayed if they all point to the same account for the pool? how to add workers?

Just use a different account # for each worker.

it's what i'm doing, but in the dashboard the other account show 0 hash, only one is active

It should not be like that. I manually need to type in an account to see the worker and hit enter, and then I refresh and put in another account number and hit enter. All of them have a hashrate if they are mining.

Are you mining into your Account Number or with your PUBKEY ?

same thing as you, but only one show the hash, the other is still at zero, i'm using a different account number for each worker

i'm using one of the account generated in solo mining

I don't think that's normal. Are you sure the miner is submitting shares? You sure you put in the correct Account # with the checksum. Maybe wait till xiphon gets back.

[code_honesty]

I think there is a bug in UTime.pas. I got banned several times for having the wrong time although I was quite sure my computer's clock was correct.

I UTime.pas I found a function Function "DateTime2UnivDateTime":

Function DateTime2UnivDateTime(d:TDateTime):TDateTime;
{$IFDEF FPC}
begin
  Result := UniversalTimeToLocal(d);
//  Result := LocalTimeToUniversal(d);
end;
{$ELSE}

It returns local time + 2 hours not the local time  

You can always change your timezone. try changing it to any time zone and check if you will still get banned. Unless you manually put 2 hours forward then you'll have problems.

[Amph]

hashrate of other rig are not displayed if they all point to the same account for the pool? how to add workers?

Just use a different account # for each worker.

it's what i'm doing, but in the dashboard the other account show 0 hash, only one is active

It should not be like that. I manually need to type in an account to see the worker and hit enter, and then I refresh and put in another account number and hit enter. All of them have a hashrate if they are mining.

Are you mining into your Account Number or with your PUBKEY ?

same thing as you, but only one show the hash, the other is still at zero, i'm using a different account number for each worker

i'm using one of the account generated in solo mining

I don't think that's normal. Are you sure the miner is submitting shares? You sure you put in the correct Account # with the checksum. Maybe wait till xiphon gets back.

i checked and it's not submitting any, but now that i close the only mining rig that is working, this too isn't submitting any

i'm using the excavator nicehash miner, it say that nicehash is not supported, but i think thye are referring to the rented hash

[adaseb]

I think there is a bug in UTime.pas. I got banned several times for having the wrong time although I was quite sure my computer's clock was correct.

I UTime.pas I found a function Function "DateTime2UnivDateTime":

Function DateTime2UnivDateTime(d:TDateTime):TDateTime;
{$IFDEF FPC}
begin
  Result := UniversalTimeToLocal(d);
//  Result := LocalTimeToUniversal(d);
end;
{$ELSE}

It returns local time + 2 hours not the local time  

Give us more info about your location, operating system, etc. You I think are having this issue also with Pascal Coin correct?

[adaseb]

i checked and it's not submitting any, but now that i close the only mining rig that is working, this too isn't submitting any

i'm using the excavator nicehash miner, it say that nicehash is not supported, but i think thye are referring to the rented hash

So the nicehash miner works on some rigs but not others?

I think their stratum is slightly different so maybe that's why its not working for you.

Can't really help you too much since i dont have any Nvidia GPUs.

[Amph]

yeah it's weird it connect only with one rig at time, if i add other they don't get any accepted

[code_honesty]

I think there is a bug in UTime.pas. I got banned several times for having the wrong time although I was quite sure my computer's clock was correct.

I UTime.pas I found a function Function "DateTime2UnivDateTime":

Function DateTime2UnivDateTime(d:TDateTime):TDateTime;
{$IFDEF FPC}
begin
  Result := UniversalTimeToLocal(d);
//  Result := LocalTimeToUniversal(d);
end;
{$ELSE}

It returns local time + 2 hours not the local time  

Give us more info about your location, operating system, etc. You I think are having this issue also with Pascal Coin correct?

I think hes using modded wallet. Well thats not allowed in here.

[nightraven]

I think there is a bug in UTime.pas. I got banned several times for having the wrong time although I was quite sure my computer's clock was correct.

I UTime.pas I found a function Function "DateTime2UnivDateTime":

Function DateTime2UnivDateTime(d:TDateTime):TDateTime;
{$IFDEF FPC}
begin
  Result := UniversalTimeToLocal(d);
//  Result := LocalTimeToUniversal(d);
end;
{$ELSE}

It returns local time + 2 hours not the local time  

Give us more info about your location, operating system, etc. You I think are having this issue also with Pascal Coin correct?

First let me correct myself it returns local time + 1hour, sorry!

I live in Denmark and my computer is set to central european time zone as it should be. But this is not the problem.

The function DateTime2UnivDateTime should retur Universal time, that is what the name says but it calls a fpc function that returns local time.

Another function seems to be wrong too:

Function UnivDateTime2LocalDateTime(d:TDateTime):TDateTime;
{$IFDEF FPC}
begin
//  Result := UniversalTimeToLocal(d);
  Result := LocalTimeToUniversal(d);
end;

{$ELSE}

It is supposed to return local time but calls a fpc function that returns universal time