[OS] nvOC easy-to-use Linux Nvidia Mining

[Sydewinder]

had version 15 on a few rigs running very stable at 30.3mh/ gpu for a few days . Temp - 55 at 75fan speed .
now i'm testing on Zec and I get around 450sol - 150cc 700mc 125pl
Wanted to make a 9gpu machine but no luck with second m.2 adapter and I think i fucked a MB in the process.
On nanopool if it has been discussed can somebody link the post to where I have to edit in linux so I can add my e-mail and pass so I can modify the min payout ?

Thanks

could it be the m.2 port maybe? theres sata m.2 and pcie m.2 check you mobo user guide.

[1713904963]

1713904963

[1713904963]

1713904963

[1713904963]

1713904963

[fullzero]

Loving this! What's the trick for RDP? I set it up on the Linux side but cannot connect RDP from my Windows machine.
Thanks

try this guide:

https://www.lifewire.com/setup-ubuntu-remote-desktop-4129666

Let me know if this guide is good or not.

[fullzero]

I am at my wits end trying to get this to boot. I have managed to get it to boot a couple of times, but each time it does it freezes after failing to connect to EWBF(as I currently do not have a connection set up, I need to make some changes to make my wifi dongle work but cannot do this due to the issues) - following restarting it results in a kernel error. About 95% of the time after reflashing to attempt again it doesn't boot and I just get a blank screen after it attempts to boot into Ubuntu (no loading screen).

This happens with both OC and non-OC. Mostly attempting to get this to work on default settings moving forward.

I am using a MSI z170a SLI and 2x GTX 1060's (6gb) with a DVI monitor. Using a SanDisk Extreme 64GB USB stick.
Above 4G decoding is enabled and BIOS has been flashed to the latest 3.A version (issue occured before the flash too).

Has anyone encountered similar problems?

When Above 4G decoding is enabled it is normal to see a black screen while ubuntu is loading.

Maybe this will work:

Ensure the monitor is connected to the primary GPU ( the one in the 16x slot closest to the CPU )

Disconnect the USB or SSD/HHD from the rig.

Fully power off everything: including the PSU.

Press the power button several times to clear any remaining power in the mobo.

Turn the PSU powerswitch back to | "on".

power on (without the USB attached)

See if the bios posts; if you get nothing in 20 seconds; press ctrl + alt + del repeatedly until the system reboots.

Wait and see if the bios posts.

If the bios posts attach the USB key to a USB 2.0 port and press ctrl + alt + delete.


if it boots; stop the mining process before it starts mining:

then go to the top left and click the ubuntu button

type u

and click on software updater

run updates

reboot

Let me know if this works.

[fullzero]

does nvOC work with Asrock H170A-X1 ? Win10 refuses to recognize more than 3 cards, not matter what i do.

Never tried that mobo; I would try the same as in this post:

https://bitcointalk.org/index.php?topic=1854250.msg19791716#msg19791716

First thanks for your work putting this together. I'm loving it so far. I went ahead and added a few currencies such as mona hush and i forget what else but cant seem to get lyra2z algo to work. tried both versions of ccminer that are included but no dice.

Download the newest oneBash at the top of the OP; it has a MONA coin selection.

Tell me what pool you use for HUSH and I will add it to the next oneBash.

Hey guys (and gals?), I normally wouldn't post something like this, but I know 1070s are getting quite hard to find and I know some of you might appreciate this info.  Dell has PNY 1070s on "sale" for $429 and they'll give you $25 in "rewards."

Not a stellar deal usually, but given the demand for GPUs right now I thought this might help someone out.

AFAIK this isn't a referral link.  I am copying and pasting from slickdeals.net.  I have no horse in this race so to speak, just trying to look out for my fellow nvOC users.

http://www.dell.com/en-us/member/shop/pny-technologies-geforce-gtx-1070-graphics-card-gf-gtx-1070-8-gb-gddr5-pcie-3-0-x16-dvi-hdmi-3-x-displayport/apd/490-bdnl/graphic-video-cards?prg=1&VEN1=10550055-4485850-b15b92ce5ab211e78f958e7a0d52cbc40INT&AID=4485850&dgc=CJ&DGSeg=DHS&cid=198375&lid=45846&acd=12309198375458460&VEN3=813103911618984054

This is a good deal considering all Nvidia GPUs are almost sold out.

had version 15 on a few rigs running very stable at 30.3mh/ gpu for a few days . Temp - 55 at 75fan speed .
now i'm testing on Zec and I get around 450sol - 150cc 700mc 125pl
Wanted to make a 9gpu machine but no luck with second m.2 adapter and I think i fucked a MB in the process.
On nanopool if it has been discussed can somebody link the post to where I have to edit in linux so I can add my e-mail and pass so I can modify the min payout ?

Thanks

What mobo are you using?

I would recommend trying slushpool if you are looking to use specific payout amounts.

With nanopool at the end of your workername add a / and your email address

for example if my workername was nvOC and my email was bob@aol.com I would use:

Code:

ZEC_WORKER="nvOC/bob@aol.com"

password can be set in this block of code:

Code:

if [ $COIN == "ZEC" ]
then

if [ $EWBF_VERSION == "3_3" ]
then
HCD='/home/m1/zec/v3_3/miner'
fi

if [ $EWBF_VERSION == "3_4" ]
then
HCD='/home/m1/zec/v3_4/miner'
fi

ZECADDR="$ZEC_ADDRESS.$ZEC_WORKER"
until $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZEC_POOL --user $ZECADDR --pass z --port $ZEC_PORT;
   do
   echo "FAILURE; reinit in 5" >&2
   sleep 5
done
fi

on this line:

Code:

until $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZEC_POOL --user $ZECADDR --pass z --port $ZEC_PORT;

by changing:

Code:

--pass z

z to your password

or you can just use z

Hey guys (and gals?), I normally wouldn't post something like this, but I know 1070s are getting quite hard to find and I know some of you might appreciate this info.  Dell has PNY 1070s on "sale" for $429 and they'll give you $25 in "rewards."

Not a stellar deal usually, but given the demand for GPUs right now I thought this might help someone out.

AFAIK this isn't a referral link.  I am copying and pasting from slickdeals.net.  I have no horse in this race so to speak, just trying to look out for my fellow nvOC users.

http://www.dell.com/en-us/member/shop/pny-technologies-geforce-gtx-1070-graphics-card-gf-gtx-1070-8-gb-gddr5-pcie-3-0-x16-dvi-hdmi-3-x-displayport/apd/490-bdnl/graphic-video-cards?prg=1&VEN1=10550055-4485850-b15b92ce5ab211e78f958e7a0d52cbc40INT&AID=4485850&dgc=CJ&DGSeg=DHS&cid=198375&lid=45846&acd=12309198375458460&VEN3=813103911618984054

Just got another notification.  EVGA has "B stock" 1070 SC GAMING cards in stock for $399/ea, limit 4 per household:

https://www.evga.com/products/Product.aspx?pn=08G-P4-6173-RX

Hope this helps someone out there.  FYI I own 2 of these GPUs and have them OC'd, hashing ETH at 29.5 MH/sec.  They might do better than that: they're in a frankenstein rig with 2 other variants of 1070 cards and I haven't tried individual OC settings.

This is a steal right now!

[Sydewinder]

First thanks for your work putting this together. I'm loving it so far. I went ahead and added a few currencies such as mona hush and i forget what else but cant seem to get lyra2z algo to work. tried both versions of ccminer that are included but no dice.

Download the newest oneBash at the top of the OP; it has a MONA coin selection.

Tell me what pool you use for HUSH and I will add it to the next oneBash.

For hush i used this ands works great.

HUSH_WORKER="WORKERNAME"
HUSH_ADDRESS="USERNAME"
HUSH_POOL="zdash.suprnova.cc"
HUSH_PORT="4048"

#################


if [ $COIN == "HUSH" ]
then

if [ $EWBF_VERSION == "3_3" ]
then
HCD='/home/m1/zec/v3_3/miner'
fi

if [ $EWBF_VERSION == "3_4" ]
then
HCD='/home/m1/zec/v3_4/miner'
fi

HUSHADDR="$HUSH_ADDRESS.$HUSH_WORKER"
until $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $HUSH_POOL --user $HUSHADDR --pass z --port $HUSH_PORT;
   do
   echo "FAILURE; reinit in 5" >&2
   sleep 5
done
fi



Tried to add ZCoin using this but keep getting an error about unknown algo parameter or something of that nature:


ZCOIN_WORKER="WORKERNAME"
ZCOIN_ADDRESS="USERNAME"
ZCOIN_POOL="stratum+tcp://xzc.suprnova.cc:1569"


#############

if [ $COIN == "ZCOIN" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$ZCOIN_ADDRESS.$ZCOIN_WORKER"

until $HCD -a lyra2z -o $ZCOIN_POOL -u $ADDR -p x
   do
   echo "FAILURE; reinit in 5" >&2
   sleep 5
done

fi

[car1999]

Hi fullzero,
I followed this guild(https://bitcointalk.org/index.php?topic=1854250.msg19503300#msg19503300) to use SSH, it works well.
But I don't know how to exit the screen session and restart it. So I googled and found a stackoverflow thread https://stackoverflow.com/questions/1509677/kill-detached-screen-session, there are multiple methods, could you update your "official" way to the origin guide?

thanks.

[UberDaemon]

Hi fullzero,
I followed this guild(https://bitcointalk.org/index.php?topic=1854250.msg19503300#msg19503300) to use SSH, it works well.
But I don't know how to exit the screen session and restart it. So I googled and found a stackoverflow thread https://stackoverflow.com/questions/1509677/kill-detached-screen-session, there are multiple methods, could you update your "official" way to the origin guide?

thanks.

To detach from a screen (i.e. you want to close the SSH connection while mining continues afterwards) it's

Code:

CTRL + a + d

To reattach to a screen (resume connection) it's

Code:

screen -x [name you gave the screen session]  # once you've typed 3-4 characters hit the tab key and it will fill out the rest and save you some typing

If you can't remember what you named the session use:

Code:

screen -ls

If you're new to screen you may not know you can open a 2nd shell and switch back and forth (i.e. your miner is running on one shell and you open a 2nd to run nvidia-smi):

once in screen you create a 2nd shell (or 3rd, 4th, etc) with

Code:

CTRL + a + c

To switch back and forth use:

Code:

CTRL + a + n

[Funkyanimal]

I setup Groestcoin (GRS) in the onebash file and used ccminer using the groestl algo.   Is SGccminer the best miner to use? I see most pools recommend sgh-sgminer and was hoping someone could enlighten me if that is the same thing I have specified.   I'm currently mining GRS on miningpoolhub.  Thanks in advance, I am a a little new to the alt coin arena.

[tempgoga]

Hey fullzero, first i wanted to thank you for all your work, nvOC is pretty great, but i do have some questions,

i recently built a 7 x gigabyte gtx 1070 FE mining rig, running on an asus prime z270-a and i've encountered some problems,

First problem is with Teamviewer, on nvOC v15 i installed teamviewer and added it to startup applications and it worked just fine, but with nvOC v16 i'm having problems, enabling it in oneBash doesn't allow me to connect by itself, after the script enables the service.daemon i have to manually click the Teamviewer icon on the sidebar to be able to connect to the rig, and i want teamviewer to go live as soon as the rig is up.

adding teamviewer to startup application doesn't work on nvOC v16 since startup applications loads teamviewer and oneBash at the same time roughly, the script hasnt had the chance to initiate the teamviewer service.daemon and all you get is an error message telling you that the service.daemon isnt running when it attempts to open teamviewer..



Second problem, and this might actually be a problem with claymore, but commands like "-tt" and "-ttdcr" and most importantly "-tstop" dont work, i have no temp control other then setting the fans and hoping for the best, is there a way for me to at least shut everything down in case things overheat?



Last problem is that when i dual mine sometimes the whole system freezes, or at least slows down to a crawl, with nvOC v15 when this happened the hashrate would drop to 0 for GPU 0, GPUs 1-5 would be at 50% hashrate and GPU 6 would be at 25% hashrate, i'm not sure if this is due to me undervolting/overclocking too much but this only happens in dual mining, i got no error messages in the logs... i also cant find the logs in v16?

i run the GPUs at a pl of 120 and clocks of 200/1800, this works fine when i only mine ETH but i'm having problems in dual mining ETH/SIA



Thanks again..

[Tasbi]

Hello guys,

I read this, they say that can increase performance by 15 to 30% on a gtx 1060....

https://www.reddit.com/r/EtherMining/comments/6jjhob/ethereum_code_optimized_for_some_nvidian_cards/

https://github.com/Genoil/cpp-ethereum/pull/228#issuecomment-310918630

Is it true, anyone tried yet?

[Nexillus]

Hello guys,

I read this, they say that can increase performance by 15 to 30% on a gtx 1060....

https://www.reddit.com/r/EtherMining/comments/6jjhob/ethereum_code_optimized_for_some_nvidian_cards/

https://github.com/Genoil/cpp-ethereum/pull/228#issuecomment-310918630

Is it true, anyone tried yet?

I researched into it and from what people are reporting it is true. 1060 gets the best increase upwards of 15-30% (like you saw) Average hash from what people were reprtong was about 29-31MH/s for a 1060. while 1070 gets about 3-5% and 1080TI gets 2%

[tempgoga]

Hello guys,

I read this, they say that can increase performance by 15 to 30% on a gtx 1060....

https://www.reddit.com/r/EtherMining/comments/6jjhob/ethereum_code_optimized_for_some_nvidian_cards/

https://github.com/Genoil/cpp-ethereum/pull/228#issuecomment-310918630

Is it true, anyone tried yet?

I researched into it and from what people are reporting it is true. 1060 gets the best increase upwards of 15-30% (like you saw) Average hash from what people were reprtong was about 29-31MH/s for a 1060. while 1070 gets about 3-5% and 1080TI gets 2%

Thats insane.. 30Mh/s from a 1060? figures after i just bought 7 1070s, 1060 are considerably cheaper then 1070 in my country..

[OverEasy]

Sounds like we need to get Genoil implemented into nvOC

[f00ch0w]

Any way to add additional parameters for EWBF? Like --api so I can enable it?

[Emony-Dax]

I am at my wits end trying to get this to boot. I have managed to get it to boot a couple of times, but each time it does it freezes after failing to connect to EWBF(as I currently do not have a connection set up, I need to make some changes to make my wifi dongle work but cannot do this due to the issues) - following restarting it results in a kernel error. About 95% of the time after reflashing to attempt again it doesn't boot and I just get a blank screen after it attempts to boot into Ubuntu (no loading screen).

This happens with both OC and non-OC. Mostly attempting to get this to work on default settings moving forward.

I am using a MSI z170a SLI and 2x GTX 1060's (6gb) with a DVI monitor. Using a SanDisk Extreme 64GB USB stick.
Above 4G decoding is enabled and BIOS has been flashed to the latest 3.A version (issue occured before the flash too).

Has anyone encountered similar problems?

When Above 4G decoding is enabled it is normal to see a black screen while ubuntu is loading.

Maybe this will work:

Ensure the monitor is connected to the primary GPU ( the one in the 16x slot closest to the CPU )

Disconnect the USB or SSD/HHD from the rig.

Fully power off everything: including the PSU.

Press the power button several times to clear any remaining power in the mobo.

Turn the PSU powerswitch back to | "on".

power on (without the USB attached)

See if the bios posts; if you get nothing in 20 seconds; press ctrl + alt + del repeatedly until the system reboots.

Wait and see if the bios posts.

If the bios posts attach the USB key to a USB 2.0 port and press ctrl + alt + delete.


if it boots; stop the mining process before it starts mining:

then go to the top left and click the ubuntu button

type u

and click on software updater

run updates

reboot

Let me know if this works.

Thank you for the help on this.

I have now connected this to ethernet.

I've managed to get it to boot without 4G Encoding enabled, though the mining process won't start. Following this I saw your post, I re-enabled 4G Encoding and tried the steps listed.

BIOS posts, but the black screen is present after and it doesn't boot no matter how long I leave it on. Either that or it is not outputting display, but it seems to be the former since the mining process doesn't start (GPU fans don't go to 75%).

EDIT: I have got it working!!

I found that Newbie2017 encountered a similar issue.

I disabled onboard audio, switched PCI-E mode to Gen 1, and enabled Windows 10/8.1 support in the boot settings.

EDIT2: Froze up after 5 minutes of the miner running. GPU0 temp seemed to get quite high(80C) - might be this? Or perhaps that the USB 3.0 key was in a 2.0 port which is too slow for the OS?

EDIT3: Tried closing the mining process and installing updates, but it froze when installing updates.

[damNmad]

Hello miners...

First things first, I would like to thank 'fullzero' (infact hero ) for this fantastic job, can't thank him enough.

I've built my first RIG very recently, I would like to find the best OC settings and pool settings to get the best out of it, with the help of miners expertise.

I was getting really good speed on windows but for some reason it doesn't allow me run more than 3 GPU's (it was a trial version), but it was doing 20 MH per card from stock with claymore dual mining.

I had to switch back to Ubuntu but  the trouble is I'm only getting 18 MH on an average per card, I'm using claymore dual (ETC + PASC) with CUDA 8.x nvidia driver - 375.66, pulling 1044 watts from wall.
Temperatures : 65 - 73 C
Fans on Auto : 39 - 43

My config -

ASUS DUAL GTX 1060 - 8 GPU's
ASUS Z270P
8 GB RAM
2 x EVGA G2 750 Watts PSU units
8 x V6 Risers
120 GB SSD

Fellow miners using same cards, please share your Core, memory OC + fan + power settings. I would also like to know how to add multiple pools to the nvOC oneBash file.

Would also welcome suggestions about best combination cryptos for better ROI with my equipment.

Thanks in advance.

Regards,
damNmad

Glad you like nvOC  

Are these 3gb or 6gb 1060s?

If they are 3gb I would try these settings:

https://bitcointalk.org/index.php?topic=1854250.msg19703709#msg19703709

Thanks for your reply

I'm using 6GB 1060s.

What settings would you suggest?

I'm currently on

Core Clock  - 100
Mem Clock  - 800
Power Limit - 110 Watt

I'm getting
160 MH (20.xx per card) on average (6 hours) 1620 MH for PASC on average (6 hours) for 8 cards (definitely increased from my previous hash rate, thanks for that)

Any suggestions/improvements would be really appreciated.

I would bump up the mem Clock by 50 every 5 mins or so until you get a soft or hard crash then back off.

Sure I will try that.

BTW I have another question, currently in my bash file I have only added 1 pool, is there any way to add more pools (for eg ethermine has 2 eu pools, would like to add backup pool to send more shares)?

[OverEasy]

Loving this! What's the trick for RDP? I set it up on the Linux side but cannot connect RDP from my Windows machine.
Thanks

try this guide:

https://www.lifewire.com/setup-ubuntu-remote-desktop-4129666

Let me know if this guide is good or not.

I followed the guide but still no luck. So far the only thing that has worked has been TeamViewer but its so slow its not really usable.
Today I installed Xrdp and managed to get a desktop but not the running one! A completely different one.

I just can't understand why I can't make a simple Windows RDP connection to the nvOC Ubuntu box on my local network. The research and trail and error continues I guess...

[ATCkit]

So I've imaged my USB, set up onebash & plugged the USB into my rig. The monitor immediately showed " grub rescue".

Questions:
1. I assume this the process of converting the file from windows to linux- correct?

2. If so, this process has been running for 30 minutes. How long should it take?

[OverEasy]

Mine took seconds. Something is wrong

[xleejohnx]

Any way to add additional parameters for EWBF? Like --api so I can enable it?

Go down to the bottom of the onebash file and add it to the string for ewbf