[ANN][XCN] Cryptonite - NEW Thread | 1st mini-blockchain coin | Bounties!

[gjsteele71]

Hi All,

It seems like a question that was already answered somewhere, but I don't see it.  I still have coins on Polo I have not been able to withdraw because they had the wallet disabled for months and I had given up.  Is there a wallet I can use to do this?  Or can I open an account on one of the exchanges that still accept it?

Thanks!

[1713956647]

1713956647

[1713956647]

1713956647

[George5]

Hi All,

It seems like a question that was already answered somewhere, but I don't see it.  I still have coins on Polo I have not been able to withdraw because they had the wallet disabled for months and I had given up.  Is there a wallet I can use to do this?  Or can I open an account on one of the exchanges that still accept it?

Thanks!

New wallets here: http://cryptonite.info/

Also XCN can be currently deposited and traded  on bter.com

[pallas]

Hi guys,

Just a little update. I'm still building the full blockchain, it takes a lot of time because few nodes have all the blocks, or at least from the block height I need. It is progressing faster than before (makes sense: the higher the block height, the more nodes will have it available).

I'm in contact with bittrex but, unfortunately, I still can't tell if they are going to add XCN or not. What you could do (to help with listing) is contacting them (via slack, twitter, etc.) and say you would like Cryptonite to be listed on their exchange. Mining, thus incrementing the network hashrate, will also help, as it's one of their parameters for coin evaluation.

Thanks!

Hi pallas,
So what block are you at now? I hope my node will start contributing too cuz I was using the wallet since the mid 2016

Btw, is there any compiled CPU miner for Windows? I'd like to try one.


To all,
Guys really, dont hesitate to promote XCN and spread the word

I'm at block number 1M.

[bogdanb]

I could not found a way to make my 280x to mine xcn.
Any miner for AMD? Old claymore do not work on suprnova. Suprnova do not accept external wallet and claymore miner accept only xcn wallet.
I have 3 amd 280x that can add couple mh to the network, but i can't make them work....

[joblo]

Btw, is there any compiled CPU miner for Windows? I'd like to try one.

Only one I'm aware of...

https://github.com/1gh/cpuminer-cryptonite/releases

[xland86]

Hope it still on, sending link in pm

[Luzina90]

Giveaway till 14 april like it said

[farosa]

Send in pm link on twitter too

[George5]

Send in pm link on twitter too

Guys  please read the last posts of the dev (or stop pretending that you didn't see those...)!!!


THE GIVAWAY IS OVER FOR NOW

Keep an eye on the updates, another giveaway could possibly start soon when the slack channel is on.

[oldschoolgamer]

my new version wallet seemed to go corrupt last night , its ok as i keep a backup of the chain , wallet.dat is fine its just the chain .... hope this debug helps pallas , ive fixed the issue by replacing the chain with backup .


2017-04-13 04:22:59 Cryptonite version v0.1.2.0-gedc4e25-beta (Tue, 21 Mar 2017 15:34:46 +0100)
2017-04-13 04:22:59 Using OpenSSL version OpenSSL 1.0.1l 15 Jan 2015
2017-04-13 04:22:59 Default data directory C:\Users\Magoo\AppData\Roaming\Cryptonite
2017-04-13 04:22:59 Using data directory C:\Users\Magoo\AppData\Roaming\Cryptonite
2017-04-13 04:22:59 Using at most 125 connections (2048 file descriptors available)
2017-04-13 04:22:59 Using 4 threads for script verification
2017-04-13 04:22:59 Using wallet wallet.dat
2017-04-13 04:22:59 init message: Verifying wallet...
2017-04-13 04:22:59 CDBEnv::Open : LogDir=C:\Users\Magoo\AppData\Roaming\Cryptonite\database ErrorFile=C:\Users\Magoo\AppData\Roaming\Cryptonite\db.log
2017-04-13 04:22:59 Bound to [::]:8253
2017-04-13 04:22:59 Bound to 0.0.0.0:8253
2017-04-13 04:22:59 init message: Loading block index...
2017-04-13 04:22:59 Opening LevelDB in C:\Users\Magoo\AppData\Roaming\Cryptonite\blocks\index
2017-04-13 04:22:59 Opened LevelDB successfully
2017-04-13 04:22:59 Loaded trie at 000000002443bbea74a94516e390ebfc724c2cccc6df43c9644ee24bafce310c 225428
2017-04-13 04:25:35 LoadBlockIndexDB(): last block file = 0
2017-04-13 04:25:35 LoadBlockIndexDB(): last block file info: CBlockFileInfo(blocks=364611, size=103816437, heights=0...1413847, time=2014-07-28...2017-04-12)
2017-04-13 04:25:35 LoadBlockIndexDB(): transaction index enabled
2017-04-13 04:25:35 Best Block: 000000002443bbea74a94516e390ebfc724c2cccc6df43c9644ee24bafce310c
2017-04-13 04:25:35 LoadBlockIndexDB(): trieOnline=1 hashBestChain=000000000834ea3d80b443a990fa7803b172fee786e1332f06bc8fb354e0d00c height=1413798 date=2017-04-12 15:01:26 progress=nan
2017-04-13 04:25:35 init message: Verifying blocks...
2017-04-13 04:25:35  block index          156117ms
2017-04-13 04:25:35 init message: Loading wallet...
2017-04-13 04:25:35 nFileVersion = 10200
2017-04-13 04:25:35 Keys: 102 plaintext, 0 encrypted, 102 w/ metadata, 102 total
2017-04-13 04:25:35  wallet                  117ms
2017-04-13 04:25:35 init message: Rescanning...
2017-04-13 04:25:35 Rescanning last 47 blocks (from block 1413751)...
2017-04-13 04:25:35 ERROR: ReadBlockFromDisk : OpenBlockFile failed
2017-04-13 04:25:35 ReadBlockFromDisk: Could not find block 000000001351975465a426eb71aca46b37f869eb679fa7661cdcd6ef1fbdcc5f
2017-04-13 04:25:35 ERROR: ReadBlockFromDisk : OpenBlockFile failed
2017-04-13 04:25:35 ReadBlockFromDisk: Could not find block 000000000f94b3093ba2c9f4d6cb3dae76b3031ecea5362447b9cf4d8101bd58
2017-04-13 04:25:35 AddToWallet 83ae475122585086bf5b26ac35962ef11412bc0db53bdfbb378add3904aff030  new
2017-04-13 04:25:35  rescan                  163ms
2017-04-13 04:25:36 Connect tip : 000000002352d13d7b734a1c8262a5133fae94ae0b3de58ff96749eb9f1c012e
2017-04-13 04:25:36 ERROR: ReadBlockFromDisk : OpenBlockFile failed
2017-04-13 04:25:36 ReadBlockFromDisk: Could not find block 000000000f94b3093ba2c9f4d6cb3dae76b3031ecea5362447b9cf4d8101bd58
2017-04-13 04:25:36 UpdateTip()
2017-04-13 04:25:36 UpdateTip: new best=000000002352d13d7b734a1c8262a5133fae94ae0b3de58ff96749eb9f1c012e  height=1413799  log2_work=57.471278  tx=1  date=2017-04-12 15:02:48 progress=1.000000
2017-04-13 04:25:36 Cannot fastforward chain because of missing data: 0000000015256c9dd9426bb4570a0d02c0f1e6581fc410d70bcedf988cb0ab16
2017-04-13 04:25:38 Activate 000000002352d13d7b734a1c8262a5133fae94ae0b3de58ff96749eb9f1c012e
2017-04-13 04:25:39 ERROR: ReadBlockFromDisk : OpenBlockFile failed
2017-04-13 04:25:39 ReadBlockFromDisk: Could not find block 000000001351975465a426eb71aca46b37f869eb679fa7661cdcd6ef1fbdcc5f

keep up good work

[pallas]

when you run the wallet again, does it sync?

[oldschoolgamer]

when you run the wallet again, does it sync?

no i was getting the assertion failed popup box upon opening the wallet . Replaced the chain (blocks,trie) with backup from few days ago and its syncing now seems fine again . win10 btw

[e.nexus]

mine does the same, posted the debug a few pages back.

[pallas]

mine does the same, posted the debug a few pages back.

I will look into it today, thanks everybody for reporting.

[Oleg4250]

Does not work on Windows 7:

Assertion failed!
Program: C:\...\cryptonite-qt.exe
File:trieview.cpp, Line 305

Expression: blockCacha.ReadBlockFromDisk(block, pindex)

More info please: did you upgrade or start from scratch? Was the data dir populated already?

Besides: as a general rule, it's wise to BACKUP YOUR PRIVATE KEYS (in some encrypted form). That way, if the wallet db gets corrupted, or is incompatible with a future release (which shouldn't in the case of XCN, but you never know), you can always import the key and get your coins.

I downloaded the wallet from Official Site, launched it (the directory created a new one), it was synchronized for a long time and closed with an error. I restarted it, it waits a bit and produces an error with the error
Assertion failed!
Program: C:\...\cryptonite-qt.exe
File:trieview.cpp, Line 305"

My debug.log https://yadi.sk/i/13lRyzzW3GXNb5

from the debug log, it looks like it found a chain in the data directory, are you sure it was empty?
also note that sync from scratch should take half an hour to a couple hours max.
try with a clean datadir or running with the /rescan option.

With a clean directory, the wallet starts, loads the blocks, then hangs on block 160 and then issues an error. All in the attached file
https://yadi.sk/d/Y-AuKoeU3GXxLv

Thank you for your analysis

Just ignore the error about block 160 and let it go.

The application throws an error and closes

Does anyone have a new wallet that works on Windows 7?

[pallas]

please post the last lines of debug.log
maybe it's the same issue I'm already working to fix.

[Oleg4250]

please post the last lines of debug.log
maybe it's the same issue I'm already working to fix.

I found a solution to my problem:

Clear the data folder
Launch the cryptonite-qt.exe
We wait until the "50% done" message appears, or the synchronization will reach block 160
Close the wallet
Copy Blockchain snapshot to the datadir  from https://mega.nz/#!UMA0jIJC!G6eu_06rhizCxmRDUb4MWaBVLmq4Uklz9tZTplERb6A.
Launch the cryptonite-qt.exe, wait for the synchronization

[dextronomous]

Hi there Pallas, mining here as a hero,
Pallas any news on bt38's wallets. and or bittrex or cryptopio, or polo,

 is there any news, on the fix, or snapped blockchain,

 the issue guys have, only be solved with real fast internet conn's, and the fact that you should be having cpu available to let the wallet use it,.

there should be a resync added to your shortcut only 1 time! if ever error,.

cause you're blockchain is there fully, then said,
any of these logs will show node acting strange got wrong,.blocks. so to say, stalled etc, made you're wallet go pooh pooh, and states it cannot find the correct nodes, with no other good conn's.

 just paste the blockchain, in there,
if wanted an empty wallet.dat. Later replace it with yours, or to be faster make a copy off course and use you'r own wallet.dat. 99.99% it works ok.

and don't ignore these errors. make sure it won't happen again by adding the fresh blockchain snapshot. after resync, if not succeeding normally., because of a bad node.!

Bogdan, amd miner only support some pools, and not solo, unless you got hacked hosts, and some pools, some offline now, but you can solo using nvidia

Win10 instead of crashing will not provide some disk read times at the time you're wallet lives and ask for peers with their blocks,
 so the log happens at a time that windows 10 might get into that special state, and the files can't be dumped to drive, and so non existing failing data is been loaded from good peers acting as so called bad peers.
Don't do rescan instead use /resync and it is fast as hell with the latest wallet.

[pallas]

- bittrex is testing the wallet
- crash fix is coming
- full blockchain progressing, it takes a lot of time but it will come

[George5]

- bittrex is testing the wallet
- crash fix is coming
- full blockchain progressing, it takes a lot of time but it will come

Wow 3 good news! Just right before me going to bed