AMD Rebrand - RX570 / RX580 - Official Thread

[montagid]

Is it possible to mine with two different graphic cards in a rig over nicehash? For example with a gtx 1050ti and a rx 550?
thx

[oik1]

is someone here sell custom vbios? for red devil rx 580

thx u

[plucknick]

I managed to get 6 Sapphire 580 RX Nitro+ 8GB cards, when they were in stock. I am doing dual mining and I am getting stable 29 M/H  ETH and 5000 M/H DCR at the same time.

Temperature is around 65 degrees.

I was looking to build another rig, but can't find the cards in stock anymore. Does anyone know where I can get them in the UK?

[vapourminer]

Is it possible to mine with two different graphic cards in a rig over nicehash? For example with a gtx 1050ti and a rx 550?
thx

yes. i use claymores dual miner directly, mining eth and decred at nicehash.  390, 2x470, 460, 1070

[lyrko]

I managed to get 6 Sapphire 580 RX Nitro+ 8GB cards, when they were in stock. I am doing dual mining and I am getting stable 29 M/H  ETH and 5000 M/H DCR at the same time.

Temperature is around 65 degrees.

I was looking to build another rig, but can't find the cards in stock anymore. Does anyone know where I can get them in the UK?

I just ordered them from amazon 3rd party seller.
https://www.amazon.co.uk/dp/B071Y7CKM2/

Select "new from xxx"
Choose the cheapest non-amazon seller (3rd party) i got mine from zoriacrystal. 2 day delivery.
3rd rig.

Good luck

[Utrine]

Is it possible to mine with two different graphic cards in a rig over nicehash? For example with a gtx 1050ti and a rx 550?
thx

yes. i use claymores dual miner directly, mining eth and decred at nicehash.  390, 2x470, 460, 1070

Can you mix the 390 and 1070 directly?

[vapourminer]

Is it possible to mine with two different graphic cards in a rig over nicehash? For example with a gtx 1050ti and a rx 550?
thx

yes. i use claymores dual miner directly, mining eth and decred at nicehash.  390, 2x470, 460, 1070

Can you mix the 390 and 1070 directly?

yes. the 390 and 1070 (and the others i listed) are in the same rig. just install both amd and nvidia drivers. claymores dual miner will recognize and use both.

i have also run claymore on the amds and ewbf on the 1070 on the same rig. just need to point the miners at the right cards via command line options on the miner(s). then point both at nicehash and use the same btc addy for both miners.


this is on win7. AFAIK you cannot mix on *nix.

[Gornidah]

Hi,
i have rx 570 4GB asus rog strix and they are very very unstable... i tried somethings but nothing help my speed now is 25.5-25.9.
memory is elpida, in bios i change only straps copy...is enything else what i need to try...driver,bios,....i donot now...something
also every few hours i must restart pc, claymor stop...

Same problem here, modded it with anorak's bios but still low hashrate and high temperatures... Sapphire its much better!

[pencas]

How much consume a rx570/580 from the riser?

[DragonETH]

Is it possible to mine with two different graphic cards in a rig over nicehash? For example with a gtx 1050ti and a rx 550?
thx

yes. i use claymores dual miner directly, mining eth and decred at nicehash.  390, 2x470, 460, 1070

Can you mix the 390 and 1070 directly?

yes. the 390 and 1070 (and the others i listed) are in the same rig. just install both amd and nvidia drivers. claymores dual miner will recognize and use both.

i have also run claymore on the amds and ewbf on the 1070 on the same rig. just need to point the miners at the right cards via command line options on the miner(s). then point both at nicehash and use the same btc addy for both miners.


this is on win7. AFAIK you cannot mix on *nix.

1070 and 580 have the difference in price.  it's paid to their performance and efficiency or is it the stereotype.

[carlo_0000]

How much consume a rx570/580 from the riser?

 not tested but i supposed to use max 75w  but could be some more
 

[plucknick]

I managed to get 6 Sapphire 580 RX Nitro+ 8GB cards, when they were in stock. I am doing dual mining and I am getting stable 29 M/H  ETH and 5000 M/H DCR at the same time.

Temperature is around 65 degrees.

I was looking to build another rig, but can't find the cards in stock anymore. Does anyone know where I can get them in the UK?

I just ordered them from amazon 3rd party seller.
https://www.amazon.co.uk/dp/B071Y7CKM2/

Select "new from xxx"
Choose the cheapest non-amazon seller (3rd party) i got mine from zoriacrystal. 2 day delivery.
3rd rig.

Good luck

Thanks @lyrko. Just ordered two cards.

[zorranco]

Wow, you are paying more than 400 € x card.

I managed to buy 2 MSI 580 Armor @ 300 € each...not the most known store, but ppl say it's more or less ok. Arrival in 2-10 days, though.

[batman3]

i dont now how,  you gave 400e for one card...rig (6 card) cost 2400e+motherrboard,psu...500e that is 2900euro.

eth is 160eura, if you get lucky, you have speed(now) 170MH/s and you mined for month 1.5ETH that is 240EURO for month and fee...eth to bitcoin...bla bla that is 200e max max....

That mean 14 month to get back money...that case is now for 4 month situation will be more bad (120-150euro max) dag file growing, speed get slower(MH/s)...

tell where I`m wrong....

[Mattthev]

Just wait few weeks, GPUs are in stock at lot of sellers and price will go down soon too.

[Marvell1]

Just wait few weeks, GPUs are in stock at lot of sellers and price will go down soon too.

yup the low eth prices have seen to that

[rhaegonz]

Did anyone has succesfuly undervolted any card with an uP9505 VRM controller? I have a RX570 MSI Gaming X 4GB with this VRM and looks harder than my NCP81022 since the VoI doesnt have a regulator section, i tried using the same as my NCP but it didn't work.

Stock VOI
34 00 03 01 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Mod VOI
46 00 03 01 01 03 12 00 10 96 88 00 00 00 00 00 0C 00 84 00 FF 00 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

[Evintiman]

Just wait few weeks, GPUs are in stock at lot of sellers and price will go down soon too.

I see the price of the 580 is still very high.

[rhaegonz]

Did anyone has succesfuly undervolted any card with an uP9505 VRM controller? I have a RX570 MSI Gaming X 4GB with this VRM and looks harder than my NCP81022 since the VoI doesnt have a regulator section, i tried using the same as my NCP but it didn't work.

Stock VOI
34 00 03 01 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Mod VOI
46 00 03 01 01 03 12 00 10 96 88 00 00 00 00 00 0C 00 84 00 FF 00 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Yes, but not using the VBIOS - I did it in Linux realtime. Anyways... please post ROM - I don't like parsing tables using my eyes.

Thank you,

Stock BIOS:
http://www80.zippyshare.com/v/p3lLCbqH/file.html

and my Modded BIOS:
http://www95.zippyshare.com/v/YkqjuzMp/file.html

[rhaegonz]

Did anyone has succesfuly undervolted any card with an uP9505 VRM controller? I have a RX570 MSI Gaming X 4GB with this VRM and looks harder than my NCP81022 since the VoI doesnt have a regulator section, i tried using the same as my NCP but it didn't work.

Stock VOI
34 00 03 01 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Mod VOI
46 00 03 01 01 03 12 00 10 96 88 00 00 00 00 00 0C 00 84 00 FF 00 01 07 0C 00 0E 00 00 00 00 00 00 00 04 00 24 00 00 04 00 00 02 80 10 00 00 00 00 00 20 03 00 00 10 00 52 03 02 00 00 00 84 03 02 00 10 00 B6 03

Yes, but not using the VBIOS - I did it in Linux realtime. Anyways... please post ROM - I don't like parsing tables using my eyes.

Thank you,

Stock BIOS:
http://www80.zippyshare.com/v/p3lLCbqH/file.html

and my Modded BIOS:
http://www95.zippyshare.com/v/YkqjuzMp/file.html

Oh jesus, you tried inserting an entire voltage object into the table... how do you KNOW it'd a uP9505P? It could be that it's not... other possibility is that your I2C address inserted is wrong.

I know because of the I2C dump

0000 FF 00 00 00 00 00 00 00 00 66 66 66 00 00 00 00 .........fff....
0010 00 00 88 88 88 66 66 66 44 44 44 00 00 00 73 80 .....fffDDD...s.
0020 48 0E 40 00 32 00 22 0F 04 05 05 5A 00 00 88 29 H.@.2."....Z...)
0030 05 00 00 88 66 44 00 73 00 88 00 F8 0F 04 05 48 ....fD.s.......H
0040 5A 44 00 00 00 00 00 70 70 02 29 00 00 00 FF FF ZD.....pp.).....

According with the uP9505 spec sheet its an uP9505. Well the spec sheet says 03 not 02 but i confirm with this post (i think you know him ) https://forum-en.msi.com/index.php?topic=285641.0