[1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool

[K1773R]

How to setup --submit-stale parameter in cgminer ?
Submit or no submit ?  

K1773R
Thanks.

im submitting stales too since u can find a block even with an orphaned share.
i didnt find out yet how to do it with cgminer but i didnt check on that anway.

[1713586460]

1713586460

[1713586460]

1713586460

[1713586460]

1713586460

[1713586460]

1713586460

[1713586460]

1713586460

[PatMan]

After 12 hours on v9.2 my stale rate has gone up to 36% - whereas on the previous v9.1-9 it was steady at a lower (but still high) 18-22%. Connections seem quicker, but those damn "punishing share for stale" and "tx" messages are constantly thrown at me. Might go back to the previous build.......

0% stale for me

I know how you done it......you swithed it off! lol

[K1773R]

After 12 hours on v9.2 my stale rate has gone up to 36% - whereas on the previous v9.1-9 it was steady at a lower (but still high) 18-22%. Connections seem quicker, but those damn "punishing share for stale" and "tx" messages are constantly thrown at me. Might go back to the previous build.......

0% stale for me

I know how you done it......you swithed it off! lol

nope still mining since i dont see BTC as a goldrush/moneymaking.

[gyverlb]

im submitting stales too since u can find a block even with an orphaned share.
i didnt find out yet how to do it with cgminer but i didnt check on that anway.

cgminer submits stales automatically on p2pool without any specific configuration (a pool can request stales to be submitted and cgminer honors the request).

[K1773R]

im submitting stales too since u can find a block even with an orphaned share.
i didnt find out yet how to do it with cgminer but i didnt check on that anway.

cgminer submits stales automatically on p2pool without any specific configuration (a pool can request stales to be submitted and cgminer honors the request).

perfect, ty!

[PatMan]

After 12 hours on v9.2 my stale rate has gone up to 36% - whereas on the previous v9.1-9 it was steady at a lower (but still high) 18-22%. Connections seem quicker, but those damn "punishing share for stale" and "tx" messages are constantly thrown at me. Might go back to the previous build.......

0% stale for me

I know how you done it......you swithed it off! lol

nope still mining since i dont see BTC as a goldrush/moneymaking.

Same here, but I also don't want to be mining at a loss either. I love the p2p ethos, and the whole BitCoin thing - but can't afford to throw my cash into it without at least breaking even, which I'm not at the moment......

[cabin]

How to setup --submit-stale parameter in cgminer ?
Submit or no submit ?  

K1773R
Thanks.

im submitting stales too since u can find a block even with an orphaned share.
i didnt find out yet how to do it with cgminer but i didnt check on that anway.

Newer versions of cgminer from the last few months will submit stales automatically because p2pool sets a header telling it too.

[kano]

How to setup --submit-stale parameter in cgminer ?
Submit or no submit ?  

K1773R
Thanks.

im submitting stales too since u can find a block even with an orphaned share.
i didnt find out yet how to do it with cgminer but i didnt check on that anway.

Newer versions of cgminer from the last few months will submit stales automatically because p2pool sets a header telling it too.

cgminer does it by default, you have to tell it to NOT do it if you don't want it to.
--no-submit-stale
That change was back in April 2.3.6

[PatMan]

How to setup --submit-stale parameter in cgminer ?
Submit or no submit ? 

K1773R
Thanks.

im submitting stales too since u can find a block even with an orphaned share.
i didnt find out yet how to do it with cgminer but i didnt check on that anway.

Newer versions of cgminer from the last few months will submit stales automatically because p2pool sets a header telling it too.

cgminer does it by default, you have to tell it to NOT do it if you don't want it to.
--no-submit-stale
That change was back in April 2.3.6

Kano, I just pm'd you regarding your usb-linux writeup - very nice work.

[Ed]

P2Pool release 9.2

stales still about 20%, it is normal?

[BitCoiner2012]

Was using 9.0 fine and suddenly on reboot was spammed with this message and it closes instantly when using:


https://i.imgur.com/W4We3.png

Now I downloaded 9.2 just in case, but it connects quickly, but never do my miners seem to connect.. not even on the host machine. Anyone..?

Firewall? Looks like its blocked somehow.

Fixed the problem, if there was any, with a reboot on 9.2 However still no explanation of 9.0 happenings.

[forrestv]

Was using 9.0 fine and suddenly on reboot was spammed with this message and it closes instantly when using:


https://i.imgur.com/W4We3.png

Now I downloaded 9.2 just in case, but it connects quickly, but never do my miners seem to connect.. not even on the host machine. Anyone..?

Firewall? Looks like its blocked somehow.

Fixed the problem, if there was any, with a reboot on 9.2 However still no explanation of 9.0 happenings.

If you see those errors ("Error when requesting noncached value:"), if means that there was a failure earlier on. I should probably mask those somehow... anyway, scroll up to see what actually went wrong.

[tiberiandusk]

Been getting a lot of 401 Authorization Required errors recently. Haven't changed anything and the user and password for bitcoind are correct.

[AV]

I was in this boat. Password can`t contain any symbol. Try replace it. Use mixed-case letters and numbers.

[PatMan]

I was in this boat. Password can`t contain any symbol. Try replace it. Use mixed-case letters and numbers.

Oh? That's news. I've have symbols in my password & don't get any such errors....

[lenny_]

I just tried newest version from git overnight. And I have to admit, p2pool is still unusable for me. On my machine with 1GB RAM, p2pool is consuming 523 MB RAM (1002 MB virtual). I have some other processes running on my Debian machine and I cannot give away half of my RAM to p2pool, because of very high swapfile usage. Before v9 it was much lower and p2pool was running absolutely fine. I have to shutdown my node.

[cabin]

I'm rebuilding my p2pool node due to a hardware failure.

Running the latest version as of 15 minutes ago from the GIT and I get the following:

Code:

2012-11-30 08:31:23.335637 > Traceback (most recent call last):
2012-11-30 08:31:23.336126 > Failure: twisted.python.failure.DefaultException: sharereply result: too long
2012-11-30 08:31:23.336928 Requesting parent share b68a0d0b from 173.11.125.162:9333
2012-11-30 08:31:25.159341 > in download_shares:
2012-11-30 08:31:25.159967 > Traceback (most recent call last):
2012-11-30 08:31:25.160453 > Failure: twisted.python.failure.DefaultException: sharereply result: too long
2012-11-30 08:31:25.161314 Requesting parent share b68a0d0b from 83.161.255.174:9333
2012-11-30 08:31:28.133602 > in download_shares:
2012-11-30 08:31:28.134254 > Traceback (most recent call last):
2012-11-30 08:31:28.134743 > Failure: twisted.python.failure.DefaultException: sharereply result: too long
2012-11-30 08:31:28.135574 Requesting parent share b68a0d0b from 173.11.125.162:9333
2012-11-30 08:31:28.166702 P2Pool: 0 shares in chain (0 verified/4565 total) Peers: 6 (0 incoming)
2012-11-30 08:31:28.167326  Local: 0H/s in last 0.0 seconds Local dead on arrival: ??? Expected time to share: ???
2012-11-30 08:31:30.027398 > in download_shares:
2012-11-30 08:31:30.028164 > Traceback (most recent call last):
2012-11-30 08:31:30.028618 > Failure: twisted.python.failure.DefaultException: sharereply result: too long
2012-11-30 08:31:30.029446 Requesting parent share b68a0d0b from 173.11.125.162:9333
2012-11-30 08:31:31.816948 > in download_shares:
2012-11-30 08:31:31.817605 > Traceback (most recent call last):
2012-11-30 08:31:31.818093 > Failure: twisted.python.failure.DefaultException: sharereply result: too long
2012-11-30 08:31:31.818912 Requesting parent share b68a0d0b from 83.161.255.174:9333
2012-11-30 08:31:34.376080 > in download_shares:
2012-11-30 08:31:34.376732 > Traceback (most recent call last):
2012-11-30 08:31:34.377251 > Failure: twisted.python.failure.DefaultException: sharereply result: too long
2012-11-30 08:31:34.378040 Requesting parent share b68a0d0b from 75.12.89.18:9333

Not sure if it's worth worrying about or not but posting just in case.

I got this too on a fresh install and fresh git this morning. Did it eventually get all the shares and recover? I'm still getting them after 10 minutes.

[AV]

Oh? That's news. I've have symbols in my password & don't get any such errors....

I have not had time to understand what symbol brings problems. I just left the only letters and numbers, and the problem went away.

[PatMan]

Oh? That's news. I've have symbols in my password & don't get any such errors....

I have not had time to understand what symbol brings problems. I just left the only letters and numbers, and the problem went away.

Yeah, I know some symbols can cause problems, but I like to use them when I can as an extra security layer.

I've noticed a steady lowering of the stale rate of late, as well as a lowering of users of the pool. Is there a general correlation with regards users v stales - or has Forrestv been doing some expert tweaking?

[tiker]

I'm rebuilding my p2pool node due to a hardware failure.

Running the latest version as of 15 minutes ago from the GIT and I get the following:

Code:

2012-11-30 08:31:23.335637 > Traceback (most recent call last):
2012-11-30 08:31:23.336126 > Failure: twisted.python.failure.DefaultException: sharereply result: too long
2012-11-30 08:31:23.336928 Requesting parent share b68a0d0b from 173.11.125.162:9333
2012-11-30 08:31:25.159341 > in download_shares:
2012-11-30 08:31:25.159967 > Traceback (most recent call last):
2012-11-30 08:31:25.160453 > Failure: twisted.python.failure.DefaultException: sharereply result: too long
2012-11-30 08:31:25.161314 Requesting parent share b68a0d0b from 83.161.255.174:9333
2012-11-30 08:31:28.133602 > in download_shares:
2012-11-30 08:31:28.134254 > Traceback (most recent call last):
2012-11-30 08:31:28.134743 > Failure: twisted.python.failure.DefaultException: sharereply result: too long
2012-11-30 08:31:28.135574 Requesting parent share b68a0d0b from 173.11.125.162:9333
2012-11-30 08:31:28.166702 P2Pool: 0 shares in chain (0 verified/4565 total) Peers: 6 (0 incoming)
2012-11-30 08:31:28.167326  Local: 0H/s in last 0.0 seconds Local dead on arrival: ??? Expected time to share: ???
2012-11-30 08:31:30.027398 > in download_shares:
2012-11-30 08:31:30.028164 > Traceback (most recent call last):
2012-11-30 08:31:30.028618 > Failure: twisted.python.failure.DefaultException: sharereply result: too long
2012-11-30 08:31:30.029446 Requesting parent share b68a0d0b from 173.11.125.162:9333
2012-11-30 08:31:31.816948 > in download_shares:
2012-11-30 08:31:31.817605 > Traceback (most recent call last):
2012-11-30 08:31:31.818093 > Failure: twisted.python.failure.DefaultException: sharereply result: too long
2012-11-30 08:31:31.818912 Requesting parent share b68a0d0b from 83.161.255.174:9333
2012-11-30 08:31:34.376080 > in download_shares:
2012-11-30 08:31:34.376732 > Traceback (most recent call last):
2012-11-30 08:31:34.377251 > Failure: twisted.python.failure.DefaultException: sharereply result: too long
2012-11-30 08:31:34.378040 Requesting parent share b68a0d0b from 75.12.89.18:9333

Not sure if it's worth worrying about or not but posting just in case.

I got this too on a fresh install and fresh git this morning. Did it eventually get all the shares and recover? I'm still getting them after 10 minutes.

I ended up shutting down the pool, waiting about 15 minutes and starting up again.  The message hasn't come back yet and it's been running for almost 2 days now.