papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
October 18, 2017, 04:09:36 PM |
|
Hey guys is there any way to access the status web pages from outside the miner's network?
Also the papampi alert telegram type does not send me telegram messages. The BaliMiner one does though. Is there any way to fix this?
You should forward port 80 to your rig ip. If you have many rigs you can forward different ports for each rig for example in your router forward port 10180 to port 80 for 192.168.1.101 and forward port 10280 to port 80 for 192.168.1.102 Then open them by : http://YOUR_EXTERNAL_IP:10180/cgi-bin/minerinfoFor telegram Please set it to papampi then execute a telegram by see if it gives any errors Thanks for the port forwarding info. Unfortunately when I try to run telegram manual I get this error: m1@m1-desktop:~$ sudo bash telegram error: process ID list syntax error This is on NVocv v0019-1.3 Then you get no message at all, or some info are empty ? Also sudo not needed to send telegram message Open and edit telegram file In papampi section Change MINER_UP_TIME to : MINER_UP_TIME=$(ps -p `pgrep miner` -o etime | grep -v ELAPSED)
I just changed that line in the telegram file. Now when I type There is no error but there is no output to the console at all. There should be no output in console, You should just get your telegram message, if you set it right
|
|
|
|
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
fearherbs1
Newbie
Offline
Activity: 8
Merit: 0
|
|
October 18, 2017, 04:25:24 PM |
|
Hey guys is there any way to access the status web pages from outside the miner's network?
Also the papampi alert telegram type does not send me telegram messages. The BaliMiner one does though. Is there any way to fix this?
You should forward port 80 to your rig ip. If you have many rigs you can forward different ports for each rig for example in your router forward port 10180 to port 80 for 192.168.1.101 and forward port 10280 to port 80 for 192.168.1.102 Then open them by : http://YOUR_EXTERNAL_IP:10180/cgi-bin/minerinfoFor telegram Please set it to papampi then execute a telegram by see if it gives any errors Thanks for the port forwarding info. Unfortunately when I try to run telegram manual I get this error: m1@m1-desktop:~$ sudo bash telegram error: process ID list syntax error This is on NVocv v0019-1.3 Then you get no message at all, or some info are empty ? Also sudo not needed to send telegram message Open and edit telegram file In papampi section Change MINER_UP_TIME to : MINER_UP_TIME=$(ps -p `pgrep miner` -o etime | grep -v ELAPSED)
I just changed that line in the telegram file. Now when I type There is no error but there is no output to the console at all. There should be no output in console, You should just get your telegram message, if you set it right Thanks for the fast reply, I double checked my settings in 1bash and everything seems good. I do not receive the alert though. I don't know if this has anything to do with it, but the webpage is missing some info: https://imgur.com/a/R5468
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
October 18, 2017, 05:04:37 PM |
|
Hey guys is there any way to access the status web pages from outside the miner's network?
Also the papampi alert telegram type does not send me telegram messages. The BaliMiner one does though. Is there any way to fix this?
You should forward port 80 to your rig ip. If you have many rigs you can forward different ports for each rig for example in your router forward port 10180 to port 80 for 192.168.1.101 and forward port 10280 to port 80 for 192.168.1.102 Then open them by : http://YOUR_EXTERNAL_IP:10180/cgi-bin/minerinfoFor telegram Please set it to papampi then execute a telegram by see if it gives any errors Thanks for the port forwarding info. Unfortunately when I try to run telegram manual I get this error: m1@m1-desktop:~$ sudo bash telegram error: process ID list syntax error This is on NVocv v0019-1.3 Then you get no message at all, or some info are empty ? Also sudo not needed to send telegram message Open and edit telegram file In papampi section Change MINER_UP_TIME to : MINER_UP_TIME=$(ps -p `pgrep miner` -o etime | grep -v ELAPSED)
I just changed that line in the telegram file. Now when I type There is no error but there is no output to the console at all. There should be no output in console, You should just get your telegram message, if you set it right Thanks for the fast reply, I double checked my settings in 1bash and everything seems good. I do not receive the alert though. I don't know if this has anything to do with it, but the webpage is missing some info: Oh, I remembered There is an argument missing in 3main screen commands Open 3main with gedit and replace all with: After this change you can see miner, wdog and temp logs with this command too :
|
|
|
|
leenoox
|
|
October 18, 2017, 05:38:45 PM |
|
Hello every one, Hope you're mining every damn coin in the blockchain I'm new to mining and just finish my first rig with Z270-A mobs and 6 1080ti GPUs and start mining MONA with nvOC v0019-1.3, I came cross few issues -After image USB key Try to modified Bash1 & 3main files from Linux OS, USB key image become Unbootable & Bash1 file is gone?!! -OS some time get hang and after hard reboot, USB key image become Unbootable & Bash1 file is gone?!! -Miner started to mine MONA and after 10 mints become unstable and keep crash(I use ASCCminer & it's registered in suprnova pool)?!! Any thing can help to solve this issues I'm still having annoying broken Operating System @ USB key after few run or system reboot and get this error msg' Any idea how to solve this issue? USB Key (SanDisk Ultra Fit 64GB, I have 2 and both give same issue) Maybe I have to tray different USB Key brand and see how it's go It seems your USB stick doesn't play well with linux. Try another model or brand.
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
October 18, 2017, 05:44:37 PM |
|
Hello every one, Hope you're mining every damn coin in the blockchain I'm new to mining and just finish my first rig with Z270-A mobs and 6 1080ti GPUs and start mining MONA with nvOC v0019-1.3, I came cross few issues -After image USB key Try to modified Bash1 & 3main files from Linux OS, USB key image become Unbootable & Bash1 file is gone?!! -OS some time get hang and after hard reboot, USB key image become Unbootable & Bash1 file is gone?!! -Miner started to mine MONA and after 10 mints become unstable and keep crash(I use ASCCminer & it's registered in suprnova pool)?!! Any thing can help to solve this issues I'm still having annoying broken Operating System @ USB key after few run or system reboot and get this error msg' Any idea how to solve this issue? USB Key (SanDisk Ultra Fit 64GB, I have 2 and both give same issue) Maybe I have to tray different USB Key brand and see how it's go It seems your USB stick doesn't play well with linux. Try another model or brand. Do yourself and your rig a big favor and get a 50$ SSD Bigger, Faster, More stable ,....
|
|
|
|
CryptAtomeTrader44
Full Member
Offline
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
|
|
October 18, 2017, 06:15:11 PM Last edit: October 18, 2017, 08:37:46 PM by CryptAtomeTrader44 |
|
Ethereum mining is getting profitable again after the Byzantium hard-fork update. Before the update my estimated monthly earnings on ethermine were 5.6 ETH but after the update it keeps rising. It estimates 7.85 ETH and hasn't been even 24 hours yet so the estimation curve keeps rising until it gets clear curve... I beleive it will surpass 8 ETH/month with my 1.35 GH/s.
The dificulty dropped a lot and it is still dropping, the block time went down from 30 to 15 seconds. Even though the block reward went down from 5 to 3 ETH, when you consider lower difficulty and block times it is way more profitable now.
If you haven't switched back to mining ETH yet, don't delay any longer, take advantage before others realize it and difficulty sky-rocket again.
Yes i just saw what you mean in looking here : https://www.coinwarz.com/difficulty-charts/ethereum-difficulty-chartit is quite incredible but the difficulty of mining has been divided by two very brutally according to this graph. We'll see if it goes back as fast as you think, but I doubt it. And What exactly is this Byzantium fork? sorry but I did not follow everything, and I would like the version of the experienced people who mined on this forum.
|
|
|
|
|
HyPyk
Newbie
Offline
Activity: 27
Merit: 0
|
|
October 18, 2017, 06:43:00 PM |
|
Telegram with some detailed info for ewbf First you need to edit 3main to enable ewbf log, find the ewbf line and make it like this: screen -dmS miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZEC_POOL --user $ZECADDR --pass z --port $ZEC_PORT --log 2 --logfile ewbf.log;
Also its better to add ewbf.log to clear_logs file so it get cleared on every boot and dont give you old info on boot time. Here is what I'm using for my telegram, #!/bin/bash # Telegram Info Script # By BaliMiner et al... # for nvOC by fullzero # ref: http://bernaerts.dyndns.org/linux/75-debian/351-debian-send-telegram-notification #
source ~/1bash
CHATID=$TELEGRAM_CHATID APIKEY=$TELEGRAM_APIKEY HASH_RATE=$(tail -n 30 ewbf.log |grep GPU0:| tail -n 1) TOTAL_HASH_RATE=$(tail -n 30 ewbf.log |grep Total| tail -n 1) SYSTEM_BOOT_TIME=$(uptime -s) SYSTEM_UP_TIME=$(uptime -p) GPU_COUNT=$(nvidia-smi -L | tail -n 1| cut -c 5 |awk '{ SUM += $1+1} ; { print SUM }') MINER_UP_TIME=$(ps -p `pgrep miner` -o etime | grep -v ELAPSED) GPU_UTILIZATIONS=$(nvidia-smi --query-gpu=utilization.gpu --format=csv,noheader,nounits) TEMP=$(/usr/bin/nvidia-smi --query-gpu=temperature.gpu --format=csv,noheader) PD=$(/usr/bin/nvidia-smi --query-gpu=power.draw --format=csv,noheader) FAN=$(/usr/bin/nvidia-smi --query-gpu=fan.speed --format=csv,noheader) LF=$'\n' MSG=" Worker: $WORKERNAME System Boot Time: $SYSTEM_BOOT_TIME System Up Time: $SYSTEM_UP_TIME Miner Uptime: $MINER_UP_TIME GPU Count: $GPU_COUNT $TOTAL_HASH_RATE $LF Hash Rate: $HASH_RATE $LF GPU Utilizations: $GPU_UTILIZATIONS $LF GPU Temps: $TEMP $LF GPU Fan Speeds: $FAN $LF Power Draws: $PD"
/usr/bin/curl -s -X POST --output /dev/null https://api.telegram.org/bot${APIKEY}/sendMessage -d "text=${MSG}" -d chat_id=${CHATID}
You can test your telegram by runnung telegram command in guake or from ssh, no need to wait for it Edit it to your liking and share with us. Hi, I receive telegram alerts, but some fields are blank, for example miner uptime Temp, Fan, Power how to fix? thanks
|
|
|
|
reem_aaxxll
Newbie
Offline
Activity: 7
Merit: 0
|
|
October 18, 2017, 07:07:33 PM |
|
Hello every one, Hope you're mining every damn coin in the blockchain I'm new to mining and just finish my first rig with Z270-A mobs and 6 1080ti GPUs and start mining MONA with nvOC v0019-1.3, I came cross few issues -After image USB key Try to modified Bash1 & 3main files from Linux OS, USB key image become Unbootable & Bash1 file is gone?!! -OS some time get hang and after hard reboot, USB key image become Unbootable & Bash1 file is gone?!! -Miner started to mine MONA and after 10 mints become unstable and keep crash(I use ASCCminer & it's registered in suprnova pool)?!! Any thing can help to solve this issues I'm still having annoying broken Operating System @ USB key after few run or system reboot and get this error msg' http://b.up-00.com/2017/10/150831609350471.jpg Any idea how to solve this issue? USB Key (SanDisk Ultra Fit 64GB, I have 2 and both give same issue) Maybe I have to tray different USB Key brand and see how it's go It seems your USB stick doesn't play well with linux. Try another model or brand. Thanks leenoox, I just got new one & I'll give it a go hope it solve this ridiculous issue. Do yourself and your rig a big favor and get a 50$ SSD Bigger, Faster, More stable ,....
Thanks papampi, I already have 120GB SSD but to image it with nvOC seems to much thing to do, if there an easy way to dump the image directly from the USB key to SSD that will be great.
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
October 18, 2017, 07:17:32 PM |
|
Telegram with some detailed info for ewbf First you need to edit 3main to enable ewbf log, find the ewbf line and make it like this: screen -dmS miner $HCD --eexit 3 --fee $EWBF_PERCENT --pec --server $ZEC_POOL --user $ZECADDR --pass z --port $ZEC_PORT --log 2 --logfile ewbf.log;
Also its better to add ewbf.log to clear_logs file so it get cleared on every boot and dont give you old info on boot time. Here is what I'm using for my telegram, #!/bin/bash # Telegram Info Script # By BaliMiner et al... # for nvOC by fullzero # ref: http://bernaerts.dyndns.org/linux/75-debian/351-debian-send-telegram-notification #
source ~/1bash
CHATID=$TELEGRAM_CHATID APIKEY=$TELEGRAM_APIKEY HASH_RATE=$(tail -n 30 ewbf.log |grep GPU0:| tail -n 1) TOTAL_HASH_RATE=$(tail -n 30 ewbf.log |grep Total| tail -n 1) SYSTEM_BOOT_TIME=$(uptime -s) SYSTEM_UP_TIME=$(uptime -p) GPU_COUNT=$(nvidia-smi -L | tail -n 1| cut -c 5 |awk '{ SUM += $1+1} ; { print SUM }') MINER_UP_TIME=$(ps -p `pgrep miner` -o etime | grep -v ELAPSED) GPU_UTILIZATIONS=$(nvidia-smi --query-gpu=utilization.gpu --format=csv,noheader,nounits) TEMP=$(/usr/bin/nvidia-smi --query-gpu=temperature.gpu --format=csv,noheader) PD=$(/usr/bin/nvidia-smi --query-gpu=power.draw --format=csv,noheader) FAN=$(/usr/bin/nvidia-smi --query-gpu=fan.speed --format=csv,noheader) LF=$'\n' MSG=" Worker: $WORKERNAME System Boot Time: $SYSTEM_BOOT_TIME System Up Time: $SYSTEM_UP_TIME Miner Uptime: $MINER_UP_TIME GPU Count: $GPU_COUNT $TOTAL_HASH_RATE $LF Hash Rate: $HASH_RATE $LF GPU Utilizations: $GPU_UTILIZATIONS $LF GPU Temps: $TEMP $LF GPU Fan Speeds: $FAN $LF Power Draws: $PD"
/usr/bin/curl -s -X POST --output /dev/null https://api.telegram.org/bot${APIKEY}/sendMessage -d "text=${MSG}" -d chat_id=${CHATID}
You can test your telegram by runnung telegram command in guake or from ssh, no need to wait for it Edit it to your liking and share with us. Hi, I receive telegram alerts, but some fields are blank, for example miner uptime Temp, Fan, Power how to fix? thanks Are you on 19-1.3 ? If so open telegram file and in papampi section change MINER_UP_TIME to this : MINER_UP_TIME=$(ps -p `pgrep miner` -o etime | grep -v ELAPSED)
For Miner info and Temp, Fan, Power in web stat and telegram there is an argument missing in 3main screen commands Open 3main with gedit and replace all with: After this change you can see miner, wdog and temp logs with this command too
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
October 18, 2017, 07:29:32 PM |
|
Hello every one, Hope you're mining every damn coin in the blockchain I'm new to mining and just finish my first rig with Z270-A mobs and 6 1080ti GPUs and start mining MONA with nvOC v0019-1.3, I came cross few issues -After image USB key Try to modified Bash1 & 3main files from Linux OS, USB key image become Unbootable & Bash1 file is gone?!! -OS some time get hang and after hard reboot, USB key image become Unbootable & Bash1 file is gone?!! -Miner started to mine MONA and after 10 mints become unstable and keep crash(I use ASCCminer & it's registered in suprnova pool)?!! Any thing can help to solve this issues I'm still having annoying broken Operating System @ USB key after few run or system reboot and get this error msg' Any idea how to solve this issue? USB Key (SanDisk Ultra Fit 64GB, I have 2 and both give same issue) Maybe I have to tray different USB Key brand and see how it's go It seems your USB stick doesn't play well with linux. Try another model or brand. Thanks leenoox, I just got new one & I'll give it a go hope it solve this ridiculous issue. Do yourself and your rig a big favor and get a 50$ SSD Bigger, Faster, More stable ,....
Thanks papampi, I already have 120GB SSD but to image it with nvOC seems to much thing to do, if there an easy way to dump the image directly from the USB key to SSD that will be great. You can easily do it Just fire up HDD Raw CopyIn select source chose your USB In destination choose your SSD But since your USB looks corrupted it may not goes well If It does you can expand it after boot to nvOC with Gparted, If it doesnt copy the downloaded image to your SSD with HDD Raw Copy tool Then Have a look at my how to enable swap and expand drive with Gparted HERE
|
|
|
|
HyPyk
Newbie
Offline
Activity: 27
Merit: 0
|
|
October 18, 2017, 07:47:53 PM |
|
Hi, I receive telegram alerts, but some fields are blank, for example miner uptime Temp, Fan, Power how to fix? thanks [/quote] Are you on 19-1.3 ? YES For Miner info and Temp, Fan, Power in web stat and telegram there is an argument missing in 3main screen commands Open 3main with gedit and replace all with: there are 103 entries, change all of them?
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
October 18, 2017, 07:55:21 PM |
|
Hi, I receive telegram alerts, but some fields are blank, for example
miner uptime Temp, Fan, Power
how to fix? thanks
Are you on 19-1.3 ? YES For Miner info and Temp, Fan, Power in web stat and telegram there is an argument missing in 3main screen commands Open 3main with gedit and replace all with: there are 103 entries, change all of them? Yup, Ctrl+H, replace all You can skip maxximus and iamnotajeep , no need for telegram or web but good if u want to tail all logs with 1 command
|
|
|
|
HyPyk
Newbie
Offline
Activity: 27
Merit: 0
|
|
October 18, 2017, 08:06:36 PM |
|
with: there are 103 entries, change all of them? Yup, Ctrl+H, replace all You can skip maxximus and iamnotajeep , no need for telegram or web but good if u want to tail all logs with 1 command [/quote] so, if you change above there will be just one log window in Guake Terminal and all logs will be listed there? or everything will be default way, but by will be created a window with all_in_one log list? thanks a lot
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
October 18, 2017, 08:15:53 PM |
|
with: there are 103 entries, change all of them? Yup, Ctrl+H, replace all You can skip maxximus and iamnotajeep , no need for telegram or web but good if u want to tail all logs with 1 command so, if you change above there will be just one log window in Guake Terminal and all logs will be listed there? or everything will be default way, but by will be created a window with all_in_one log list? thanks a lot every thing is as before, but u can check miner, temp, fan ,... In telegram and web And in guake terminal or ssh you can run the tail command to see all logs in one screen
|
|
|
|
HyPyk
Newbie
Offline
Activity: 27
Merit: 0
|
|
October 18, 2017, 08:28:02 PM |
|
there are 103 entries, change all of them? [/quote] Yup, Ctrl+H, replace all You can skip maxximus and iamnotajeep , no need for telegram or web but good if u want to tail all logs with 1 command [/quote]
I did change them all, Temp, Fan, Power still shows blank in telegram alert.
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
October 18, 2017, 08:37:16 PM |
|
I did change them all, Temp, Fan, Power still shows blank in telegram alert.
Are you on 19-1.3 ?
|
|
|
|
HyPyk
Newbie
Offline
Activity: 27
Merit: 0
|
|
October 18, 2017, 08:38:22 PM |
|
I did change them all, Temp, Fan, Power still shows blank in telegram alert.
Are you on 19-1.3 ? I am on 19-1.3 yes
|
|
|
|
papampi
Full Member
Offline
Activity: 686
Merit: 140
Linux FOREVER! Resistance is futile!!!
|
|
October 18, 2017, 08:41:13 PM |
|
I did change them all, Temp, Fan, Power still shows blank in telegram alert.
Are you on 19-1.3 ? I am on 19-1.3 yes Did u restart 3main ? pkill -e screen pkill -f 3main
|
|
|
|
HyPyk
Newbie
Offline
Activity: 27
Merit: 0
|
|
October 18, 2017, 08:48:15 PM |
|
Did u restart 3main ? pkill -e screen pkill -f 3main [/quote] I did a reboot
|
|
|
|
|