[OS] nvOC easy-to-use Linux Nvidia Mining

[funnyboy027]

Try it this morning but it's often hang, need to hard reset the whole system with +150cc and +500mc for 6x 1080ti
How to auto type the miner1 password, I need to type it 3 times before the miner running?

No you don't, the script will do this for you. Just wait a bit and see..

Maxximus007 is correct.  I would recommend trying a lower cc if your system is hanging.  mc can be higher:

try +100cc and +900mc

That's great, I will try it later, 6x 1080ti can run normally nvOS with Asrock H81 pro. I would like to try mining Skein also, hope you will release the new version soon and instruction how to mine it.

[1713427504]

1713427504

[1713427504]

1713427504

[1713427504]

1713427504

[1713427504]

1713427504

[yun9999]

Thanks for the helpful Tips Citronick.

[-droid-]

yeah I'm also looking to turn one of my 2 nvOC rigs to skein.. any future plans for this?
or is there a manual way to install it?

guess I shoulda scrolled back a few pages lol.. any updates on the alexis fork?

[fullzero]

yeah I'm also looking to turn one of my 2 nvOC rigs to skein.. any future plans for this?
or is there a manual way to install it?

Download the newest oneBash from the OP.  Until next version, it will only use the tp fork of ccminer; but you can mine dgb.

see:

https://bitcointalk.org/index.php?topic=1854250.msg19380254#msg19380254

Edit:  as bentcrypto requested it; I setup the DGB selection to use zpool auto conversion to BTC; so you actually enter a BTC address for DGB.

I can add a direct DGB payout selection (payout in DGB) if anyone wants that instead.

[fullzero]

yeah I'm also looking to turn one of my 2 nvOC rigs to skein.. any future plans for this?
or is there a manual way to install it?

guess I shoulda scrolled back a few pages lol.. any updates on the alexis fork?

I will most likely release v0015 tomorrow with it; and not all requested changes, but a lot of them.  Biggest change will be portability.  One image for all the supported motherboards + almost all Intel mobos (note bios changes are still needed).

[funnyboy027]

yeah I'm also looking to turn one of my 2 nvOC rigs to skein.. any future plans for this?
or is there a manual way to install it?

Download the newest oneBash from the OP.  Until next version, it will only use the tp fork of ccminer; but you can mine dgb.

see:

https://bitcointalk.org/index.php?topic=1854250.msg19380254#msg19380254

Edit:  as bentcrypto requested it; I setup the DGB selection to use zpool auto conversion to BTC; so you actually enter a BTC address for DGB.

I can add a direct DGB payout selection (payout in DGB) if anyone wants that instead.

I want to payout in DGB, please add this option also

[Maxximus007]

I will most likely release v0015 tomorrow with it; and not all requested changes, but a lot of them.  Biggest change will be portability.  One image for all the supported motherboards + almost all Intel mobos (note bios changes are still needed).

Wow fullzero that sounds great! Your ongoing efforts are highly appreciated!

[fullzero]

yeah I'm also looking to turn one of my 2 nvOC rigs to skein.. any future plans for this?
or is there a manual way to install it?

Download the newest oneBash from the OP.  Until next version, it will only use the tp fork of ccminer; but you can mine dgb.

see:

https://bitcointalk.org/index.php?topic=1854250.msg19380254#msg19380254

Edit:  as bentcrypto requested it; I setup the DGB selection to use zpool auto conversion to BTC; so you actually enter a BTC address for DGB.

I can add a direct DGB payout selection (payout in DGB) if anyone wants that instead.

I want to payout in DGB, please add this option also

Updated the newest oneBash link on the OP to also have a pure DGB mining option plus added an intensity variable. 

this is the relevant section:

BTC_ADDRESS="18Y5HYe3BAwAhTAkFLbD52o8NqtrN3DtpF"

DGB_AUTOCONVERT_TO_BTC="NO"                         #YES  NO
DBG_INTENSITY=26
DGB_ADDRESS="DKhCswL8Ff5UyZWdVEbyUVvDhLYMmfVLP7"
DGB_POOL="stratum+tcp://skein.mine.zpool.ca:4933"


I think it is reasonably straightforward.  If you want to mine pure DGB; replace my DGB address with your own and ensure:

COIN="DGB"


If you want to mine DGB with payouts in BTC; replace my BTC address with your own and ensure:

COIN="DGB"

DGB_AUTOCONVERT_TO_BTC="YES"

[fullzero]

I have noticed this ZEC worker (looks like a 6x 1070 rig) mining for me; I'm not sure if it is intentional or not:



For new miners: always ensure that you replace my addresses with your own for any coin you mine. (unless you are intentionally mining for me)



I have noticed a lot of XMR miners pointed to the nvOC default XMR address as well.  Could be a farm or many individual miners.

To reduce the possibility of unintended mining for me I have changed the default setting of plusCPU in the newest oneBash:

plusCPU="NO"

if you have plusCPU="YES" in oneBash; your rig will mine a very minor amount of XMR with the CPU.  To ensure this mining is for you; in this section:

# if plusCPU is "YES" replace with your XMR info
XMR_WORKER="nvOC"
XMR_ADDRESS="47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.23d5f83d0021a50d8f809f4727c8622d3ea25798942bcb1ba0eee40cc157f6 5c"
XMR_POOL="stratum+tcp://xmr-us-east1.nanopool.org:14444"

you need to replace my XMR address:

XMR_ADDRESS="47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.23d5f83d0021a50d8f809f4727c8622d3ea25798942bcb1ba0eee40cc157f6 5c"

with your own (unless you are intentionally mining for me)

I have had reports from users of 1080ti rigs having slightly lower GPU hashrates while using all threads with plusCPU.  I have also noticed this myself with 7+ GPU rigs.  I implemented a threadCOUNT (was xleejohnx's idea) which I default to 1 thread in the newest oneBash. 

# Number of threads for plusCPU
threadCOUNT="1"         

In my tests using 1 thread had no effect on GPU hashrates; so I recommend making an XMR wallet if you don't already have one (you can also use a poloniex deposit address as well for this) and using plusCPU with threadCOUNT="1" .

[Nexillus]

Fullzero,

First I wanted to say this is an excellent edition to anyone doing nvidia mining on linux. Just hands down and the fact that you made it free is even crazier!

Thank you so much.

Secondly, a question is is their a way to put failover addresses?

[fullzero]

Fullzero,

First I wanted to say this is an excellent edition to anyone doing nvidia mining on linux. Just hands down and the fact that you made it free is even crazier!

Thank you so much.

Secondly, a question is is their a way to put failover addresses?

Glad you like nvOC. 

this depends on the client, EWBF has no failover, Claymore does.  not sure about ccminer or sgminer (I will check later) 

I can implement this in a later oneBash for you; going to work on other things for new version today however.

[citronick]

Fullzero,

First I wanted to say this is an excellent edition to anyone doing nvidia mining on linux. Just hands down and the fact that you made it free is even crazier!

Thank you so much.

Secondly, a question is is their a way to put failover addresses?

Glad you like nvOC.  

this depends on the client, EWBF has no failover, Claymore does.  not sure about ccminer or sgminer (I will check later)  

I can implement this in a later oneBash for you; going to work on other things for new version today however.

sgminer failover is available.

best thing about it is that you put the failover pool all in the same command line, without external config file like Claymore

[philipma1957]

Fullzero,

First I wanted to say this is an excellent edition to anyone doing nvidia mining on linux. Just hands down and the fact that you made it free is even crazier!

Thank you so much.

Secondly, a question is is their a way to put failover addresses?

Glad you like nvOC. 

this depends on the client, EWBF has no failover, Claymore does.  not sure about ccminer or sgminer (I will check later) 

I can implement this in a later oneBash for you; going to work on other things for new version today however.

pm sent

[fullzero]

I don't do the best job of tracking every coin, and I haven't mined Skein myself. 

If it uses an algorithm supported by ccminer then you should be able to mine it with nvOC.  It most likely has a specific fork which performs better.  If you find me the link to the clients repo and tell me what pool you want to / do use to mine skein, then I can add the client and modify oneBash for the next version.

In windows I use the alexis78 version from nemo's miner and I mine at Z-pool : https://bitcointalk.org/index.php?topic=1777336.0

My batfile looks like this :

Code:

ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u BTC ADDDRESS -p c=BTC

https://github.com/alexis78/ccminer

Skein is paying really well atm...$23/1080ti/day

So I added this client and then tried to mine DGB with it; there is a problem: the linux version of this fork doesn't support skein.   

[-droid-]

I don't do the best job of tracking every coin, and I haven't mined Skein myself. 

If it uses an algorithm supported by ccminer then you should be able to mine it with nvOC.  It most likely has a specific fork which performs better.  If you find me the link to the clients repo and tell me what pool you want to / do use to mine skein, then I can add the client and modify oneBash for the next version.

In windows I use the alexis78 version from nemo's miner and I mine at Z-pool : https://bitcointalk.org/index.php?topic=1777336.0

My batfile looks like this :

Code:

ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u BTC ADDDRESS -p c=BTC

https://github.com/alexis78/ccminer

Skein is paying really well atm...$23/1080ti/day

So I added this client and then tried to mine DGB with it; there is a problem: the linux version of this fork doesn't support skein.   

wow that sucks, I'm doing about 2GH to 2.1GH on my 3x1080 TI rig on nvOC with intensity set to 26

[fullzero]

I don't do the best job of tracking every coin, and I haven't mined Skein myself. 

If it uses an algorithm supported by ccminer then you should be able to mine it with nvOC.  It most likely has a specific fork which performs better.  If you find me the link to the clients repo and tell me what pool you want to / do use to mine skein, then I can add the client and modify oneBash for the next version.

In windows I use the alexis78 version from nemo's miner and I mine at Z-pool : https://bitcointalk.org/index.php?topic=1777336.0

My batfile looks like this :

Code:

ccminerAlexis78.exe -r 0 -a skein -o stratum+tcp://skein.mine.zpool.ca:4933 -u BTC ADDDRESS -p c=BTC

https://github.com/alexis78/ccminer

Skein is paying really well atm...$23/1080ti/day

So I added this client and then tried to mine DGB with it; there is a problem: the linux version of this fork doesn't support skein.   

wow that sucks, I'm doing about 2GH to 2.1GH on my 3x1080 TI rig on nvOC with intensity set to 26

Not sure how different that is from what the TP fork does; that's about 700 per 1080ti?

[fullzero]

v0015 is up on the OP.

  this version is intended for USB keys
  However you can use an SSD or HDD with a USB adapter cable: https://bitcointalk.org/index.php?topic=1854250.msg19300078#msg19300078
  Or you can follow this process to enable Autolaunch with an SSD or HDD install: https://bitcointalk.org/index.php?topic=1854250.msg19328385#msg19328385
 
Change Log:
v0015
  auto detect: all GPUs OC (for all fully supported motherboards and almost all Intel motherboards)
  disabled password lockout
  added screen and openssh-server(disabled by default)
  plusCPU setting to enable cpuminer-opt to mine XMR on the side
  threadCOUNT selection option for plusCPU
    ETHERMINEdotORG switch
    DGB COIN selection with DGB or BTC payout
    SIA COIN selection
    Installed Ubuntu Updates

Please let me know if there are any issues with this version not OCing cards with mobos. 

Currently I know it cannot OC all 7x cards with an MSI z97 Gaming 5 mobo; and it does not OC with ryzen mobos.

[keepitsane]

Hey thanks for all the help. Just a quick question, I am trying to mine ETH however regardless of what pool I try I keep getting ETH: No pools specified: Specify at least one valid pool in "-epool" parameter. Any suggestions on what I can do? Also the main pool I was trying was ethermine and I was using the updated oneBash.

[decayinjack]

Thank you for the updates Fullzero!

Quick question, the v15 notes state that openssh server is installed but disabled. How do we enable it?

[fullzero]

Hey thanks for all the help. Just a quick question, I am trying to mine ETH however regardless of what pool I try I keep getting ETH: No pools specified: Specify at least one valid pool in "-epool" parameter. Any suggestions on what I can do? Also the main pool I was trying was ethermine and I was using the updated oneBash.

My guess is that you are either not setting ETHERMINEdotORG="YES" or you accidentally removed the quotes around your pool.

I tried ethermine and it worked for me: