My windows 10 doesn't start with 6 gpu-s rh470 sapphire

[Mitja123]

I have a problem,with 5gpu-s windows works good. When i put 6 gpu-s i get message with this problem attempted_execute_of_noexecute_memory.
I have 8gb ram and hard drive with 80gb.
Motherboard-asrock h81 pro btc r 2.p
Could anyone help me please?

[mewhoyou]

disable onboard GPU + Set to PCI 1.0

[Mitja123]

I don't know what you mean with set to pci 1.0Can you explain me that please?

[Elder III]

I don't know what you mean with set to pci 1.0Can you explain me that please?

I don't have that motherboard, but somewhere in the bios you can change your PCI-E settings etc. There should be an option to choose PCI 1 or perhaps to select Gen 1 (instead of Gen 2 or 3). Someone with that motherboard may be able to tell you more specifically where to find the setting.

[DevonMiner]

There should be an option to choose PCI 1 or perhaps to select Gen 1 (instead of Gen 2 or 3). Someone with that motherboard may be able to tell you more specifically where to find the setting.

I have that board, and had to set it to Gen1 for everything to work perfectly.

[minerx117]

windows 10 will watch you sleep... get windows 8.1

[dagarair]

i have built hundreds of miners none of the H81 have I had to change.

I use windows 10 pro on them and never had an issue either.  I'm  sure home works too but i have never used it.

[mikhan]

remove all cards except one, delete amd drivers using DDU
install drivers, reboot, add your second card, boot, reboot
add third card etc...

disabling onboard gpu doesn't matter