To setup remote re-configuration of rigs / remote viewing using SSH and screen:PREP RIGS:On each rig you wish to ssh into ensure:
in 1bash
have your phone or a pencil and paper with you as
you will also need the ip address of each rig:to find the ip:
scroll to the top of the mining process where is shows:
find this ip and record it with a picture or write it down / save it to a text file ect.
When you have finished this with each rig; go to the computer you are going to use to ssh from:
SETUP CLIENT:If it is a windows computer I recommend using putty:
http://www.putty.org/ for this as it will let you use as many instances into as many rigs as you want.
for each rig open a new putty instance then:
enter:
replacing ipaddress with the miners ip from eariler; if it was 192.168.1.124, then you would enter:
and click open
confirm your intent to access the system if asked, then enter password:
miner1
when prompted
Then move on to the Reconfigure section below:
If you are on a linux computer:
open a terminal and enter:
sudo apt-get install openssh-client
when it is done:
for each rig open a new terminal instance or tab then:
enter:
replacing ipaddress with the miners ip from eariler; if it was 192.168.1.124, then you would enter:
confirm your intent to access the system if asked, then enter password:
miner1
when prompted
Then move on to the Reconfigure section below:
RECONFIGURE:after SSHing into a rig:
open 1bash with nano:
make changes / edits; then press ctrl + shift + X to quit selecting Y to save changes
Then:
we need to kill the current mining process by entering:
now we have stopped the GPU mining process
SCREEN:after killing the current mining process:
enter this to prevent a possible error:
Then attach to the current mining process screen (v0018 will auto restart the mining process):
if you are updating for _Parallax_ Mode enter:
then
and you have remote viewing of the mining process in this screen.
you can close the ssh session (window / terminal) whenever desired
then later reSSH in and enter:
to return to the mining process whenever desired.
If you are at this point and have a farm command center PC: Congratulations!
Right now the simplest way to setup Internet access to your rigs is this:Setup a single computer with SSH sessions into each rig (I recommend saving each session config or making a file with the settings to launch each.)
On this computer install Teamviewer or a similar application.
Connect via your mobile / tablet / work computer ect to the control computer with Teamviewer or similar application, then on that rig Monitor / reconfigure each rig via its SSH session.
This should be reasonably simple (given the complexity of what you are doing) to setup.
See the _Parallax_ Mode guide for autoupdating oneBash LinkAdditional useful cmds for Screen from UberDaemon:To detach from a screen (i.e. you want to close the SSH connection while mining continues afterwards) it's
To reattach to a screen (resume connection) it's
screen -x [name you gave the screen session]
# once you've typed 3-4 characters hit the tab key and it will fill out the rest and save you some typing
If you can't remember what you named the session use:
If you're new to screen you may not know you can open a 2nd shell and switch back and forth (i.e. your miner is running on one shell and you open a 2nd to run nvidia-smi):
once in screen you create a 2nd shell (or 3rd, 4th, etc) with
To switch back and forth use: