[OS] nvOC easy-to-use Linux Nvidia Mining

[car1999]

i tried to fix p106 overclocking issues but failed, don't know how does nvOC0018 handle the /etc/X11/xorg.conf, I run

Code:

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

and
 reboot, then the changes of xrog.conf were lost.

[1713499826]

1713499826

[1713499826]

1713499826

[1713499826]

1713499826

[JayneL]

my rig suddenly stop due to no disk space, but im using a 500gb hdd with only NVOC 18 installed, how can i manage to fix these as i cant delete anything coz of no permission, i didn't download anything.

thanks

God bless

[JayneL]

this doesn't solve my problem...my rig now not working properly please anyone?

Hi,
I have Lexar S75 32gb. After i installed 0018 im getting message "low disk space" I reflashed usb many times but error comes again and again

try this 1liner from _Parralax_:

Code:

sudo apt-get purge $(dpkg -l linux-{image,headers}-"[0-9]*" | awk '/ii/{print $2}' | grep -ve "$(uname -r | sed -r 's/-[a-z]+//')")

[car1999]

this doesn't solve my problem...my rig now not working properly please anyone?

Hi,
I have Lexar S75 32gb. After i installed 0018 im getting message "low disk space" I reflashed usb many times but error comes again and again

try this 1liner from _Parralax_:

Code:

sudo apt-get purge $(dpkg -l linux-{image,headers}-"[0-9]*" | awk '/ii/{print $2}' | grep -ve "$(uname -r | sed -r 's/-[a-z]+//')")

check the first post  in  page  114,

[lards]

I have 6x Zotac Mini Gtx 1060 6Gb. I get 19mh stock in dual ETH+DCR.
If I overclock it with your suggested settings: cc 150 mc 900 I get 21.5mh .
But if I try the same settings with msi afterburner in Windows, I get 23.5mh.
Why is this happening?

I believe that Linux and Windows OC settings vary and this means that in Linux your OC settings aren't the same as if you put cc150 and mc 900 in Windows, I guess in linux you can do higher clocks and still achieve a stable system and same hashrate as windows.

[vola1977]

Hi
I have  matherbord  ASUS PRIME Z270-P.  After startup the processor was loaded to 100%
I wanted to reboot the first time. After this the system no longer booted. Tell me what to write in order to display the window maining  program.

Help please

[Bibi187]

I have 6x Zotac Mini Gtx 1060 6Gb. I get 19mh stock in dual ETH+DCR.
If I overclock it with your suggested settings: cc 150 mc 900 I get 21.5mh .
But if I try the same settings with msi afterburner in Windows, I get 23.5mh.
Why is this happening?

I believe that Linux and Windows OC settings vary and this means that in Linux your OC settings aren't the same as if you put cc150 and mc 900 in Windows, I guess in linux you can do higher clocks and still achieve a stable system and same hashrate as windows.

U are right, on linux system, the value of OC is a bit different.
CoreClock is the same for linux and windows     100 = 100
For MemClock is another story, on window u set the MemClock directly in counterpart in linux u set the MemoryTransferRateOffset, as basic u have to double value cause

MemClock = MemoryTransferRateOffset / 2

So when u want to push your MemClock at +800, u have to set MemoryTransferRateOffset +1600

[JayneL]

this doesn't solve my problem...my rig now not working properly please anyone?

Hi,
I have Lexar S75 32gb. After i installed 0018 im getting message "low disk space" I reflashed usb many times but error comes again and again

try this 1liner from _Parralax_:

Code:

sudo apt-get purge $(dpkg -l linux-{image,headers}-"[0-9]*" | awk '/ii/{print $2}' | grep -ve "$(uname -r | sed -r 's/-[a-z]+//')")

check the first post  in  page  114,

Still cant make it to work coz i dont have any disk space.. 0 disk space so i cant install the package need for the script now reformatting new drive

[Bibi187]

Hi
I have  matherbord  ASUS PRIME Z270-P.  After startup the processor was loaded to 100%
I wanted to reboot the first time. After this the system no longer booted. Tell me what to write in order to display the window maining  program.

Help please

Hi, if u went a monitoring access on your rig, u have to modify 1bash

LOCALorREMOTE="LOCAL"       # LOCAL  or  REMOTE

Plug DVI/HDMI on the gpu:0 ( first x16 socket )

[Nexillus]

this doesn't solve my problem...my rig now not working properly please anyone?

Hi,
I have Lexar S75 32gb. After i installed 0018 im getting message "low disk space" I reflashed usb many times but error comes again and again

try this 1liner from _Parralax_:

Code:

sudo apt-get purge $(dpkg -l linux-{image,headers}-"[0-9]*" | awk '/ii/{print $2}' | grep -ve "$(uname -r | sed -r 's/-[a-z]+//')")

check the first post  in  page  114,

Still cant make it to work coz i dont have any disk space.. 0 disk space so i cant install the package need for the script now reformatting new drive

He was talking about extending the partition using gparted then you can run the script.

[gs777]

Just in case someone wondering
my rig 10xGTX1070, PSU 2xEVGA G2 1000W, pl130 cc150 mc360 nvOC v0018 latest,
Maximus temp control auto - 70C, SSH/SRR/Team Viewer - disabled
works good

are you using the biostar mb?

No my MoBo is ASRock H110 Pro BTC+
and I've set up LOCALorREMOTE to "LOCAL" as well

[fullzero]

what PSU do you guys use to supply for the Biostar tb250 12x? anyone using server psu and pc psu? or ...? i'm stuck on this

Either use 2x atx PSUs with a PSU joiner or use a large server PSU with a pico for the mobo power ports.

[fullzero]

Is there a command to see the MH per GPU?

not in genoil / switch to claymore if seeing this metric is important to you

[fullzero]

i tried to fix p106 overclocking issues but failed, don't know how does nvOC0018 handle the /etc/X11/xorg.conf, I run

Code:

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

and
 reboot, then the changes of xrog.conf were lost.

this is not the problem with the mining GPUs and the v0018 xorg.conf

[fullzero]

this doesn't solve my problem...my rig now not working properly please anyone?

Hi,
I have Lexar S75 32gb. After i installed 0018 im getting message "low disk space" I reflashed usb many times but error comes again and again

try this 1liner from _Parralax_:

Code:

sudo apt-get purge $(dpkg -l linux-{image,headers}-"[0-9]*" | awk '/ii/{print $2}' | grep -ve "$(uname -r | sed -r 's/-[a-z]+//')")

check the first post  in  page  114,

It may be due to soft pcie crash logs:  see this post:

https://bitcointalk.org/index.php?topic=1854250.msg20585140#msg20585140

[fullzero]

I have 6x Zotac Mini Gtx 1060 6Gb. I get 19mh stock in dual ETH+DCR.
If I overclock it with your suggested settings: cc 150 mc 900 I get 21.5mh .
But if I try the same settings with msi afterburner in Windows, I get 23.5mh.
Why is this happening?

I believe that Linux and Windows OC settings vary and this means that in Linux your OC settings aren't the same as if you put cc150 and mc 900 in Windows, I guess in linux you can do higher clocks and still achieve a stable system and same hashrate as windows.

powerlimit and OC curve are different in Linux

for 1060s try

powerlimit of 120

cc 100

mc 1200 ( and keep increasing by 100 until you get a soft crash)

[fogcity]

Hey all --

According to my calculations when running V0018 for eth only on Claymore 9.7 I get ~ 21.6 shares/hour from each of my 1070 GPUs.  If I run Genoil instead of Claymore, I get ~ 20.9 shares/hour from each of my 1070 GPUs... so about a half a share more per hour from each of my GPUs on Claymore.

I was wondering -- are my results typical, or are all people's rigs unique

Fogcity

[Bibi187]

Hey all --

According to my calculations when running V0018 for eth only on Claymore 9.7 I get ~ 21.6 shares/hour from each of my 1070 GPUs.  If I run Genoil instead of Claymore, I get ~ 20.9 shares/hour from each of my 1070 GPUs... so about a half a share more per hour from each of my GPUs on Claymore.

I was wondering -- are my results typical, or are all people's rigs unique

Fogcity

Hi, do u run this test for 24h ? On pool u have a luck variable, so sometime u get more or less.
Long time dont do solo ETH but if i remember right, genoil is faster vs claymore and genoil have no dev fee.

[car1999]

Is there a command to see the MH per GPU?

not in genoil / switch to claymore if seeing this metric is important to you

this feature has been merged, we can use it now:
https://github.com/ethereum-mining/ethminer/pull/225

[jlbaseball11]

I'm trying to mine ZCOIN on Mining Pool Hub. I keep getting "reject reason: low difficulty share of ________". Is there any way to fix this?

Thanks so much!

in the 1bash file, scroll down 2/3 of the way down and find this part and add a z at the end of the algo type:
if [ $COIN == "ZCOIN" ]
then
HCD='/home/m1/TPccminer/ccminer'
ADDR="$ZCOIN_ADDRESS.$ZCOIN_WORKER"

until $HCD -a lyra2z -o $ZCOIN_POOL -u $ADDR -p x
   do
   echo "FAILURE; reinit in 5" >&2
   sleep 5
done
fi