Just in case anyone is wondering how to set up a .bat file, here ya go.
I am connected to zenmine.pro using Claymore's ZecMiner64 with 4 Radeon XFX RX 480 8GB gpus.
Once you download Claymore's client you will want to open the folder and create a new txt file. In that text file you will want to specify the pool, stats, your wallet among other little tweeks. Here is what my .txt file looks like:
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ZecMiner64.exe -zpool us.zenmine.pro:9009 -zwal znpEN4YXZ1xHXgQvwAckWVYJdpGGoDnsZ2s.Ajek -zpsw x -tt 70,70,70,70 -fanmax 85,85,85,85 -fanmin 40,40,40,40
-zpool = the pool you want to connect to
-zwal = your zencash wallet address (will always start with zn)
-zpsw = any password you want it to be
-tt = target temp for each gpu. Multiple gpu systems are seperated with a comma, no spaces
-fanmax = highest limit in % for your gpu fans
-fanmin = lowest limit in % for your gpu fans
If you are using 2gb cards or higher you'll want to include this at the beginning of your .txt file:
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
A very basic setup would look like this:
ZecMiner64.exe -zpool us.zenmine.pro:9009 -zwal znpEN4YXZ1xHXgQvwAckWVYJdpGGoDnsZ2s.Ajek -zpsw x
After you have everything in order, save your .txt file and change the extension to .bat then double click it.
BAM! Claymore's miner will start running and you are all set.
Make sure you are using something like trixx or msi afterburner or wattman to keep an eye on your gpu voltage, clocks and memory.
My wattman settings are as follows for each gpu:
GPU 1055MHz at -16.5% intensity. Voltage for states 6 and 7 are at 910 and 929
Memory clocked at 2200MHz. Stage 2 voltage set to 920
If you feel like it you can test out my .bat settings to make sure they work.
Hope this helps someone
