Tummler
Newbie
Offline
Activity: 53
Merit: 0
|
|
April 25, 2017, 10:28:42 PM |
|
Gigabyte Gaming 580 is running a steady 29-30mh/s, Aorus is absolutely no different, MSI Armor I bitched about before are actually the best cards at 30-31mh/s. Red Devil's arriving tomorrow.........and I'm out of boards.
So far the MSI X170a gaming m5 has been a clusterfuck bitch trying to get to run more than 4 cards, instead of 7. Still looking for a solution :\
I run this board with 9 cards without issue, and it was very easy to get running. I have helped a couple people with this board, and to the best of my knowledge, everyone has been able to get it to work with the following steps: 1. Use a Skylake processor. One person I know of started with a Kaby Lake processor, and he could not get the board to run more than 4 cards without switching to a Skylake. 2. Update the BIOS to the latest version. 3. Enable above 4g decoding 4. Leave all other settings alone, especially the settings concerning PCIe speed. I've got some more risers arriving this evening. All my boards have Skylake i5's, 8gb of 2400 RAM. I set the 4G, other settings to Gen 2 and my one test board is running 4 cards. Two on the board and 2 using risers. Until I get more risers in, not much else I can do for now. It is likely "other settings to Gen 2" that is causing you the problems. This is precisely what I was referring to when I said "leave all other settings alone, especially concerning PCIe speed." Change those settings back to "Auto," and see if that helps.
|
|
|
|
CFX_003
Newbie
Offline
Activity: 5
Merit: 0
|
|
April 25, 2017, 10:53:27 PM |
|
|
|
|
|
SunStruck
|
|
April 25, 2017, 11:20:26 PM |
|
RX 580 Pulse(Elpida) with BIOS Mod -dcri 32
looks great for dual mine , can you show eth only ?
|
|
|
|
WhyMe
|
|
April 25, 2017, 11:26:44 PM |
|
Hi, I really appreciate the feedback. Could you please elaborate what I should do with the link? Are these some BIOS parameters that I should edit with a HEX editor or something? copy whatever original strap you want to mod.. like 1500, 1625, or 1750 from your bios and paste it into the link over the strap thats in the link. the output will be the modded strap and should have higher mhs. I did not make the tool Can't we just get strap from a 470 Armor OC an copy to 570 Armor OC ? And what about flashing 570 with a 470 bios ? Thanks
|
|
|
|
CFX_003
Newbie
Offline
Activity: 5
Merit: 0
|
|
April 25, 2017, 11:32:45 PM |
|
RX 580 Pulse(Elpida) with BIOS Mod -dcri 32
looks great for dual mine , can you show eth only ? http://i65.tinypic.com/qqdcw4.jpg
|
|
|
|
SunStruck
|
|
April 26, 2017, 01:34:06 AM |
|
RX 580 Pulse(Elpida) with BIOS Mod -dcri 32
looks great for dual mine , can you show eth only ? Not too shabby , thanks for letting me know
|
|
|
|
vonuke
Full Member
Offline
Activity: 196
Merit: 100
I'm on the moon
|
|
April 26, 2017, 01:57:54 PM |
|
I've just received my Sapphire RX 570 Pulse MINI ITX card. link http://www.sapphiretech.com/productdetial.asp?pid=3548F713-062B-4A98-B584-D0D211C5308E&lang=engThis is the smallest RX card u can get, and suprisingly has very powerful heating included VRM and RAM as well. Doing 22,4 MH/s ETH speed without bios mod. Temp = 52 (!!!) celsius GPU:1000 Mhz / 850 mV RAM: deafult 1750 Mhz / 850mV fan = 1044rpm (!!!) Power target = -30% Power consuption on wall: 153 W ( with a Ryzen 1700X. System consumes 62 - 65 W in idle), so card consuption is about 90-95W What is ram brand
|
|
|
|
klaaas
|
|
April 26, 2017, 02:19:54 PM |
|
If u can get 470/480 cheap, go for it. Maybe the 580 will have a better resale value, and some come with spare vents, but that's about it.
In Holland the MSI 470 is sold-out or priced above the 570
|
|
|
|
yatta
Member
Offline
Activity: 93
Merit: 10
|
|
April 26, 2017, 05:35:48 PM |
|
Anyone managed to run 5-6 rx 570 on Win?
|
ETH 0xe3c8d2587e03ac3bdcb86794b8227c000db54d25
|
|
|
Pennywis3 (OP)
|
|
April 26, 2017, 06:19:09 PM Last edit: April 26, 2017, 06:44:15 PM by Pennywis3 |
|
Anyone managed to run 5-6 rx 570 on Win?
Do we know where the problem lies? Drivers, Patcher?
|
|
|
|
johnyroulette
Newbie
Offline
Activity: 8
Merit: 0
|
|
April 26, 2017, 09:01:10 PM |
|
Tomorrow I will have to decide which cards to buy, MSI Gaming X RX570 4GB or Sapphire RX570 NITRO+ 4GB. I am curious if there will be a significant difference in power usage between those cards. Maybe someone has those two types of cards and can provide info?
|
|
|
|
yatta
Member
Offline
Activity: 93
Merit: 10
|
|
April 26, 2017, 09:03:04 PM |
|
Anyone managed to run 5-6 rx 570 on Win?
Do we know where the problem lies? Drivers, Patcher? Driver.
|
ETH 0xe3c8d2587e03ac3bdcb86794b8227c000db54d25
|
|
|
Truthchanter
|
|
April 26, 2017, 09:03:47 PM |
|
I heard even for win10 that the rx 500 series can't do 6gpu.. only 5gpu.. anyone know? (any mobo)
|
|
|
|
Spacemarko
|
|
April 26, 2017, 09:06:50 PM |
|
Same problem here. Even with 5 vga it is not 100% stable. Asus strix 570.
|
|
|
|
DragonETH
Sr. Member
Offline
Activity: 588
Merit: 250
https://www.projecton.pro/
|
|
April 26, 2017, 09:32:24 PM |
|
500 series increases the costs of electricity bills or not?
|
░░▒▓▓▓▓▓▒░░ ░░░▓▓▓▓▓░░░▓▓▓▓▓░░░ ░░░▓▓▓▓▓░░░ ░░░▓▓▓▓▓░░░ ░░░▓▓▓▓▓▒░░ ░░▒▓▓▓▓▓░░░ ░▓▓▓▓░░░ ░░░░░░░░░░░░░░░ ░░░▓▓▓▓░ ░▓▓▒░ ░▓██████████████▒░ ░▓▓▓░ ░▓▓▒░ ░█████░ ░█████░ ░▓▓▓░ ░▓▓▒░ ░█████░░░░█████░ ░▓▓▓░ ░▓▓▒░ ░████████████▓░░ ░▓▓▓░ ░▓▓▒░ ░▓████░░░░░░░ ░▓▓▓░ ░▓▓▒░ ░▒███████▓▓░ ░▓▓▓░ ░▓▓▒░ ░▓█████████░ ░▓▓▓░ ░▓▓▓▒░░ ░░▒▓▓▓░ ░░░▓▓▓▓▓░░░ ░░░▓▓▓▓▓░░░ ░░░▓▓▓▓▓░░░ ░░░▓▓▓▓▓░░ ░░▒▓▓▓▓▒░░░▒▓▓▓▓▒░░░ ░░░▓▓▓▓▓▓▓░░░ | | █████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████ ██ ██ ██ ██ PROJECTON
█████████████████████████████████████████████████████████████████████████████████████████████████████████████████████████
| ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██
| | ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██ ██۞۞██
| |
|
|
|
Spacemarko
|
|
April 26, 2017, 09:51:13 PM |
|
500 series increases the costs of electricity bills or not?
Not
|
|
|
|
PetrMiner
Newbie
Offline
Activity: 7
Merit: 0
|
|
April 26, 2017, 09:57:13 PM |
|
Gigabyte Gaming 580 is running a steady 29-30mh/s, Aorus is absolutely no different, MSI Armor I bitched about before are actually the best cards at 30-31mh/s. Red Devil's arriving tomorrow.........and I'm out of boards.
So far the MSI X170a gaming m5 has been a clusterfuck bitch trying to get to run more than 4 cards, instead of 7. Still looking for a solution :\
1. make sure you have the newest bios for the mobo 2. windows 10 installed in uefi mode (msinfo32 in run and check bios type to confirm) 3. enable above 4gb decoding 4. may have to experiment with peg 0 and peg 1 gen types and the internal graphics adapter mem setting (64 instead of 32 maybe) Hi, today I received a MSI RX 570 ARMOR OC 4GB. It has Hynix memory and I can't get my hashrate over 22 in any way. I'm using 17.4.3 relive driver with pixel patch I've tried editing bios timings - 1:1500 to 1:2000
- 1:1750 to 1:2000
I've also tried overclocking memory clock, but it only has a negative effect to the hashrate. GPU clock is 1268 by default. Any suggestions would be welcome. --edit-- I achieved 27.3 MH/s with timing 2:1500-2:2000 and Memory clock at 2000. At 2100 it got unstable. Any ideas what else to try? If you use the 1625 strap and 0150E2A3186272E16">http://doreymills.ca/cgi-bin/strapmod?555000000000000022CC1C00AD515A3EC0570E142D4A64080049C700030114207A8900A00300000 0150E2A3186272E16to mod it and then try to get above 2000, like 2050 or 2075.. you may get higher hashrate I think in Europe/Asia they should already be in stores so someone here already bought one or two.
In North America it doesn't get released for a few more hours..
hello for 7 cards working on this mobo you need lastest bios and setup some settings in bios
|
|
|
|
Spacemarko
|
|
April 26, 2017, 10:01:14 PM |
|
The mobo is not a problem. Having 6 cards working with 500 series is not posible right now. I think patch is the problem and need to be modife. Or we need new drivers...
|
|
|
|
kiaas
Jr. Member
Offline
Activity: 42
Merit: 12
|
|
April 26, 2017, 10:02:49 PM |
|
500 series increases the costs of electricity bills or not?
If you leave it completely stock settings it will. You can drop the core clocks to match the 400 series and drop the voltage and save power. It seems like people are finding ways to save More power doing that with the 500 series than the 400 series. I don't know exactly why as I haven't looked into the differences of the new process used. (One POSSIBILITY is lower leakage current from transistors in the Off state, which would explain clocking higher better, and the other is it just tolerating lower voltages better for some other reason.)
|
|
|
|
PetrMiner
Newbie
Offline
Activity: 7
Merit: 0
|
|
April 26, 2017, 10:03:51 PM |
|
Hello,
I have now 6x XFX RX580 Black edition rig.
Using windows 10 64bit and claymore 9.2 .
I have problem after instaling driver all cards show device must be stopped. It is probably caused by risers.
Does anyone 4 or more RX580 miner rig set up?
|
|
|
|
|