ASICMINER Auction: 50 Block Erupter Blades CHECK OP FOR PAYMENT

[lenny_]

Just to confirm, you see a solid 178.00 shares/minute always? I have never seen that ever, but I think mostly its because of stales pulling down the accepted efficiency.

Could you paste one of your outputs from the webpage?

Total MHS:   13046
Received:   0000091550
Accepted:   0000091170
Per Minute:   178.29
Efficiency:   099.58%
Up Time:   0d,08h,31m,21s

Total MHS:   13022
Received:   0000091634
Accepted:   0000091080
Per Minute:   177.94
Efficiency:   099.39%
Up Time:   0d,08h,31m,50s

Damn lenny, that 99.98 is sexual. For some reason I haven't seen either blade go over 24 hours. It either says its restarted, or it is actually restarting roughly once a day. Not got the new cooling on yet, but its hardly hot and its typically restarting at cool times of the day/night.

Mine units just go over 1 day. Look at the stats

Code:

Total MHS:	13090
Received:	0000259979
Accepted:	0000259447
Per Minute:	178.88
Efficiency:	099.79%
Up Time:	1d,00h,10m,23s

Code:

Total MHS:	13082
Received:	0000260026
Accepted:	0000259302
Per Minute:	178.72
Efficiency:	099.72%
Up Time:	1d,00h,10m,49s

I hope to do record in uptime and Efficiency

[1713961222]

1713961222

[1713961222]

1713961222

[1713961222]

1713961222

[dogie]

Yep I was being silly. Was turning main computer off assuming it would move to my backup stratum proxy on laptop and it wasn't! Hence it was restarting when I turned main comp back on.

[tigerfree]

i wish i have 50 BTC to buy 1 .

[dogie]

Bought 2 more from batch 3.5, and remounted the originals. Was buying a shitty desktop shelf unit made of cardboard and it all just fit so well in the drawers!



At least an inch gap at the back, with the black fans blowing both behind the blades and across the front. Cool to the touch now.

[Caesium]

Anyone else want to share their ROI so far?

I'm at 7%. Getting rather worried about these difficulty increases though and the thought of selling on has actually crossed my mind. I watch the things like a hawk to make sure the pool they're on hasn't died, or my Inet hasn't dropped out, or the stratum proxy isn't misbehaving, and realising I need to do this for at least another 100 days

[drlatino999]

Anyone else want to share their ROI so far?

I'm at 7%. Getting rather worried about these difficulty increases though and the thought of selling on has actually crossed my mind. I watch the things like a hawk to make sure the pool they're on hasn't died, or my Inet hasn't dropped out, or the stratum proxy isn't misbehaving, and realising I need to do this for at least another 100 days

I did my math with 9.9% difficulty increases every 14 days, I came up with 113 days.

[drlatino999]

Just to confirm, you see a solid 178.00 shares/minute always? I have never seen that ever, but I think mostly its because of stales pulling down the accepted efficiency.

Could you paste one of your outputs from the webpage?

Total MHS:   13046
Received:   0000091550
Accepted:   0000091170
Per Minute:   178.29
Efficiency:   099.58%
Up Time:   0d,08h,31m,21s

Total MHS:   13022
Received:   0000091634
Accepted:   0000091080
Per Minute:   177.94
Efficiency:   099.39%
Up Time:   0d,08h,31m,50s

Damn lenny, that 99.98 is sexual. For some reason I haven't seen either blade go over 24 hours. It either says its restarted, or it is actually restarting roughly once a day. Not got the new cooling on yet, but its hardly hot and its typically restarting at cool times of the day/night.

Mine units just go over 1 day. Look at the stats

Code:

Total MHS:	13090
Received:	0000259979
Accepted:	0000259447
Per Minute:	178.88
Efficiency:	099.79%
Up Time:	1d,00h,10m,23s

Code:

Total MHS:	13082
Received:	0000260026
Accepted:	0000259302
Per Minute:	178.72
Efficiency:	099.72%
Up Time:	1d,00h,10m,49s

I hope to do record in uptime and Efficiency

I wish I could get 98% efficiency for more than 8 hours at a time, I'm back at 91-94% full time and starting to think it's an ISP/location issue.

[pornluver]

When will the next auction be?

[SmiGueL]

When will the next auction be?

This was the next auction:
https://bitcointalk.org/index.php?topic=201753.0
_{(already finished)}

But the Blades are now for sale here @ BTC49.99 or less if you buy more
https://bitcointalk.org/index.php?topic=204030.msg2132683#msg2132683

Almost immediate shipping! (read the OP for details)

[Jimmy2011]

I will get 2 blades from the 3.5th auction, and now I am not sure whether they will be shipped with power supply units for the blades. Could someone who has obtained the blades please confirm it for me?

I just found a switching regulator DRP-240-24 from my friend, 24V * 10A, so it will be suitable for my 2 blades?

Thanks.

[candoo]

I will get 2 blades from the 3.5th auction, and now I am not sure whether they will be shipped with power supply units for the blades. Could someone who has obtained the blades please confirm it for me?

I just found a switching regulator DRP-240-24 from my friend, 24V * 10A, so it will be suitable for my 2 blades?

Thanks.

NO Power supply units. Buy them yourself.

[candoo]

I will get 2 blades from the 3.5th auction, and now I am not sure whether they will be shipped with power supply units for the blades. Could someone who has obtained the blades please confirm it for me?

I just found a switching regulator DRP-240-24 from my friend, 24V * 10A, so it will be suitable for my 2 blades?

Thanks.

NO Power supply units. Buy them yourself. Next time: Read before buying!

[TiuraZ]

I will get 2 blades from the 3.5th auction, and now I am not sure whether they will be shipped with power supply units for the blades. Could someone who has obtained the blades please confirm it for me?

I just found a switching regulator DRP-240-24 from my friend, 24V * 10A, so it will be suitable for my 2 blades?

Thanks.

I think they require 12V, not 24.

[Caesium]

yes 12V @ 10A per blade.

While you *could* run the blades in series on that, giving each of them 12V @ 10A, I really wouldn't recommend it.

Most people get a decent ATX PSU with enough amps on a 12V rail and use the PCI-e plugs - works fine for my 4.

[Jimmy2011]

I will get 2 blades from the 3.5th auction, and now I am not sure whether they will be shipped with power supply units for the blades. Could someone who has obtained the blades please confirm it for me?

I just found a switching regulator DRP-240-24 from my friend, 24V * 10A, so it will be suitable for my 2 blades?

Thanks.

NO Power supply units. Buy them yourself.

Thank you.

[Jimmy2011]

yes 12V @ 10A per blade.

While you *could* run the blades in series on that, giving each of them 12V @ 10A, I really wouldn't recommend it.

Most people get a decent ATX PSU with enough amps on a 12V rail and use the PCI-e plugs - works fine for my 4.

Yes, I also thought about the serial way, but I am worried about my little babies.

I will have a try to put off one of my old computers to get the ATX PSU.

[dogie]

Guide is up if anyone here still needs it:
https://bitcointalk.net/index.php?topic=205369.0

[dogie]

Oops,
https://bitcointalk.org/index.php?topic=205369.0

[blackarrow]

8. Can I submerge the pcb in oil without losing the warranty?
You can submerge it in (non corrosive) oil to cool it. If you handle this correctly its lifespan might be even longer than with fan cooling.

Can you provide more details about how to do this? Submerging in oil will not short circuit the board? Should we submerge the whole blade or only the ASICs? I do not want to risk damaging the blades.

Regards!

[turtle83]

8. Can I submerge the pcb in oil without losing the warranty?
You can submerge it in (non corrosive) oil to cool it. If you handle this correctly its lifespan might be even longer than with fan cooling.

Can you provide more details about how to do this? Submerging in oil will not short circuit the board? Should we submerge the whole blade or only the ASICs? I do not want to risk damaging the blades.

Regards!

http://bit.ly/13WffMJ