AMD Rebrand - RX570 / RX580 - Official Thread

[rhaegonz]

Did anyone has succesfuly undervolted any card with an uP9505 VRM controller? I have a RX570 MSI Gaming X 4GB with this VRM and looks harder than my NCP81022 since the VoI doesnt have a regulator section, i tried using the same as my NCP but it didn't work.

Stock VOI
34 00 03 01 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Mod VOI
46 00 03 01 01 03 12 00 10 96 88 00 00 00 00 00 0C 00 84 00 FF 00 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Yes, but not using the VBIOS - I did it in Linux realtime. Anyways... please post ROM - I don't like parsing tables using my eyes.

Thank you,

Stock BIOS:
http://www80.zippyshare.com/v/p3lLCbqH/file.html

and my Modded BIOS:
http://www95.zippyshare.com/v/YkqjuzMp/file.html

[rhaegonz]

Did anyone has succesfuly undervolted any card with an uP9505 VRM controller? I have a RX570 MSI Gaming X 4GB with this VRM and looks harder than my NCP81022 since the VoI doesnt have a regulator section, i tried using the same as my NCP but it didn't work.

Stock VOI
34 00 03 01 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Mod VOI
46 00 03 01 01 03 12 00 10 96 88 00 00 00 00 00 0C 00 84 00 FF 00 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Yes, but not using the VBIOS - I did it in Linux realtime. Anyways... please post ROM - I don't like parsing tables using my eyes.

Thank you,

Stock BIOS:
http://www80.zippyshare.com/v/p3lLCbqH/file.html

and my Modded BIOS:
http://www95.zippyshare.com/v/YkqjuzMp/file.html

Oh jesus, you tried inserting an entire voltage object into the table... how do you KNOW it'd a uP9505P? It could be that it's not... other possibility is that your I2C address inserted is wrong.

I know because of the I2C dump

0000 FF 00 00 00 00 00 00 00 00 66 66 66 00 00 00 00 .........fff....
0010 00 00 88 88 88 66 66 66 44 44 44 00 00 00 73 80 .....fffDDD...s.
0020 48 0E 40 00 32 00 22 0F 04 05 05 5A 00 00 88 29 H.@.2."....Z...)
0030 05 00 00 88 66 44 00 73 00 88 00 F8 0F 04 05 48 ....fD.s.......H
0040 5A 44 00 00 00 00 00 70 70 02 29 00 00 00 FF FF ZD.....pp.).....

According with the uP9505 spec sheet its an uP9505. Well the spec sheet says 03 not 02 but i confirm with this post (i think you know him ) https://forum-en.msi.com/index.php?topic=285641.0

[rhaegonz]

Did anyone has succesfuly undervolted any card with an uP9505 VRM controller? I have a RX570 MSI Gaming X 4GB with this VRM and looks harder than my NCP81022 since the VoI doesnt have a regulator section, i tried using the same as my NCP but it didn't work.

Stock VOI
34 00 03 01 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Mod VOI
46 00 03 01 01 03 12 00 10 96 88 00 00 00 00 00 0C 00 84 00 FF 00 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Yes, but not using the VBIOS - I did it in Linux realtime. Anyways... please post ROM - I don't like parsing tables using my eyes.

Thank you,

Stock BIOS:
http://www80.zippyshare.com/v/p3lLCbqH/file.html

and my Modded BIOS:
http://www95.zippyshare.com/v/YkqjuzMp/file.html

Oh jesus, you tried inserting an entire voltage object into the table... how do you KNOW it'd a uP9505P? It could be that it's not... other possibility is that your I2C address inserted is wrong.

I know because of the I2C dump

0000 FF 00 00 00 00 00 00 00 00 66 66 66 00 00 00 00 .........fff....
0010 00 00 88 88 88 66 66 66 44 44 44 00 00 00 73 80 .....fffDDD...s.
0020 48 0E 40 00 32 00 22 0F 04 05 05 5A 00 00 88 29 H.@.2."....Z...)
0030 05 00 00 88 66 44 00 73 00 88 00 F8 0F 04 05 48 ....fD.s.......H
0040 5A 44 00 00 00 00 00 70 70 02 29 00 00 00 FF FF ZD.....pp.).....

According with the uP9505 spec sheet its an uP9505. Well the spec sheet says 03 not 02 but i confirm with this post (i think you know him ) https://forum-en.msi.com/index.php?topic=285641.0

Hah! That one was me, indeed! I dunno... I got pissy when my insertion didn't work, and did it on Linux with direct hardware access.

So are you saying there is no way to do undervolt with VoI insertion in uP9505 for now?

[rhaegonz]

Did anyone has succesfuly undervolted any card with an uP9505 VRM controller? I have a RX570 MSI Gaming X 4GB with this VRM and looks harder than my NCP81022 since the VoI doesnt have a regulator section, i tried using the same as my NCP but it didn't work.

Stock VOI
34 00 03 01 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Mod VOI
46 00 03 01 01 03 12 00 10 96 88 00 00 00 00 00 0C 00 84 00 FF 00 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Yes, but not using the VBIOS - I did it in Linux realtime. Anyways... please post ROM - I don't like parsing tables using my eyes.

Thank you,

Stock BIOS:
http://www80.zippyshare.com/v/p3lLCbqH/file.html

and my Modded BIOS:
http://www95.zippyshare.com/v/YkqjuzMp/file.html

Oh jesus, you tried inserting an entire voltage object into the table... how do you KNOW it'd a uP9505P? It could be that it's not... other possibility is that your I2C address inserted is wrong.

I know because of the I2C dump

0000 FF 00 00 00 00 00 00 00 00 66 66 66 00 00 00 00 .........fff....
0010 00 00 88 88 88 66 66 66 44 44 44 00 00 00 73 80 .....fffDDD...s.
0020 48 0E 40 00 32 00 22 0F 04 05 05 5A 00 00 88 29 H.@.2."....Z...)
0030 05 00 00 88 66 44 00 73 00 88 00 F8 0F 04 05 48 ....fD.s.......H
0040 5A 44 00 00 00 00 00 70 70 02 29 00 00 00 FF FF ZD.....pp.).....

According with the uP9505 spec sheet its an uP9505. Well the spec sheet says 03 not 02 but i confirm with this post (i think you know him ) https://forum-en.msi.com/index.php?topic=285641.0

Hah! That one was me, indeed! I dunno... I got pissy when my insertion didn't work, and did it on Linux with direct hardware access.

So are you saying there is no way to do undervolt with VoI insertion in uP9505 for now?

God no, saying I got fed up for a bit and stopped trying. Doesn't mean it ain't doable.

Could you give me any hints so i can try by myself? I tried to find some info on internet but looks like this uP9505 is not very common and most info is about IR or NCP controllers.

[zorranco]

I'm mining ETH with Claymore with 390s and 580s and everything is fine, but with the 580s, no matter what OC I practice, the MH/s doesn't move.

I installed Anorak's forum BIOS and it went perfect, I went from 21 MH/s to 27, but OC seems to do nothing...is this normal?

[carlo_0000]

I'm mining ETH with Claymore with 390s and 580s and everything is fine, but with the 580s, no matter what OC I practice, the MH/s doesn't move.

I installed Anorak's forum BIOS and it went perfect, I went from 21 MH/s to 27, but OC seems to do nothing...is this normal?

oc on gpu or memory ?  on gpu yes it s normal it doesn't need high clock

[zorranco]

Rising memory from 2.000 to 2.100 MHz does absolutely nothing ¿?

I am using Anorak's forum modded BIOS, maybe it is because this BIOS takes the most out of the card? When I flahsed the bios, it was 21 MH/s, now mining ETH at 27,3 MH/s. Maybe it's because the card can't do more.

[treasure9]

Rising memory from 2.000 to 2.100 MHz does absolutely nothing ¿?

I am using Anorak's forum modded BIOS, maybe it is because this BIOS takes the most out of the card? When I flahsed the bios, it was 21 MH/s, now mining ETH at 27,3 MH/s. Maybe it's because the card can't do more.

I'm running 2160 mem and 1200 core on my 580 and getting 28.2 ETH + 500 DCR

[RfBTC]

Hi  guys!


I am running  MSI RX570 4GB  (Hynix Memory)....  i have applied BiodMOD  (Polaris + ATIFlash)  and  atikmdag patcher 1.4.5

I can get  around 27,9 - 28 mhs  (stable)  with  1350 / 2035 ( core/mem clock)..... when i tried up more 2035 it become unstable...


my question.... atikmdag (Pixel Clocking)  is really necesary to be applied ?  i think this could become some system unstable....

there are another setup to getting 29/30mhs   with  MSI RX570 4GB (Hynix Mem)  ?


P.D.  Pixel Clocker (atikmdag it said is necesary for Biosmodded driver recognitiion) , could it be avoided or just only applying Polaris is enough?

Thank you!

[zorranco]

I didn't applied it and my card went from 21 to 27 with anorak's forum modded BIOS. Enough for me.

But the thing is...I don't know what this patch does really

[rminer]

Hi there, I have 2 ASUS RX 570 4Gb ROG OC version(ELPIDA), and I can't change the core clock or the memory clock, also the temp and power limit are kind of lock to "0".

I tried and Anoraks BIOS MOD (the power saving) and I get like 25 Mhs, is there a way to get even more? Why can't I change the core/memory clock? thanks! (Im using Claymore 9.8 and Crimson Relive 17.7.2 - Win10 64bit)

I also have a MSI gtx 1060 6Gb, any advice on a mixed Rig? thank you so much for your help guys!!

[Vann]

Afterburner and other overclocking software won't work with the 17.7.2 drivers.

https://bitcointalk.org/index.php?topic=1433925.msg20543181#msg20543181

Use v17.7.1 or set the clocks in the Claymore miner.

[rminer]

Afterburner and other overclocking software won't work with the 17.7.2 drivers.

https://bitcointalk.org/index.php?topic=1433925.msg20543181#msg20543181

Use v17.7.1 or set the clocks in the Claymore miner.

Well that is a very good info, can you tell me how to rollback to previous driver? sorry to be a pain, but this is all new for me

[Vann]

Uninstall the drivers in safe mode using DDU and install the previous drivers from the setup that should be in the AMD folder located in the C:\ drive root. You can also download previous driver verisons from guru3d.com, where you can get DDU.

[elf_ua]

Hey guys,

Got a few Gigabyte RX570 4Gb with Samsung memory. Stock version shows 22MHs (Dual +DCR), with straps from 1625 or 1750 only 23 with +10 powerlimit (core 1140, Mem 2000, cV -96).

Could you please post a good strap for Rx with Samsung 4GB ? Can't find nothing acceptable. Only VMOD (near +45 powerlimit and +50 Core Voltage)

[DragonETH]

I managed to get 6 Sapphire 580 RX Nitro+ 8GB cards, when they were in stock. I am doing dual mining and I am getting stable 29 M/H  ETH and 5000 M/H DCR at the same time.

Temperature is around 65 degrees.

I was looking to build another rig, but can't find the cards in stock anymore. Does anyone know where I can get them in the UK?

I just ordered them from amazon 3rd party seller.
https://www.amazon.co.uk/dp/B071Y7CKM2/

Select "new from xxx"
Choose the cheapest non-amazon seller (3rd party) i got mine from zoriacrystal. 2 day delivery.
3rd rig.

Good luck

store in avatar is full of this crap GPUs, while excessive demand is not reduced, the release of new drivers only adds fuel to the fire, mining, what awaits us?

[chilliefly]

Hey All

I am running Linux OS (Simple mining) and I am looking to tweak my cards. I have a bunch of Assorted 570/580's and I have the memory timings all figured out and stable. However now I am trying to battle the power situation as Id like to lower it best I can (since Watts = heat and power consumption = $$$).

I've been using the power stage (DPM) feature I find it hit and miss depending on what im trying to do (I simply don't like using it for tweaking)...so id like to mod the BIOS on the cards and hard code the voltages.... Is this a viable solution ?  am i on the right track.

CURRENT Values: *large values/numbers are configured by vendors. Are they ranges of power i think? (general binned values for mass sale... since not all cards/silicon are equal)
 Mhz    mV
 300    750
 588    65282 (DPM stage 1)
 952    65283 (DPM stage 2)
 1041  65284 (DPM stage 3)
 1106  65285 (DPM stage 4)
 1168  65286 (DPM stage 5)
 1209  65287 (DPM stage 6)
 1244  65288 (DPM stage 7)

GOAL  To Hardset mV value: (I wouldn't know what exact values to put in here.... but this is estimation) can you guys help in this area???
 Mhz    mV
 300    750
 588    850 (DPM stage 1)
 952    850 (DPM stage 2)
 1041  850 (DPM stage 3)
 1106  850 (DPM stage 4)
 1150  875 (DPM stage 5)
 1200  900 (DPM stage 6)
 1250  950 (DPM stage 7)    1300 1000 (< would be cool to hit a high core but limit mV)
 

Am I on the right track ? Can this be done by hard-setting BIOS values?

Cheers

[Jackblow33]

chilliefly!

Your question deserve her own thread...

[toptek]

Sense it seems AMD is gonna play the price game , I'll just buy 1060 3 or 6gb to me NO AMD 570 4gb card is worth 309 when a  1060 6gb cost 289. and new egg now has Vega 64 in stock, some not many @ a 700 buck Price Tag for what is basically a peace of shit if the reviews are right , i don't know I'm not gonna buy one and all most did .

Depending on how much the Vega 56 goes for i may get one and i was hoping they would be good cards an actually replace my AMD RX 400's and RX 500 over time but looks like that may not  happen now .

[SeriousSnake]

Hello All.
I was able to get 6 x RX-500 series running on windows 10 x64. After two days the stupidest thing I tried worked  .
1. use DDU to clean the PC from any previous drivers.
2. Disable 4G decoding so you can log into windows (only  for Z170,H170, etc.)
3. Extract older driver for RX 400 series in Drive C: (I use 16.9.2 )
4. Extract driver for RX 500 series in Drive C: (I use 17.4.3)
5. Copy and replace all content from "C:\AMD\Non-WHQL-Win10-64Bit-Radeon-Software-Crimson-16.9.2-Sep21\Packages\Drivers\Display\WT6A_INF\B307117"  to "C:\AMD\WHQL-Win7-64Bit-Radeon-Software-Crimson-ReLive-17.4.3-Apr17\Packages\Drivers\Display\W76A_INF\B313057" (Basically you copy the old driver over the new)
6. Install the VGA cards manually from Device manager in Windows pointing path to the new driver 17.4.3 in this case.
7. Reboot and enable 4G Decoding in Bios
8. Enjoy if it works for you.

You can try with different driver versions if they work for you. I`m happy whit the 16.9.2 for the moment but any driver that works whit 6 and more RX 400 series GPUs should work  .

I know  that this solution sound stupid but it`s tested on 8 different rigs whit Asus Prime Z270-P and H270 Motherboards and works like a charm.
I`m pretty sure only handful of files need to be replaced but I don have the time to test more elegant solution.

Sorry for my English and grammar.

sorry for pushing old posts, does this method work with the aug 23 AMD blockchain drivers?
Thanks.