techno8k
Newbie
 Offline
Activity: 31
Merit: 0
|
 |
June 04, 2017, 06:25:38 PM |
|
Does anyone know what memory brand these two models have below? And how do you think they will perform in terms of default hashing rate, and the hashing rate and power usage when flashed? Thanks
ASUS Radeon RX 580 8GB Dual-fan OC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card (DUAL-RX580-O8G) [https://www.amazon.com/B071L1VGQW]
ASUS ROG-STRIX-RX580-O8G-GAMINGOC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card [https://www.amazon.com/dp/B071D8YQJD]
|
|
|
|
|
|
centurionMiner
|
|
June 04, 2017, 06:34:55 PM |
|
Does anyone know what memory brand these two models have below? And how do you think they will perform in terms of default hashing rate, and the hashing rate and power usage when flashed? Thanks
ASUS Radeon RX 580 8GB Dual-fan OC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card (DUAL-RX580-O8G) [https://www.amazon.com/B071L1VGQW]
ASUS ROG-STRIX-RX580-O8G-GAMINGOC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card [https://www.amazon.com/dp/B071D8YQJD]
I have 2 Strix. 1 goes 28 modded bios, the other 27 modded bios. Power usage 105W and 95W. The second card can't reach 1950 MHz. |
|
|
|
techno8k
Newbie
Offline
Activity: 31
Merit: 0
|
|
June 04, 2017, 06:37:21 PM |
|
Does anyone know what memory brand these two models have below? And how do you think they will perform in terms of default hashing rate, and the hashing rate and power usage when flashed? Thanks
ASUS Radeon RX 580 8GB Dual-fan OC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card (DUAL-RX580-O8G) [https://www.amazon.com/B071L1VGQW]
ASUS ROG-STRIX-RX580-O8G-GAMINGOC Edition GDDR5 DP HDMI DVI VR Ready AMD Graphics Card [https://www.amazon.com/dp/B071D8YQJD]
I have 2 Strix. 1 goes 28 modded bios, the other 27 modded bios. Power usage 105W and 95W. The second card can't reach 1950 MHz. Which memory does the strix 580 have and does it meet your expectations? |
|
|
|
|
|
centurionMiner
|
|
June 04, 2017, 06:49:02 PM |
|
My 2 strix have Elpida memory. Nice hardware and nice price (250€ but all out of stock here in Italy). I was a little bit disappointed with the second card, because it doesn't reach the other GPU computing power. However i've buyed another 2 nitro+ 570 4g, maybe they will be better  |
|
|
|
|
Mattthev
|
|
June 04, 2017, 07:05:59 PM |
|
My 2 strix have Elpida memory. Nice hardware and nice price (250€ but all out of stock here in Italy). I was a little bit disappointed with the second card, because it doesn't reach the other GPU computing power. However i've buyed another 2 nitro+ 570 4g, maybe they will be better Strix with Elpida is great. Almost same as with Samsung. XMR I'm getting 830H/s with Samsung and 825H/s with Elpida. ETH both above 29MH/s. |
|
|
|
|
molitar
|
|
June 04, 2017, 07:16:27 PM |
|
So what model card is best for the power and hash rate? Sucks the RX 470 are practically impossible to find now.
|
|
|
|
|
RobertD
Newbie
Offline
Activity: 42
Merit: 0
|
|
June 04, 2017, 09:51:57 PM |
|
So what model card is best for the power and hash rate? Sucks the RX 470 are practically impossible to find now.
AMD RX 560 4GB Nvidia GTX 1070 8GB |
|
|
|
|
Eliavres
Jr. Member
Offline
Activity: 58
Merit: 10
|
|
June 05, 2017, 12:03:36 AM |
|
The rx560...seriously? How many MH can it pull in ETH?
|
|
|
|
|
Q_R_V
Sr. Member
Offline
Activity: 428
Merit: 250
Inactivity: 8963
|
|
June 05, 2017, 12:32:21 AM |
|
The rx560...seriously? How many MH can it pull in ETH?
13 |
|
|
|
|
m0bilitee
Newbie
Offline
Activity: 49
Merit: 0
|
|
June 05, 2017, 02:10:16 AM |
|
The rx560...seriously? How many MH can it pull in ETH?
13 Now if that's at 45 watts.....then we got something... |
|
|
|
|
RobertD
Newbie
Offline
Activity: 42
Merit: 0
|
|
June 05, 2017, 06:49:23 AM |
|
The rx560...seriously? How many MH can it pull in ETH?
15.5mhs with 1300/2100 clocks at 60w, basicly half a RX470 |
|
|
|
|
|
spyshagg
|
|
June 05, 2017, 08:44:43 AM |
|
The rx560...seriously? How many MH can it pull in ETH?
15.5mhs with 1300/2100 clocks at 60w, basicly half a RX470 tweaked 570 = 27Mh/s @ 91w at the wall (64w on gpu-z). Could be >29Mh/s >100w but my elpida does not clock enough. |
|
|
|
|
|
centurionMiner
|
|
June 05, 2017, 09:06:09 AM |
|
The rx560...seriously? How many MH can it pull in ETH?
15.5mhs with 1300/2100 clocks at 60w, basicly half a RX470 tweaked 570 = 27Mh/s @ 91w at the wall (64w on gpu-z). Could be >29Mh/s >100w but my elpida does not clock enough. Model and memory? |
|
|
|
|
Xardas2014
|
|
June 05, 2017, 09:23:19 AM |
|
Anyone else can;t get Trixx, Afterburner, or even gpuz to show clocks with 5xx cards with modded vbios? And hopefully know a workaround.
None of them show the clocks, or anything else, and I can't change anything either. GpuZ shows the wattage used, but not much else. The drivers are cobbled together so 7 cards will run. Using Trixx on one machine I'm able to at least see the clocks by hitting the stealth button, make changes, and save................but none of the changes apply or when they loaded they can't be applied. Hitting "apply" doesn't do a dam thing.
Right now the only way to make/apply changes is putting them in the .bat that Claymore uses. It is rather annoying.
|
|
|
|
|
vitaminas
Jr. Member
Offline
Activity: 69
Merit: 1
|
|
June 05, 2017, 10:05:09 AM |
|
Anyone else can;t get Trixx, Afterburner, or even gpuz to show clocks with 5xx cards with modded vbios? And hopefully know a workaround.
None of them show the clocks, or anything else, and I can't change anything either. GpuZ shows the wattage used, but not much else. The drivers are cobbled together so 7 cards will run. Using Trixx on one machine I'm able to at least see the clocks by hitting the stealth button, make changes, and save................but none of the changes apply or when they loaded they can't be applied. Hitting "apply" doesn't do a dam thing.
Right now the only way to make/apply changes is putting them in the .bat that Claymore uses. It is rather annoying.
hello, i know what you are talking about Trixx does not load the settings for a group of cards all together you need to save them 1 by one in the same profile lets say profile 1. Then when you want to load the setup you go to settings select the card press profile 1 and load then aplly. Go back to settings select te next card, press the profile 1 again and load and aplly and do this for all the others. Trixx Save the definitions of each graphic card in the same profile but cannot load them simultaneous. |
|
|
|
|
|
dragonmike
|
|
June 05, 2017, 10:34:33 AM |
|
Also, every time I've tried to use Afterburner with a 7-GPU rig, the whole thing crashed after it applied OC's to the 7th card. There must be some limitation there.
|
|
|
|
|
|
Mattthev
|
|
June 05, 2017, 10:58:51 AM |
|
When you know stable clocks you can set them in bios as default.
|
|
|
|
|
Xardas2014
|
|
June 05, 2017, 11:09:03 AM |
|
When you know stable clocks you can set them in bios as default.
It is pretty fucking hard to find the best stable low wattage settings to hard code into the bios when you can't use something like Trixx or Afterburner to try different things  |
|
|
|
|
|
spyshagg
|
|
June 05, 2017, 11:11:23 AM |
|
The rx560...seriously? How many MH can it pull in ETH?
15.5mhs with 1300/2100 clocks at 60w, basicly half a RX470 tweaked 570 = 27Mh/s @ 91w at the wall (64w on gpu-z). Could be >29Mh/s >100w but my elpida does not clock enough. Model and memory? asus expedition. Elpida (1850mhz max). eth only= 1090/1850mhz @ 831mv = 91w (wall) Dual mining = 1130/1850mhz @ 831mv = 118w (wall) |
|
|
|
|
gaato77
Newbie
Offline
Activity: 37
Merit: 0
|
|
June 05, 2017, 11:27:17 AM |
|
will be possible to see a modded bios for RX570 to get <100 and higher rates of mhs?
|
|
|
|
|
|
