Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1459
Clueless!
|
|
September 30, 2017, 04:31:55 AM |
|
Just got an email from Bitmain. They shipped my L3 today. So they managed to ship on time for the September order. Most of my orders since 2014 they have always shipped early. They managed to ship on time so that is good.
if in usa contact the shipper fedex or ups and pay the meager fee $37 usa ahead of time ...or in my case it it down to computer peripheral equip they had it at scientific equp for 97 bucks once you get the live person pay right away with them on the phone..it will save you 2 days when they hold it and try to get you on the phone to straighten it out also if they have the scientific equip thing you can talk them into computer peripheral equipment (hey, I use a laptop with putty!) and get it knocked down they told me 25 on the phone should have paid then when offered.....was 37 at the door anyway, how I'm gonna do it from now on..as soon as I get a tracking number gonna bug fed ex or ups and pay up front before it hits my door
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
|
|
|
|
|
Each block is stacked on top of the previous one. Adding another block to the top makes all lower blocks more difficult to remove: there is more "weight" above each block. A transaction in a block 6 blocks deep (6 confirmations) will be very difficult to remove.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
taserz
Sr. Member
Offline
Activity: 799
Merit: 293
Created AutoTune to saved the planet! ~USA
|
|
September 30, 2017, 06:32:27 AM |
|
Does anyone know how I can get a L3+ hasboard one of my older overclocked units finally killed a hashboard after running at 475mh for the past few months.
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1459
Clueless!
|
|
September 30, 2017, 06:44:48 AM |
|
Does anyone know how I can get a L3+ hasboard one of my older overclocked units finally killed a hashboard after running at 475mh for the past few months.
no idea in that you overclocked it...not overclocking it if you were under the 180 days you could get another one an L3+ should get 500 mh w/o overclocking ...so kinda confused how you overclocked it and only got 475 mh what am I missing? anyway, not that I know squat..but I'm up and can reply
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
biPolarbear
Newbie
Offline
Activity: 22
Merit: 0
|
|
September 30, 2017, 08:25:29 AM Last edit: September 30, 2017, 08:37:11 AM by biPolarbear |
|
Has anyone had any luck solo mining other coins with the l3+. If so how did you set it up?
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1459
Clueless!
|
|
September 30, 2017, 09:07:00 AM |
|
Has anyone had any luck solo mining other coins with the l3+. If so how did you set it up?
Just go to www.prohashing.com a multipool...mine with your scrypt-pow, and or x11 (what I do) and just get paid out in whatever you want dash/ltc/btc/etc at the present time all my equip is being paid out in LTC ...even the x11 miners... easy peasy...better odds imho The trick is to pick the right coin to get on the payout for your supposed pile of coins....and/or for hoarding purposes or whatever picking that is the trick ....works the same as solo mining 1 particular coin w/o the hassle with diff flavor's of asic equip too boot
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
zxcoiu
Newbie
Offline
Activity: 34
Merit: 0
|
|
September 30, 2017, 10:49:28 AM |
|
28 & 29 Sep Mining style - 3 x L3+
1 L3 + - GAMBLE YOUR ASS OUT IN SOLO MINING altcoins 1 L3 + - Litecoinpool - 0.57 LTC 1 L3 + - Solo mining Digibyte - 4 blocks
My formula for end of Sep
|
|
|
|
GMPoison
|
|
September 30, 2017, 11:54:56 AM |
|
28 & 29 Sep Mining style - 3 x L3+
1 L3 + - GAMBLE YOUR ASS OUT IN SOLO MINING altcoins 1 L3 + - Litecoinpool - 0.57 LTC 1 L3 + - Solo mining Digibyte - 4 blocks
My formula for end of Sep
Haha beautiful.
|
|
|
|
zxcoiu
Newbie
Offline
Activity: 34
Merit: 0
|
|
September 30, 2017, 12:22:14 PM |
|
If you have one, share you formula or opinion not just apreciation
|
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
|
September 30, 2017, 02:33:58 PM |
|
Does anyone know how I can get a L3+ hasboard one of my older overclocked units finally killed a hashboard after running at 475mh for the past few months.
no idea in that you overclocked it...not overclocking it if you were under the 180 days you could get another one an L3+ should get 500 mh w/o overclocking ...so kinda confused how you overclocked it and only got 475 mh what am I missing? anyway, not that I know squat..but I'm up and can reply I'm pretty sure that he means that he overclocked the frequency to 475 mhz and not the hash rate.
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
AU_AG
|
|
September 30, 2017, 03:09:33 PM |
|
Does anyone know how I can get a L3+ hasboard one of my older overclocked units finally killed a hashboard after running at 475mh for the past few months.
What were the temps and how long did u run befoe it died? Did upfradeing firmware and resetting multiple rimes work??
|
|
|
|
taserz
Sr. Member
Offline
Activity: 799
Merit: 293
Created AutoTune to saved the planet! ~USA
|
|
September 30, 2017, 04:52:42 PM |
|
Does anyone know how I can get a L3+ hasboard one of my older overclocked units finally killed a hashboard after running at 475mh for the past few months.
no idea in that you overclocked it...not overclocking it if you were under the 180 days you could get another one an L3+ should get 500 mh w/o overclocking ...so kinda confused how you overclocked it and only got 475 mh what am I missing? anyway, not that I know squat..but I'm up and can reply mhz sorry it was running at 600-620MH/s I have like a dozen running at that frequency of 469 or 475 Does anyone know how I can get a L3+ hasboard one of my older overclocked units finally killed a hashboard after running at 475mh for the past few months.
What were the temps and how long did u run befoe it died? Did upfradeing firmware and resetting multiple rimes work?? This one died out in only a few months not even reaching the 180 days lol. Was still worth it it ROI'd it self faster because I had it before many had the L3+. I reset the firmware I am going to try it again. I confirmed it was asic0 aka the one that normally runs the hottest for people. Temps were low 50's like 53-54 occasionally 56. Fans were always set to 80% but these were the batches of miners that the fans didn't go over 4,000 rpm so they ran slightly hotter as the other ones ran at 5,000 rpm at 80%
|
|
|
|
btcapollo
Member
Offline
Activity: 115
Merit: 10
|
|
September 30, 2017, 04:53:19 PM |
|
Has anyone had any luck solo mining other coins with the l3+. If so how did you set it up?
Just go to www.prohashing.com a multipool...mine with your scrypt-pow, and or x11 (what I do) and just get paid out in whatever you want dash/ltc/btc/etc at the present time all my equip is being paid out in LTC ...even the x11 miners... easy peasy...better odds imho The trick is to pick the right coin to get on the payout for your supposed pile of coins....and/or for hoarding purposes or whatever picking that is the trick ....works the same as solo mining 1 particular coin w/o the hassle with diff flavor's of asic equip too boot Are you having any issues connecting to Prohashing with the L3+? I tried to use it several times but always get kicked off around 3AM EST daily.
|
|
|
|
cuteman
|
|
September 30, 2017, 05:38:54 PM |
|
Just got an email from Bitmain. They shipped my L3 today. So they managed to ship on time for the September order. Most of my orders since 2014 they have always shipped early. They managed to ship on time so that is good.
Sounds good. My September S9s have been shipped beforehand about a week or so.
|
|
|
|
generalt
Legendary
Offline
Activity: 1096
Merit: 1021
|
|
September 30, 2017, 05:44:06 PM |
|
Just got an email from Bitmain. They shipped my L3 today. So they managed to ship on time for the September order. Most of my orders since 2014 they have always shipped early. They managed to ship on time so that is good.
Sounds good. My September S9s have been shipped beforehand about a week or so. Hit with UPS fees again. 2 L3+ for $36.00
|
BTC: 1GENERALrtBAjEv2Ps5cmEW1FADnXh1bCZ
|
|
|
taserz
Sr. Member
Offline
Activity: 799
Merit: 293
Created AutoTune to saved the planet! ~USA
|
|
September 30, 2017, 06:19:33 PM Last edit: September 30, 2017, 07:39:28 PM by taserz |
|
Just took apart the L3+ hashboard all look good.. hmm Just got an email from Bitmain. They shipped my L3 today. So they managed to ship on time for the September order. Most of my orders since 2014 they have always shipped early. They managed to ship on time so that is good.
Sounds good. My September S9s have been shipped beforehand about a week or so. Hit with UPS fees again. 2 L3+ for $36.00 That sounds about right every time I got something shipped. So I inspected my dead board and compared it to my good boards and they look visually identical. Could it just be a loose connector on the board that the ribbons connect to? If so how does one repair that? Or are there errors I should look for for a dead board aside from not getting temps.
|
|
|
|
zamans98
|
|
October 01, 2017, 05:13:51 AM |
|
fuck u Bitmain.
Order will be shipped on 10th, ie after their holiday. Might as well that day click and get October batch. Bullshit really. I paid via LTC, no delays whatsoever.
and some of my buddy got theirs shipped on 29th.
interesting bastard they are.
Bella (Bitmain) Sep 30, 21:16 CST
Dear xxxxxxxxxxxxxxxxx
Thanks for your order. Our shipping team is preparing the shipping for this batch, the orders will be shipped on first paid, first shipped basics, most orders are shipped already, rest orders are in the line, and will be shipped asap after holiday. You will get the notification with tracking No. after order is shipped, please pay your attention.
Thanks for understanding
Best regards, Bella Bitmain
|
|
|
|
cryptotore
|
|
October 01, 2017, 03:19:45 PM |
|
What was the L3+ price in the last batch?
|
|
|
|
Thetaj
|
|
October 01, 2017, 03:53:17 PM |
|
fuck u Bitmain.
Order will be shipped on 10th, ie after their holiday. Might as well that day click and get October batch. Bullshit really. I paid via LTC, no delays whatsoever.
and some of my buddy got theirs shipped on 29th.
interesting bastard they are.
Bella (Bitmain) Sep 30, 21:16 CST
Dear xxxxxxxxxxxxxxxxx
Thanks for your order. Our shipping team is preparing the shipping for this batch, the orders will be shipped on first paid, first shipped basics, most orders are shipped already, rest orders are in the line, and will be shipped asap after holiday. You will get the notification with tracking No. after order is shipped, please pay your attention.
Thanks for understanding
Best regards, Bella Bitmain
Be Happy you're not one of the poor bastards that bought the latest November batch @2280$.........By that time, profittability will be around 10$/day *maybe*. Also, no telling whether they'll actually be able to ship those in a timely manner. Bitmain being Bitmain as usual
|
|
|
|
parker423
|
|
October 01, 2017, 04:09:45 PM |
|
Hi,
my order changed to "Shipping" in my User Center. What does this mean?
When I click on the shipped tab there is no order shipped : (
Thanks
|
|
|
|
thiec
|
|
October 01, 2017, 04:21:05 PM |
|
Hi,
my order changed to "Shipping" in my User Center. What does this mean?
When I click on the shipped tab there is no order shipped : (
Thanks
Shipping mean its in progress to ship Shipper tab mean its was shipped (have the tracking number) L3++ Shipping :21-30 Nov still on sale in direct link
|
|
|
|
|