Bitcoin Forum
March 19, 2024, 05:23:24 AM *
News: Latest Bitcoin Core release: 26.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 ... 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 [352] 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 ... 814 »
  Print  
Author Topic: [1500 TH] p2pool: Decentralized, DoS-resistant, Hop-Proof pool  (Read 2591571 times)
phillipsjk
Legendary
*
Offline Offline

Activity: 1008
Merit: 1001

Let the chips fall where they may.


View Profile WWW
November 25, 2013, 07:43:12 PM
 #7021

I'm all for IPv6, but will adding IPv6 support be enough for you?  I think you will still likely need to talk to IPv4 peers for a while since I doubt everyone in the pool can make the switch.

It does not have to be all or nothing. You can run dual-stack as IPv4 addresses slowly become more and more scarce. APINC has run out years ago, so many of those new Chinese users are likely to be on IPv6.
 

James' OpenPGP public key fingerprint: EB14 9E5B F80C 1F2D 3EBE  0A2F B3DE 81FF 7B9D 5160
1710825804
Hero Member
*
Offline Offline

Posts: 1710825804

View Profile Personal Message (Offline)

Ignore
1710825804
Reply with quote  #2

1710825804
Report to moderator
"Your bitcoin is secured in a way that is physically impossible for others to access, no matter for what reason, no matter how good the excuse, no matter a majority of miners, no matter what." -- Greg Maxwell
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
1710825804
Hero Member
*
Offline Offline

Posts: 1710825804

View Profile Personal Message (Offline)

Ignore
1710825804
Reply with quote  #2

1710825804
Report to moderator
1710825804
Hero Member
*
Offline Offline

Posts: 1710825804

View Profile Personal Message (Offline)

Ignore
1710825804
Reply with quote  #2

1710825804
Report to moderator
1710825804
Hero Member
*
Offline Offline

Posts: 1710825804

View Profile Personal Message (Offline)

Ignore
1710825804
Reply with quote  #2

1710825804
Report to moderator
lanfanblue
Newbie
*
Offline Offline

Activity: 31
Merit: 0


View Profile
November 26, 2013, 12:24:58 AM
 #7022

Hi forrestv and all contributors of p2pool,

Many thanks to this fantastic mining pool. It's really fun to tuning p2pool to maximize miner's income for geeky users like me.

But I wonder if you have any plan to enable IPv6 support of p2pool?
Since official bitcoin client has IPv6 enabled by default, I think enabling IPv6 support will make p2pool network even more pervasive and well connected.
More importantly, IPv6 will help those users with both v4 & v6 network, but behind firewall or NAT in v4 network, just like me.
I do have a very good connectivity to v6 network and can accept income connections.
But v4 network is NATed with high latency, and I think that might be the source of my high orphan rate.

I have checked that twisted library used in p2pool support IPv6 network, at least partially.
I'm not familiar with python, so I don't know for sure.
I wonder if it is possible to enable IPv6 network in p2pool?

Thanks again to this great mining pool. :-)
I'm all for IPv6, but will adding IPv6 support be enough for you?  I think you will still likely need to talk to IPv4 peers for a while since I doubt everyone in the pool can make the switch.
Well... Adding v6 support doesn't mean disabling v4 network. We can have both networks up and running. p2pool will talk to both existing v4 peers and new v6 peers, just like the official bitcoin client does now.
twmz
Hero Member
*****
Offline Offline

Activity: 737
Merit: 500



View Profile
November 26, 2013, 02:01:34 AM
 #7023

And p2pool.info has been moved to forrestv's servers.  If you get any errors right now, they are probably related to us making DNS changes and the errors will go away over the next hour as your DNS cache expires.  If you still see errors after a few hours, let us know.

Was I helpful?  1TwmzX1wBxNF2qtAJRhdKmi2WyLZ5VHRs
WoT, GPG

Bitrated user: ewal.
zkfq123
Newbie
*
Offline Offline

Activity: 49
Merit: 0


View Profile
November 27, 2013, 02:32:05 PM
 #7024

p2pool is got a very few block recent days,i dont know why?
twmz
Hero Member
*****
Offline Offline

Activity: 737
Merit: 500



View Profile
November 27, 2013, 03:44:23 PM
 #7025

p2pool is got a very few block recent days,i dont know why?

Luck

Was I helpful?  1TwmzX1wBxNF2qtAJRhdKmi2WyLZ5VHRs
WoT, GPG

Bitrated user: ewal.
Amph
Legendary
*
Offline Offline

Activity: 3206
Merit: 1069



View Profile
November 28, 2013, 09:13:12 AM
Last edit: November 28, 2013, 09:32:50 AM by Amph
 #7026

my p2pool don't even start, with litecoin
zvs
Legendary
*
Offline Offline

Activity: 1680
Merit: 1000


https://web.archive.org/web/*/nogleg.com


View Profile WWW
November 28, 2013, 02:44:11 PM
 #7027

my p2pool don't even start, with litecoin

turn listen on litecoind?
Amph
Legendary
*
Offline Offline

Activity: 3206
Merit: 1069



View Profile
November 28, 2013, 05:27:05 PM
 #7028

ok now it start, but cgminer(7.2) don't go ahead seems dead(black screen)
yuyi
Newbie
*
Offline Offline

Activity: 6
Merit: 0


View Profile
November 28, 2013, 06:44:40 PM
 #7029

OK, so I'm guessing people probably use 204.10.105.113:9332/static because of the domain p2pool.org... even though it's horribly set up & has a 2% fee.  quite sad really, when one looks at the one month/one year chart.  (oh and ofc he never took me up on my offer, no mails from that guy)

now, second question, why do people use elizium.name?... or is it just all local traffic?  though I'd be shocked if 95% or more of it wasn't just from random people using a remote p2pool.  400 shares I think is enough to get a trend & 55 orphans is bad.   I can see there's 11 outgoing connections, but I guess I'll assume that those are just random outgoing connections?   It looks like my node @ 198.12.127.2 used one of its random outgoing connections to hook up w/ it, but not connected to me at the other two places.   normally i'd add it to --p2pool-node since it seems to be on a fast enough computer & good connection, but i've just been observing the sub 100% efficiency for the last few days & curiosity killed the cat.  Is it all just because of that interface?  The most important part is busted (the share explorer).

I also don't understand why so many people use 183.136.216.39:9332/static/graphs.html?Year when it's absolutely horrid.  10 outgoing connections, that are either totally random or not good choices.  For location (China), he's not connecting to some critical western US & Russian nodes that he should be on.  I *think* it's also on an old version of bitcoind.  at least it's at 0% fee

But why would you use that over this:   mine.yuyi.tw:9332 a far superior pool in Taiwan with 1/10th the hashrate.  This one runs 0% fee too, so that's not it

is there some place i'm missing where these sites are being advertised?  reddit?  asic hardware manufacturer forums?  lol.    

some people want to use p2pool for whatever reason, but don't want to spend money on hosting for their own node (I'll assume they live in a crap rural area like myself w/ shit for bandwidth).   but why always choose the wrong pools?   then you get all the bullshit misinformation about how p2pool pays out less than <insert x pool>.  yeah, probably cause you were on one of these low efficiency pools or running a local node that was getting 15% orphans and 5% DOA..  though if it weren't for those people, I guess the rest wouldn't be picking up the bonus

but, seriously, who is mining on one of those 3 pools right now and why?   is there anyone that reads this thread that does?   if not, where are they coming from?

你懂中文吗?我不懂英文,183.136.216.39:9332是我建立的,但是我不懂编程这些技术,这是个普通的P2POOL节点矿池。我不知道如何去固定节点,或者应该怎么固定你说的美国俄罗斯节点。我只是和朋友在一起挖矿,可能是最差的池,来自一个完全不懂电脑程序的人,服务器是朋友提供的,没有打算收取任何费用。很高兴能引起你的关注,同时我也希望能得到技术上的帮助。如果你懂中文,是否可以用中文来帮助我解决这些问题,谢谢。钱包是的0.85版本。

I had to use google translate.   Grin  I'd say talk to this guy:  mine.yuyi.tw:9332        

https://twitter.com/TaiwanPool                                  (for one, you'd want him to --p2pool-node to your pool, since he has 0 incoming)

I've been saying for a while it's by far the best server in Oceania area....   it looks like he picked up a lot of hashing power recently and is still doing well on orphans

LOL,我看懂了,你和我一样需要谷歌翻译。好吧,你的意思是说 台湾 mine.yuyi.tw:9332池子效率很高。我昨天叫矿友们去测试了,效率是要好一些。我很羡慕你们懂的如何提升矿池效率,我不懂编程这些,能力非常有限,但是我尽量让矿池效率提升。我让矿友一部分算力进入mine.yuyi.tw:9332,分散一些算力,因为P2POOL节点矿池有个瓶颈,无论你的池子效率多高,都会遇见程序的瓶颈。

当算力大于3T,会出现吞噬小算力,如图

http://i44.tinypic.com/2i8ho21.jpg

这个算力被吞噬了,完全失去了效率。

另外一个BUG,当算力大于3.5T或者4T以上,会出现算力溢出,如图

http://i42.tinypic.com/30wqqdi.jpg


这些算力是溢出的,当4.5T可以看见有100G-300G算力被溢出。

如果你能联系上P2POOL程序的作者,应该让他优化程序,对P2POOL的发展是有帮助的。对大家都有好处,P2POOL算力值有50T - 70 T,目前的难度和矿机算力看,P2POOL需要尽快修改这些BGU。

如果能P2POOL使用stratum协议,效率会更高,为什么是目前的Getwork协议?效率很低!!!

请帮助我转达给P2POOL的作者,谢谢。我的英文不好,让他来看图吧。

另外你说的 https://twitter.com/TaiwanPool 添加为节点。IP = 59.24.3.173

请问bitcoin.conf该如何写呢?请帮助我,我真的不懂编程,这些命令我一点不懂。谢谢

rpcuser=abc
rpcpassword=123
server=1
rpcport=8332
port=8333
rpcconnect=127.0.0.1
addnode=59.24.3.173
addnode=

这样写正确吗???

可以给我一份这个bitcoin.conf的内容吗?请写上你认为更多的非常好的节点。谢谢!!!

如果你能帮助我,将会获得更多的算力加入P2POOL!

                      
                                                  来自中国的P2POOL矿友 Wlz2011



1. DOA變100%的問題我也有注意到,目前重開挖礦程式就會好,似乎和運算能力沒關係,比較像是隨機出現。

2.

我目前沒有大於4.5T的環境可以測試,而且最近在我礦池上都沒發生null。

比對之前有出現短暫null時,整體礦池也沒有超過4.5Thash/s過。

是否可以試著換挖礦程式 cgminer 或 bfgminer 試試。

3. taiwan pool的配置無法從外面連線,我有先將你的IP加入我連線的清單,伺服器下次重啟就會連上你的礦池。

如果有任何問題歡迎pm跟我討論 Smiley
zkfq123
Newbie
*
Offline Offline

Activity: 49
Merit: 0


View Profile
November 29, 2013, 04:48:41 AM
Last edit: November 29, 2013, 06:17:52 AM by zkfq123
 #7030

i dont think  the pool :http://mine.yuyi.tw:9332/  is more efficent. it just only more unfair !

 i had put 2 avalon abuout 210g  in this pool  for few days (5day)

it give me about fewer 70% share than other  180g worker!!!!!


i had found only the more speed you havd one machine avalon or knc  180g,you can  got more share than others

 have 2 two 110g , the shares will be eated by firest worker with 180g 。

this is the reson why my speed 210g is only got 70% btc of the 180g work



now, i found only one address  just like 13rK1JeimK5PdZf9oBJSUeF2RyP6VDEYah is more efficent
but others worker is more fewer

 
matthewh3
Legendary
*
Offline Offline

Activity: 1372
Merit: 1000



View Profile WWW
November 29, 2013, 12:34:15 PM
 #7031

Is anyone mining October Jupiters on P2Pool with cgminer successfully.  I know when we tried the other week it would mine OK but every so often cgminer would crash.  So it'd just go unhashing for hours until we realised.  We have two October Jupiters and a November one on the way that we'd like to hash on P2Pool.

xyzzy099
Legendary
*
Offline Offline

Activity: 1062
Merit: 1041



View Profile
November 29, 2013, 02:27:09 PM
Last edit: November 29, 2013, 02:39:25 PM by xyzzy099
 #7032

Is anyone mining October Jupiters on P2Pool with cgminer successfully.  I know when we tried the other week it would mine OK but every so often cgminer would crash.  So it'd just go unhashing for hours until we realised.  We have two October Jupiters and a November one on the way that we'd like to hash on P2Pool.

I just started mining my Jupiter on P2Pool 2 days ago, but so far it has been running great - no problems at all.

CGMiner reports a low average hash rate - ~450 GH/s while I typically see a very consistent 566 GH/s on other pools - but P2Pool reports close to the actual hash rate, and the payouts are correct for my actual hash rate.

[EDIT:  I should say that this is with the latest 0.99-tune firmware.  It was running the same on the plain 0.99 before I updated.]

Libertarians:  Diligently plotting to take over the world and leave you alone.
matthewh3
Legendary
*
Offline Offline

Activity: 1372
Merit: 1000



View Profile WWW
November 29, 2013, 03:34:56 PM
 #7033

Is anyone mining October Jupiters on P2Pool with cgminer successfully.  I know when we tried the other week it would mine OK but every so often cgminer would crash.  So it'd just go unhashing for hours until we realised.  We have two October Jupiters and a November one on the way that we'd like to hash on P2Pool.

I just started mining my Jupiter on P2Pool 2 days ago, but so far it has been running great - no problems at all.

CGMiner reports a low average hash rate - ~450 GH/s while I typically see a very consistent 566 GH/s on other pools - but P2Pool reports close to the actual hash rate, and the payouts are correct for my actual hash rate.

[EDIT:  I should say that this is with the latest 0.99-tune firmware.  It was running the same on the plain 0.99 before I updated.]


Yeah it too a good few days between crashes but we was losing that many coins we had to move them off P2Pool.

xyzzy099
Legendary
*
Offline Offline

Activity: 1062
Merit: 1041



View Profile
November 29, 2013, 03:49:22 PM
 #7034

Is anyone mining October Jupiters on P2Pool with cgminer successfully.  I know when we tried the other week it would mine OK but every so often cgminer would crash.  So it'd just go unhashing for hours until we realised.  We have two October Jupiters and a November one on the way that we'd like to hash on P2Pool.

I just started mining my Jupiter on P2Pool 2 days ago, but so far it has been running great - no problems at all.

CGMiner reports a low average hash rate - ~450 GH/s while I typically see a very consistent 566 GH/s on other pools - but P2Pool reports close to the actual hash rate, and the payouts are correct for my actual hash rate.

[EDIT:  I should say that this is with the latest 0.99-tune firmware.  It was running the same on the plain 0.99 before I updated.]


Yeah it too a good few days between crashes but we was losing that many coins we had to move them off P2Pool.

I remember seeing a bug fix by ckolivas for a serious memory leak that occurred when using the cgminer API.  If you were using the miner GUI alot, especially if you were using something like Bertmod, that might explain the crashes you were seeing.  If so, you might want to try with the latest cgminer.  If not, well, maybe I will start seeing crashes later too Sad  I sure hope not.

Libertarians:  Diligently plotting to take over the world and leave you alone.
wlz2011
Member
**
Offline Offline

Activity: 71
Merit: 10


View Profile
November 29, 2013, 06:32:38 PM
 #7035

OK, so I'm guessing people probably use 204.10.105.113:9332/static because of the domain p2pool.org... even though it's horribly set up & has a 2% fee.  quite sad really, when one looks at the one month/one year chart.  (oh and ofc he never took me up on my offer, no mails from that guy)

now, second question, why do people use elizium.name?... or is it just all local traffic?  though I'd be shocked if 95% or more of it wasn't just from random people using a remote p2pool.  400 shares I think is enough to get a trend & 55 orphans is bad.   I can see there's 11 outgoing connections, but I guess I'll assume that those are just random outgoing connections?   It looks like my node @ 198.12.127.2 used one of its random outgoing connections to hook up w/ it, but not connected to me at the other two places.   normally i'd add it to --p2pool-node since it seems to be on a fast enough computer & good connection, but i've just been observing the sub 100% efficiency for the last few days & curiosity killed the cat.  Is it all just because of that interface?  The most important part is busted (the share explorer).

I also don't understand why so many people use 183.136.216.39:9332/static/graphs.html?Year when it's absolutely horrid.  10 outgoing connections, that are either totally random or not good choices.  For location (China), he's not connecting to some critical western US & Russian nodes that he should be on.  I *think* it's also on an old version of bitcoind.  at least it's at 0% fee

But why would you use that over this:   mine.yuyi.tw:9332 a far superior pool in Taiwan with 1/10th the hashrate.  This one runs 0% fee too, so that's not it

is there some place i'm missing where these sites are being advertised?  reddit?  asic hardware manufacturer forums?  lol.    

some people want to use p2pool for whatever reason, but don't want to spend money on hosting for their own node (I'll assume they live in a crap rural area like myself w/ shit for bandwidth).   but why always choose the wrong pools?   then you get all the bullshit misinformation about how p2pool pays out less than <insert x pool>.  yeah, probably cause you were on one of these low efficiency pools or running a local node that was getting 15% orphans and 5% DOA..  though if it weren't for those people, I guess the rest wouldn't be picking up the bonus

but, seriously, who is mining on one of those 3 pools right now and why?   is there anyone that reads this thread that does?   if not, where are they coming from?

你懂中文吗?我不懂英文,183.136.216.39:9332是我建立的,但是我不懂编程这些技术,这是个普通的P2POOL节点矿池。我不知道如何去固定节点,或者应该怎么固定你说的美国俄罗斯节点。我只是和朋友在一起挖矿,可能是最差的池,来自一个完全不懂电脑程序的人,服务器是朋友提供的,没有打算收取任何费用。很高兴能引起你的关注,同时我也希望能得到技术上的帮助。如果你懂中文,是否可以用中文来帮助我解决这些问题,谢谢。钱包是的0.85版本。

I had to use google translate.   Grin  I'd say talk to this guy:  mine.yuyi.tw:9332        

https://twitter.com/TaiwanPool                                  (for one, you'd want him to --p2pool-node to your pool, since he has 0 incoming)

I've been saying for a while it's by far the best server in Oceania area....   it looks like he picked up a lot of hashing power recently and is still doing well on orphans

LOL,我看懂了,你和我一样需要谷歌翻译。好吧,你的意思是说 台湾 mine.yuyi.tw:9332池子效率很高。我昨天叫矿友们去测试了,效率是要好一些。我很羡慕你们懂的如何提升矿池效率,我不懂编程这些,能力非常有限,但是我尽量让矿池效率提升。我让矿友一部分算力进入mine.yuyi.tw:9332,分散一些算力,因为P2POOL节点矿池有个瓶颈,无论你的池子效率多高,都会遇见程序的瓶颈。

当算力大于3T,会出现吞噬小算力,如图



这个算力被吞噬了,完全失去了效率。

另外一个BUG,当算力大于3.5T或者4T以上,会出现算力溢出,如图




这些算力是溢出的,当4.5T可以看见有100G-300G算力被溢出。

如果你能联系上P2POOL程序的作者,应该让他优化程序,对P2POOL的发展是有帮助的。对大家都有好处,P2POOL算力值有50T - 70 T,目前的难度和矿机算力看,P2POOL需要尽快修改这些BGU。

如果能P2POOL使用stratum协议,效率会更高,为什么是目前的Getwork协议?效率很低!!!

请帮助我转达给P2POOL的作者,谢谢。我的英文不好,让他来看图吧。

另外你说的 https://twitter.com/TaiwanPool 添加为节点。IP = 59.24.3.173

请问bitcoin.conf该如何写呢?请帮助我,我真的不懂编程,这些命令我一点不懂。谢谢

rpcuser=abc
rpcpassword=123
server=1
rpcport=8332
port=8333
rpcconnect=127.0.0.1
addnode=59.24.3.173
addnode=

这样写正确吗???

可以给我一份这个bitcoin.conf的内容吗?请写上你认为更多的非常好的节点。谢谢!!!

如果你能帮助我,将会获得更多的算力加入P2POOL!

                      
                                                  来自中国的P2POOL矿友 Wlz2011



1. DOA變100%的問題我也有注意到,目前重開挖礦程式就會好,似乎和運算能力沒關係,比較像是隨機出現。

2.

我目前沒有大於4.5T的環境可以測試,而且最近在我礦池上都沒發生null。

比對之前有出現短暫null時,整體礦池也沒有超過4.5Thash/s過。

是否可以試著換挖礦程式 cgminer 或 bfgminer 試試。

3. taiwan pool的配置無法從外面連線,我有先將你的IP加入我連線的清單,伺服器下次重啟就會連上你的礦池。

如果有任何問題歡迎pm跟我討論 Smiley

很高兴看见你回复,台湾池主,总算是遇见一个会说中文的 Smiley

1. DOA100%重启好像不能解决问题,我认为这是程序构架上的问题,算力出现吞噬,当然我没有再次测试,暂时的处理方法是分散了算力,有朋友暂时提供了另外的免费服务器,当然免费是不可能长久持续的。

2. 4.5T的高压环境,NULL已经在3个服务器测试,均出现了这个问题,我认为这也是程序构架的问题,当然如果你想看见这个结果,我可以尝试安排这样的环境在你的服务器进行测试,正好过几天我会关闭服务器几小时,应该你能看见这样的效果。

3. 我不知道矿池之间该如何正确的固定连线,我有添加在CONF文件里添加你的http://mine.yuyi.tw:9332的IP地址,不知道这样做是否正确,但是我感觉好像不是这样操作。https://twitter.com/TaiwanPool 我根本就打不开这个页面。

4. 我这边是WIN环境,Python 运行矿池,如果可以的话,请告诉我如何固定连线别的矿池,我不懂编程这些的,所以对很多设置都是陌生的,非常感谢。

很高兴认识你,希望P2POOL算力上去,对大家都有好处。
xyzzy099
Legendary
*
Offline Offline

Activity: 1062
Merit: 1041



View Profile
November 29, 2013, 07:30:42 PM
 #7036

Can anyone tell me some tricks to minimize bitcoind GetBlockTemplate latency?  Mine seems to run very consistently at ~1s, but I see many public nodes with less than 0.3s.

What is the source of this latency and what can be done to address it?

Libertarians:  Diligently plotting to take over the world and leave you alone.
oldbushie
Member
**
Offline Offline

Activity: 94
Merit: 10


View Profile
November 29, 2013, 08:27:38 PM
 #7037

Since I changed to p2pool on a Linux VPS, the new custom frontend seems to show a really low "local rate reflected in shares" value compared to the "local hash rate" on that node.
http://192.30.165.92:9332/static/graphs.html?Day

Is this normal? I haven't seen it go close to or above the actual hash rate *once*.

nreal
Full Member
***
Offline Offline

Activity: 932
Merit: 100


arcs-chain.com


View Profile
November 29, 2013, 08:55:32 PM
 #7038

Can anyone tell me some tricks to minimize bitcoind GetBlockTemplate latency?  Mine seems to run very consistently at ~1s, but I see many public nodes with less than 0.3s.

What is the source of this latency and what can be done to address it?


blockmaxsize= bigger the slower, minrelaytxfee= smaller is slower , bitcoind on ssd or ramdisk is fast. Bitcoin blocks are stored very  stupid way, because blocks arent in folders, so you cant mount --bind some of them to ramdisk, I think all the blocks must be in ram or ssd to get any improvement.. 15,4gt now..


► ARCS ◄ ♦ ARCS - The New World Token (*Listed on KuCoin) ♦ ► ARCS ◄
───●●───●●───●●───●●───●●─[   Bounty Detective   ]─●●───●●───●●───●●───●●───
Website|Twitter|Medium|Telegram|Whitepaper
xyzzy099
Legendary
*
Offline Offline

Activity: 1062
Merit: 1041



View Profile
November 29, 2013, 09:09:44 PM
 #7039

Can anyone tell me some tricks to minimize bitcoind GetBlockTemplate latency?  Mine seems to run very consistently at ~1s, but I see many public nodes with less than 0.3s.

What is the source of this latency and what can be done to address it?


blockmaxsize= bigger the slower, minrelaytxfee= smaller is slower , bitcoind on ssd or ramdisk is fast. Bitcoin blocks are stored very  stupid way, because blocks arent in folders, so you cant mount --bind some of them to ramdisk, I think all the blocks must be in ram or ssd to get any improvement.. 15,4gt now..



Thanks Smiley

Libertarians:  Diligently plotting to take over the world and leave you alone.
Mogumodz
Sr. Member
****
Offline Offline

Activity: 290
Merit: 250



View Profile
November 29, 2013, 11:42:39 PM
 #7040

Since I changed to p2pool on a Linux VPS, the new custom frontend seems to show a really low "local rate reflected in shares" value compared to the "local hash rate" on that node.
http://192.30.165.92:9332/static/graphs.html?Day

Is this normal? I haven't seen it go close to or above the actual hash rate *once*.

Not sure entirely what you mean, but everything looks normal.

Bitcoin OTC rating GPG ID: 3E7974A1 P2Pool statistics: p2pool.info
Pages: « 1 ... 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 [352] 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 ... 814 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!