SRBPolaris V3.5 - BIOS editor for AMD RX4XX and RX5XX cards

[flamefaker]

Hey doc, before i take more of your time, i also want to share some more details as i forgot to write them in the earlier posts. The Card i have is a Sapphire Radeon RX 580 Special Edition. Only thing i had changed were the straps (Easy Mode, 1:1750 to 1:2000 and 2:1750 to 2:2000 and 2:2250). I had flashed the card several times and every time it worked. But at some point, it began showing me those Unknown values in GPU-Z. And then i began experimenting with BIOSes from some other people in hope, that i can resolve this issue. Flashed the BIOS of a Limited Edition and found another Special Edition BIOS on some other Forum but still to no avail.

 I think someone already uploaded a BIOS for this but if you want to look this up i would be delighted to share this with you.

But i really didn't do anything else besides following those guides on the net. Still thankful for any advice so as to avoid the same situation.

With Regards

[1713983381]

1713983381

[1713983381]

1713983381

[1713983381]

1713983381

[1713983381]

1713983381

[bardacuda]

Try running atikmdag-patcher after you install the AMD drivers. They have a BIOS signature check that needs to be removed when using a modded BIOS.

https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

[pchampn]

The latest version of SRB PolarisV3 was recognized by Windows Defender to have a Trojan "win32/fuery.B!cl" in the SRBPolaris.exe file. See this image file for details: http://imgur.com/ybJ2Dcm

OP: can you please explain why you are inserting Trojan file in your program?

Admins: please flag this program, as it may contain Trojan files.

Sorry but no trojans in the program. Now go back to your cave please.

Hello doktor83,

I went back read through the thread. Apologies, I will delete my post. However, I am still not able to use this tool, as it asks me to install .NET framework 3.5 and the install fails giving me an error code  0x800f081f. Please see the screenshots (http://imgur.com/a/D4oQu). Can you please advise how to fix these errors and use this tool.

FYI, I am using Windows 10 OS on my mining machine.

Thanks.

[pchampn]

The latest version of SRB PolarisV3 was recognized by Windows Defender to have a Trojan "win32/fuery.B!cl" in the SRBPolaris.exe file. See this image file for details: http://imgur.com/ybJ2Dcm

OP: can you please explain why you are inserting Trojan file in your program?

Admins: please flag this program, as it may contain Trojan files.

Read the thread. And delete your post.
Thanks!

Just deleted my post. Still having issues with using this tool though, as it asks me to install dot NET 3.5 and I am unable to install it. See my other post for details. Did you have similar issues?

[flamefaker]

Try running atikmdag-patcher after you install the AMD drivers. They have a BIOS signature check that needs to be removed when using a modded BIOS.

https://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

thanks baracuda, will do so now

[bardacuda]

@flamefaker

Did that solve your issue?

[Frozentear]

All 3 versions downloaded on mega (3; 2.66; 2.65) contain the virus. My PC regularly extremely lagging on the Internet by ~24+ hours after power-up, but after the program was uninstalled everything went fine.
https://pp.userapi.com/c639523/v639523724/3c51e/Ncw5p1tCXnc.jpg

[P00P135]

All 3 versions downloaded on mega (3; 2.66; 2.65) contain the virus. My PC regularly extremely lagging on the Internet by ~24+ hours after power-up, but after the program was uninstalled everything went fine.

https://www.virustotal.com/#/file/df47ea3815f7bce85db1c5b7925e328fdaabbe0f15b7247122b2ab49f6759036/detection

v3 only has 24/61 flagged viruses.  Not bad 

[doktor83]

Sorry guys, don't know what to say other than don't use it if you think it contains a virus.
And frozentear its nice to see you only registered just to warn people, you are a hero lol.

[doktor83]

The latest version of SRB PolarisV3 was recognized by Windows Defender to have a Trojan "win32/fuery.B!cl" in the SRBPolaris.exe file. See this image file for details: http://imgur.com/ybJ2Dcm

OP: can you please explain why you are inserting Trojan file in your program?

Admins: please flag this program, as it may contain Trojan files.

Sorry but no trojans in the program. Now go back to your cave please.

Hello doktor83,

I went back read through the thread. Apologies, I will delete my post. However, I am still not able to use this tool, as it asks me to install .NET framework 3.5 and the install fails giving me an error code  0x800f081f. Please see the screenshots (http://imgur.com/a/D4oQu). Can you please advise how to fix these errors and use this tool.

FYI, I am using Windows 10 OS on my mining machine.

Thanks.

Download .net 3.5 offline installer from microsoft site, and install it, that should help.

[Branko]

All 3 versions downloaded on mega (3; 2.66; 2.65) contain the virus. My PC regularly extremely lagging on the Internet by ~24+ hours after power-up, but after the program was uninstalled everything went fine.

How did you "install" and "deinstall" program that doesn't have installer and deinstaller?
Did just fact that it sat in some directory made your PC lagging?

[Munhenhos]

Should I unlock shadders for rx 460?

yes, ofc. You will get 2MH/s easily. PM me if you need some advice.

[Munhenhos]

Just a question @doktor83, i have only used the SRBPolaris to flash my cards, but GPU-Z shows me unknown values, is that right?
Any way to fix this?

EDIT: So i fixed it but not with SRB but with PBE, any way to locate the problem at hand from my side?

With Regards

did you patch your drivers?
Make sure your GPU is well feed when you overclock it. Sometimes using sata to 6pins isn't enough. I had this problem on an old build with a corsair 600W. Only had one 6 pins connect and i had to use adapters and they didn't supply enough power.

[Munhenhos]

The latest version of SRB PolarisV3 was recognized by Windows Defender to have a Trojan "win32/fuery.B!cl" in the SRBPolaris.exe file. See this image file for details: http://imgur.com/ybJ2Dcm

OP: can you please explain why you are inserting Trojan file in your program?

Admins: please flag this program, as it may contain Trojan files.

Read the thread. And delete your post.
Thanks!

Just deleted my post. Still having issues with using this tool though, as it asks me to install dot NET 3.5 and I am unable to install it. See my other post for details. Did you have similar issues?

 try this one
https://www.microsoft.com/pt-pt/download/details.aspx?id=30653

[flamefaker]

@baracuda yeah well that did solve my issue for that 1 GPU at least 

@Munhenhos i bought for those GPUs a Server PSU with 2400W i think this should be enough for 6 GPUs or am i wrong?

for now, the only thing left for me to do is to get claymore to work with 6 GPUs in Win10 without the AMD Driver not installing properly. Kudos for the great program doktor83!

With Regards

[doktor83]

@baracuda yeah well that did solve my issue for that 1 GPU at least 

@Munhenhos i bought for those GPUs a Server PSU with 2400W i think this should be enough for 6 GPUs or am i wrong?

for now, the only thing left for me to do is to get claymore to work with 6 GPUs in Win10 without the AMD Driver not installing properly. Kudos for the great program doktor83!

With Regards

I am glad it sorted out for you in the end 

[Frozentear]

All 3 versions downloaded on mega (3; 2.66; 2.65) contain the virus. My PC regularly extremely lagging on the Internet by ~24+ hours after power-up, but after the program was uninstalled everything went fine.

How did you "install" and "deinstall" program that doesn't have installer and deinstaller?
Did just fact that it sat in some directory made your PC lagging?

Translator made a mistake, I just deleted.
All problems are gone as the program was deleted. Old versions (e.g. 2.2) by the way did not have problems.

[Branko]

All 3 versions downloaded on mega (3; 2.66; 2.65) contain the virus. My PC regularly extremely lagging on the Internet by ~24+ hours after power-up, but after the program was uninstalled everything went fine.

How did you "install" and "deinstall" program that doesn't have installer and deinstaller?
Did just fact that it sat in some directory made your PC lagging?

Translator made a mistake, I just deleted.
All problems are gone as the program was deleted. Old versions (e.g. 2.2) by the way did not have problems.

Still doesn't make sense...IF it would be virus it would inject some code elsewhere and take control of your PC.
Simply deleting it would do nothing, malicious code would still be there

[greatauror28]

Okay, it's no easy feat reading 21 pages of this thread but I find it interesting and probably worth a try.
It's very opportune that I found this after a morning of frustration updating to "AMD blockchain driver" that promises to return Polaris cards to earlier DAG hash rates. I guess all knows that you can't OC/undervolt in Claymore anymore when you updated to this driver, hence my frustration.

I've been using PBE since I started mining 6 weeks ago and just now that I realized that this is a completely different version, well not totally, but it packs more features like default gpu and core clock and voltage offsets.

I will be trying this tomorrow with my Asus Dual OC Rx580 and report back.

Fingers crossed! 

[doktor83]

You can use Afterburner 4.4.0 Beta 16 to control voltage on the dag fix drivers.
If not working, try the latest Trixx.
One of these should work