[OS] nvOC easy-to-use Linux Nvidia Mining

[fk1]

I'm wondering how I can setup my rig to mine i.e. GPU1=ETH/SIA GPU2=MUSICOIN/PASCAL is it possible?

[1713969200]

1713969200

[citronick]

ASRock H110 PRO BTC+ and have confirmed that v0017 supports 13x GPUs out the box with no bios changes.[/b] 

As the Biostar 12x GPU mobo uses the same chipset I would expect it to be fully supported as well.

excellent - cant wait to get my 1070s on this board!

[Nexillus]

Had a rig today at work hard lockup and needed a hard reset. How would I pass the worker email for claymore or eth to get a notification?

Was down for about 8 hours

[pixelizedchaos]

Had a rig today at work hard lockup and needed a hard reset. How would I pass the worker email for claymore or eth to get a notification?

Was down for about 8 hours

With the new update that should help any resets, but I totally recommend getting the wemo. I often use it if i can't get into my rig remotely it's excellent for hard resetting plus it also gives you a remote power consumption monitor, smart plugs are pretty great if you get the right one.

[Nexillus]

Had a rig today at work hard lockup and needed a hard reset. How would I pass the worker email for claymore or eth to get a notification?

Was down for about 8 hours

With the new update that should help any resets, but I totally recommend getting the wemo. I often use it if i can't get into my rig remotely it's excellent for hard resetting plus it also gives you a remote power consumption monitor, smart plugs are pretty great if you get the right one.

Not a bad idea for a remote reset for the power, hummmm. I do like this but I still need a way to be notified when the miner goes down.

[Nexillus]

I just recalled that when using claymore you can use Ethminer remote manager along with it and just set it up on one of my comptuers to notify me.

Problem solved now. Now I have to look at the Wemo for remote power reset. That is kinda cool for a oh crap situation.

[_Parallax_]

I will release v0018 soon.  Currently you must reimage to upgrade; I will add an updater in a later version.

Hi fullzero, add please to v0018 a monitoring agent for zabbix.
Here https://pastebin.com/raw/pXDwWiS3 is the configuration file zabbix_agentd.conf

I created the necessary metrics for 10 GPUs.
The agent will send the metrics to the server with the IP Address 192.168.10.100
I'll try to add a customization guide.

Briefly: I take the Temrature and the hash from the Claymore
The power consumption of the GPU from the utility nvidia-smi

The result of the metrics is this:
curl -s http://localhost:3333 | sed '/GPU/!d; /Mh/!d;' | awk '{print $13}' | awk 'NR == 1'
curl -s http://localhost:3333 | sed '/Total/!d; /Speed/!d;' | awk '{print $6}' | awk 'NR == 3'
curl -s  http://localhost:3333 | awk '/t=/ {print $12}' | tr -d t=C | awk 'NR == 1'
nvidia-smi | grep % | awk '{print $5}' | tr -d W | awk 'NR==4'


My dashboard: https://photouploads.com/image/Bv1


PS: You need to install the latest package zabbix_agentd 3.2.6

wget http://repo.zabbix.com/zabbix/3.2/ubuntu/pool/main/z/zabbix-release/zabbix-release_3.2-1+xenial_all.deb
sudo dpkg -i zabbix-release_3.2-1+xenial_all.deb

sudo apt-get update
sudo apt-get install zabbix-agent

Thank you, and sorry for my english.

[jlbaseball11]

I just found out about Egifter.com.  You can use Bitcoin to buy gift cards to a bunch of places like Amazon, Best Buy, Target...  Its nice to be able to spend Bitcoin easier.  I just bought a Wemo on Amazon like that.  Thanks for the idea.

[fullzero]

v0018 is up on Google Drive see the OP for the Link:

I will upload to MEGA shortly.


Lots of changes I will update the OP shortly.


the SHA256 hash is:

Code:

9c81574cdd515103cc7a331c3bfdbe5dd94ef10574c227ec9b81cb581a1049f4

If you are using windows:

open a cmd prompt:

click the start button and type: 

Code:

cmd

then press enter:

type the following:

Code:

CertUtil -hashfile PATH_TO_IMAGE_ZIP_HERE SHA256

and press enter

if the result is:

Code:

9c81574cdd515103cc7a331c3bfdbe5dd94ef10574c227ec9b81cb581a1049f4

then the ZIP_containing_the_image is good

Note: you can find the file path by right clicking the zip and selecting properties


If you are using linux:

open a terminal and enter the following:

Code:

sha256sum 'PATH_TO_IMAGE_ZIP_HERE'

and press enter

if the result is:

Code:

9c81574cdd515103cc7a331c3bfdbe5dd94ef10574c227ec9b81cb581a1049f4

then the ZIP_containing_the_image is good

Note: you can also type sha256sum then drag the zip to the terminal window to add the absolute path without typing it.


If you are using OSX:

open a terminal and enter the following:

Code:

shasum -a 256 'PATH_TO_IMAGE_ZIP_HERE'

and press enter

if the result is:

Code:

9c81574cdd515103cc7a331c3bfdbe5dd94ef10574c227ec9b81cb581a1049f4

then the ZIP_containing_the_image is good

[pixelizedchaos]

Had a rig today at work hard lockup and needed a hard reset. How would I pass the worker email for claymore or eth to get a notification?

Was down for about 8 hours

With the new update that should help any resets, but I totally recommend getting the wemo. I often use it if i can't get into my rig remotely it's excellent for hard resetting plus it also gives you a remote power consumption monitor, smart plugs are pretty great if you get the right one.

Not a bad idea for a remote reset for the power, hummmm. I do like this but I still need a way to be notified when the miner goes down.

Yeap it's pretty fantastic, you can also set it up with IFTTT so if you notice the power consumption dropping over several hours, you can set up rules to reset it, its kind of a hardcore solution to a simple problem esp if you use the other software notifiers.

[fullzero]

Can you add SIBCOIN ?

Thanks!

As far as I know that is X11, not in nvOC. Might be better to use an ASIC for that?

Add, pls, SIB (Sibcoin) and CHC (Chaincoin) support.

THNX

ccminer supports X11; but Maxximus007 is right; most likely X11 is not worth GPU mining: I will look into these and add them to the list.  I will be releasing a new 1bash reasonably soon with more COIN selections.

[fullzero]

Thank you.

Can you add an additional condition regarding GPU temp?

if (CURRENT_TEMP == TARGET_TEMP and CURRENT_FAN_SPEED == MAX) then POWER_LIMIT = POWER_LIMIT-10% ?

Or something similar, do prevent GPU's from crashing it they reach max temperature and fans can no longer catch up. I realize that it involves multiple variables not just the simple condition above, but should be a good start.

P.S. Are you planing to release v18 today?

Something similar will be working in V0018 I believe.

Maxximus007 implemented this in his: Maxximus007_AUTO_TEMPERATURE_CONTROL 

[fullzero]

Does anyone know why all shares are being rejected because of "low difficulty share?"  It only happens with DMD and ZCOIN.  Every other coin works fine.  I've tried different pools and oc settings with no change.

Sometimes a pool will take an additional argument for default difficulty.  Check with the pool; an dif this is the case look up the code block for the coin section in 1bash (ctrl + f) then type the COIN name.

[fullzero]

I'm wondering how I can setup my rig to mine i.e. GPU1=ETH/SIA GPU2=MUSICOIN/PASCAL is it possible?

Technically yes; although this is the hardest to keep stable. 

Each distinct algo on the same rig will exponentially decrease stability. 

Requires extreme care and a specific system to implement well; ie it is not portable: and therefore not implementable for nvOC.

[fullzero]

I just recalled that when using claymore you can use Ethminer remote manager along with it and just set it up on one of my comptuers to notify me.

Problem solved now. Now I have to look at the Wemo for remote power reset. That is kinda cool for a oh crap situation.

There are so many ways and tools.  Adding a hard fault solution for v0018 takes it full circle.

[fullzero]

I will release v0018 soon.  Currently you must reimage to upgrade; I will add an updater in a later version.

Hi fullzero, add please to v0018 a monitoring agent for zabbix.
Here https://pastebin.com/raw/pXDwWiS3 is the configuration file zabbix_agentd.conf

I created the necessary metrics for 10 GPUs.
The agent will send the metrics to the server with the IP Address 192.168.10.100
I'll try to add a customization guide.

Briefly: I take the Temrature and the hash from the Claymore
The power consumption of the GPU from the utility nvidia-smi

The result of the metrics is this:
curl -s http://localhost:3333 | sed '/GPU/!d; /Mh/!d;' | awk '{print $13}' | awk 'NR == 1'
curl -s http://localhost:3333 | sed '/Total/!d; /Speed/!d;' | awk '{print $6}' | awk 'NR == 3'
curl -s  http://localhost:3333 | awk '/t=/ {print $12}' | tr -d t=C | awk 'NR == 1'
nvidia-smi | grep % | awk '{print $5}' | tr -d W | awk 'NR==4'


My dashboard: https://photouploads.com/image/Bv1


PS: You need to install the latest package zabbix_agentd 3.2.6

wget http://repo.zabbix.com/zabbix/3.2/ubuntu/pool/main/z/zabbix-release/zabbix-release_3.2-1+xenial_all.deb
sudo dpkg -i zabbix-release_3.2-1+xenial_all.deb

sudo apt-get update
sudo apt-get install zabbix-agent

Thank you, and sorry for my english.

Was already 50% complete with v0018 upload when I saw this.  Can you give me the link to the zabbix source code?

This looks interesting.

[fullzero]

I just found out about Egifter.com.  You can use Bitcoin to buy gift cards to a bunch of places like Amazon, Best Buy, Target...  Its nice to be able to spend Bitcoin easier.  I just bought a Wemo on Amazon like that.  Thanks for the idea.

Egifter is good; I recommend getting a bitpay debit card.

[_Parallax_]

I will release v0018 soon.  Currently you must reimage to upgrade; I will add an updater in a later version.

Hi fullzero, add please to v0018 a monitoring agent for zabbix.
Here https://pastebin.com/raw/pXDwWiS3 is the configuration file zabbix_agentd.conf

I created the necessary metrics for 10 GPUs.
The agent will send the metrics to the server with the IP Address 192.168.10.100
I'll try to add a customization guide.

Briefly: I take the Temrature and the hash from the Claymore
The power consumption of the GPU from the utility nvidia-smi

The result of the metrics is this:
curl -s http://localhost:3333 | sed '/GPU/!d; /Mh/!d;' | awk '{print $13}' | awk 'NR == 1'
curl -s http://localhost:3333 | sed '/Total/!d; /Speed/!d;' | awk '{print $6}' | awk 'NR == 3'
curl -s  http://localhost:3333 | awk '/t=/ {print $12}' | tr -d t=C | awk 'NR == 1'
nvidia-smi | grep % | awk '{print $5}' | tr -d W | awk 'NR==4'


My dashboard: https://photouploads.com/image/Bv1


PS: You need to install the latest package zabbix_agentd 3.2.6

wget http://repo.zabbix.com/zabbix/3.2/ubuntu/pool/main/z/zabbix-release/zabbix-release_3.2-1+xenial_all.deb
sudo dpkg -i zabbix-release_3.2-1+xenial_all.deb

sudo apt-get update
sudo apt-get install zabbix-agent

Thank you, and sorry for my english.

Was already 50% complete with v0018 upload when I saw this.  Can you give me the link to the zabbix source code?

This looks interesting.

https://www.zabbix.com/download
https://github.com/zabbix

[jotun]

I can't get ethermine.org to accept my shares for ETH/ETC, nanopool works ok tho. any help is greatly appreciated.

Code:

  ℹ  04:00:58|stratum  Connecting to stratum server eu1.ethermine.org:14444
  ℹ  04:00:59|stratum  Connected to stratum server eu1.ethermine.org : 14444
  ℹ  04:00:59|stratum  Subscribed to stratum server
  ✘  04:00:59|stratum  Read response failed: End of file
  ℹ  04:00:59|stratum  Reconnecting in 3 seconds...
  ℹ  04:01:02|stratum  Connecting to stratum server eu1.ethermine.org:14444
Could not resolve hosteu1.ethermine.org:14444, Operation canceled  ℹ  04:01:02|stratum  Reconnecting in 3 seconds...

onebash settings:

Code:

COIN="ETC"
USE_ENVIRONMENTAL_VARIBLES="YES"   #YES  NO
ETHERMINEdotORG="YES"
GENOILorCLAYMORE="GENOIL"  # choose GENOIL  or  CLAYMORE
ETC_WORKER="$IP_AS_WORKER"
ETC_ADDRESS="0x23a3d73843ee4fef1702c5d6ce78e43d960f4d79"
ETC_POOL="eu1.ethermine.org:14444"
ETC_EXTENTION_ARGUMENTS=""    # add any additional claymore arguments desired here

[fk1]

I'm wondering how I can setup my rig to mine i.e. GPU1=ETH/SIA GPU2=MUSICOIN/PASCAL is it possible?

Technically yes; although this is the hardest to keep stable.  

Each distinct algo on the same rig will exponentially decrease stability.  

Requires extreme care and a specific system to implement well; ie it is not portable: and therefore not implementable for nvOC.

Is this possible to just create a second bash file, set up card indexes by algo-params for each and start them in different screen sessions?

I'd like to try. On windows I did mine different coins with different cards from same rig and that was not a problem.