💥SOLARIS PLATFORM [XLR] 💥Swapping to FinaToken

[dutch_loneranger]

Hello, can i do solo mining solaris to my node or to another wallet?
When i try using internet guides, the ccminer i use is showing error: json-rpc call failed method not found.
Thank for reply.

i thought I read somewhere back that solo mining is not possible

[1714026261]

1714026261

[1714026261]

1714026261

[ironmanTR]

Can we now send our new XLR to coinexchange ?

[yume91]

Can we now send our new XLR to coinexchange ?

Do not know
There is still no noitice yet
Dev still silent

[startsts]

Can we now send our new XLR to coinexchange ?

just check deposit address format. New XLR (xevan)  has first letter capital S

[thaian]

Maybe this project was abandoned

[Ryuh]

Maybe this project was abandoned

What are you talking about? I see that you are a newbie. Are you writing this just to get a post?
Who will abandon this project right now when all things are going in a new direction and the price is climbing.

[vanessa81]

XLR is stable coin, and price is climbing. But still believe it will be more than 2$

[dutch_loneranger]

Can we now send our new XLR to coinexchange ?

just check deposit address format. New XLR (xevan)  has first letter capital S

just checked for fun .
and coinexchange wallet is maintenance mode.
and also see that from the Swapaccount a nice amount is gone

so swap is happening I think

[Dabs]

Where's the other guide for masternode setup? I'm trying to set it up on my local machine, can't seem to get it to work. (Yeah, I don't want to get a VPS just yet, I'm trying to get it to run at home first.) Would appreciate it if someone can guide me how to do this on a Windows 10 machine. If I need to set up a Linux environment, I can also do that, probably will use Debian or something small.

You can successfully setup a masternode on your local machine if it stays connected to the Solaris network all the time and if your ISP doesn't change your IP address. This is the reason why most of us  use  VPS to run masternodes
If you want to use your local machine, follow the steps outlined by @PotatoM12

Thanks. I actually got it to work before I read the post. On your local network, you may be using a router (most people do), and I forgot to port forward 60020 to my machine. After that, I got 0.4 XLR in a few hours.

I also updated the conf files so some ips are 127.0.0.1 but I'm not sure if that made a difference, but it's still working after restarting it, so that's cool.

I'm thinking of a theoretical method to have more than one masternode on the same ip address, but different port, I'll test it one of these days. If it doesn't work with just one wallet, it may involve setting up another machine (or VM).

[Wako31]

Folks, someone could help me... I cant swap my solaris coins from coinexchange(NIST5) to the new  solaris wallet(XEVAN)... sorry, im not native english speaker, so my english is rusty..

I did a test yesterday and luckly i only send 1XLR...

The steps were:

0)i went to site https://solaris.swapyourcoins.today/ and follow the instructions.

1)Enter with my XEVAN address SZaPJ1gAFgasiU1N5kCT17K8Hu2xx4bdW6 ( wallet 2.0.1 win64)

2)And receive a nist address from swap site: sgnmokEfnZZtq33wdUsuwE7R7USw8XQ5rE

3)This is the txid of NIST block explorer: 86265e9e977de9dd6b2df76ca99ab0f4811bd8f6475a9cf02db51a7933c8074d

4)Until now, i didnt receive nothing. More than 12hours.


Obs: I went to swap site again and now it has generated a different solaris nist address(sXQ2JtAB6VhL2aYs1vQtXs7wRFqyFgQSkP) from my same xevan address( SZaPJ1gAFgasiU1N5kCT17K8Hu2xx4bdW6). is it normal? should i try again with this new nist5 address?

Anyone could  help me with swap process?

Thanks in advance.

[Coinferenz]

Project looks good; so i have running a Masternode for XLR and give you Support from Austria.

Best Regards!

[dutch_loneranger]

Folks, someone could help me... I cant swap my solaris coins from coinexchange(NIST5) to the new  solaris wallet(XEVAN)... sorry, im not native english speaker, so my english is rusty..

I did a test yesterday and luckly i only send 1XLR...

The steps were:

0)i went to site https://solaris.swapyourcoins.today/ and follow the instructions.

1)Got a xevan address SZaPJ1gAFgasiU1N5kCT17K8Hu2xx4bdW6 (xevan address wallet 2.0.1 win64)

2)And got a nist address got from swap site: sgnmokEfnZZtq33wdUsuwE7R7USw8XQ5rE

3)This is the txid of nist blockexplorer: 86265e9e977de9dd6b2df76ca99ab0f4811bd8f6475a9cf02db51a7933c8074d

4)Until now, i didnt receive nothing. More than 11hours.


Obs: I went to swap site again and now it has generated a different solaris nist address(sXQ2JtAB6VhL2aYs1vQtXs7wRFqyFgQSkP) from my same xevan address( SZaPJ1gAFgasiU1N5kCT17K8Hu2xx4bdW6). is it normal? should i try again with this new nist5 address?

Anyone could  help me with swap process?

Thanks in advance.

today coinexchange will automatically switch too xevan.
so just wait

[Wako31]

Folks, someone could help me... I cant swap my solaris coins from coinexchange(NIST5) to the new  solaris wallet(XEVAN)... sorry, im not native english speaker, so my english is rusty..

I did a test yesterday and luckly i only send 1XLR...

The steps were:

0)i went to site https://solaris.swapyourcoins.today/ and follow the instructions.

1)Got a xevan address SZaPJ1gAFgasiU1N5kCT17K8Hu2xx4bdW6 (xevan address wallet 2.0.1 win64)

2)And got a nist address got from swap site: sgnmokEfnZZtq33wdUsuwE7R7USw8XQ5rE

3)This is the txid of nist blockexplorer: 86265e9e977de9dd6b2df76ca99ab0f4811bd8f6475a9cf02db51a7933c8074d

4)Until now, i didnt receive nothing. More than 11hours.


Obs: I went to swap site again and now it has generated a different solaris nist address(sXQ2JtAB6VhL2aYs1vQtXs7wRFqyFgQSkP) from my same xevan address( SZaPJ1gAFgasiU1N5kCT17K8Hu2xx4bdW6). is it normal? should i try again with this new nist5 address?

Anyone could  help me with swap process?

Thanks in advance.

today coinexchange will automatically switch too xevan.
so just wait

Nice to hear it.. Thanks alot!

[Adriano2010]

Folks, someone could help me... I cant swap my solaris coins from coinexchange(NIST5) to the new  solaris wallet(XEVAN)... sorry, im not native english speaker, so my english is rusty..

I did a test yesterday and luckly i only send 1XLR...

The steps were:

0)i went to site https://solaris.swapyourcoins.today/ and follow the instructions.

1)Got a xevan address SZaPJ1gAFgasiU1N5kCT17K8Hu2xx4bdW6 (xevan address wallet 2.0.1 win64)

2)And got a nist address got from swap site:
sgnmokEfnZZtq33wdUsuwE7R7USw8XQ5rE

3)This is the txid of nist blockexplorer: 86265e9e977de9dd6b2df76ca99ab0f4811bd8f6475a9cf02db51a7933c8074d

4)Until now, i didnt receive nothing. More than 11hours.


Obs: I went to swap site again and now it has generated a different solaris nist address(sXQ2JtAB6VhL2aYs1vQtXs7wRFqyFgQSkP) from my same xevan address( SZaPJ1gAFgasiU1N5kCT17K8Hu2xx4bdW6). is it normal? should i try again with this new nist5 address?

Anyone could  help me with swap process?

Thanks in advance.

You need to swap minimum 1 coin https://chainz.cryptoid.info/xlr/address.dws?sgnmokEfnZZtq33wdUsuwE7R7USw8XQ5rE.htm

You swap only 0.9 and you have to wait to be processed manually. Just look at block explorer and you will see that you sent only 0.9

[llanoh88]

I have a feeling once coinexchange does the swap to the new algo, we will have a huge drop? Noob selling/weak hands ect..
Hope i'm wrong!

[Adriano2010]

I have a feeling once coinexchange does the swap to the new algo, we will have a huge drop? Noob selling/weak hands ect..
Hope i'm wrong!

Why to have a huge drop ? Because miner and mansternode owners will sell coins? XLR Xevan is already listed on coinsmarkets. I don't think we will get below 1$.

[Coinferenz]

Swap is now completed on coinexchange.

[thaian]

coinexchange's swap was a success.
XLR go to the moon. 10$ in the near future.

[llanoh88]

I have a feeling once coinexchange does the swap to the new algo, we will have a huge drop? Noob selling/weak hands ect..
Hope i'm wrong!

Why to have a huge drop ? Because miner and mansternode owners will sell coins? XLR Xevan is already listed on coinsmarkets. I don't think we will get below 1$.

Right. Like me, i wont use coinsmarkets. ill use coinexchange. That being said.. some people are holding for specific exchanges (like me). im not selling today, or tomorrow and maybe not for another month but who's to say all the noobs just holding out for this exchange to bump what they have mined or gathered from masternodes. i can see a dump to about half of the current value and a bump to just under where we start from (0.00023400).

This is just my opinion. hope i'm wrong and it just skyrockets to the moon lol More exchanges = More eyes = More buys = higher price.

[lenosamsung]

Is there any solution to this question? I thought I was in the same situation.


I am wondering how to set up the solaris.conf file in Qt Wallet when running more than one master node

For example..

Masternode 1 IP : 222.222.222.91:60020
Masternode 2 IP : 222.222.222.92:60020

then, In solaris.conf file,
I should add two lines like below?

masternodeaddr=222.222.222.91:60020
masternodeaddr=222.222.222.92:60020

This is my examples of config files that work with 2 masternodes on 1 wallet.
Pay attention that local wallet's solaris.conf should not contain any masternode-related settings.
I tried to help Aureliusy in PM, but he said that he still had some issues. Anyway, this works for me, just replace stuff like MASTERNODE1_PRIVATE_KEY and mn1.ip.add.ress:60020 with your real data.

This is my local solaris.conf

Code:

rpcallowip=127.0.0.1
rpcuser=user
rpcpassword=password
staking=1
server=1
listen=1
port=60020

Local masternode.conf

Code:

masternode1   mn1.ip.add.ress:60020    MASTERNODE1_PRIVATE_KEY   TX_ID    TX_INDEX
masternode2   mn2.ip.add.ress:60020    MASTERNODE2_PRIVATE_KEY   TX_ID    TX_INDEX

masternode1 solaris.conf

Code:

rpcallowip=127.0.0.1
rpcuser=user
rpcpassword=password
staking=0
server=1
daemon=1
listen=1
port=60020
masternode=1
masternodeaddr=mn1.ip.add.ress:60020
externalip=mn1.ip.add.ress:60020
masternodeprivkey=MASTERNODE1_PRIVATE_KEY

masternode1 masternode.conf

Code:

masternode1   mn1.ip.add.ress:60020    MASTERNODE1_PRIVATE_KEY   TX_ID    TX_INDEX

masternode2 solaris.conf

Code:

rpcallowip=127.0.0.1
rpcuser=user
rpcpassword=password
staking=0
server=1
daemon=1
listen=1
port=60020
masternode=1
masternodeaddr=mn2.ip.add.ress:60020
externalip=mn2.ip.add.ress:60020
masternodeprivkey=MASTERNODE2_PRIVATE_KEY

masternode2 masternode.conf

Code:

masternode2   mn2.ip.add.ress:60020    MASTERNODE2_PRIVATE_KEY   TX_ID    TX_INDEX

Thanks,

I modified my local solaris.conf file (in QT Wallet)

Just removed that 4 lines

'''
masternode=1
masternodeaddr=mn1.ip.add.ress:60020
externalip=mn1.ip.add.ress:60020
masternodeprivkey=MASTERNODE1_PRIVATE_KEY
'''

After 10 hours with the state marked ENABLED, it finally came in 0.4 XLR from the second master node.

It WORKED! Thank you very much


But I have one more question,

In official Masternode setting guide, if I enter "masternode status" in the console window, then masternode status is displayed.

but in my case, I enter "masternode status" then "This is not a masternode (code -1)" is displayed.

For now, both masternodes are working, but I do not know why.

Do you know why?