My first 8gpu rig 6 pci + 2 pci m.2 need recommendation on PSU

[mewhoyou]

I do agree with you but you mention you have 8gpu on 1000w is something I would like to learn from you. Do you mind sharing the cabling diagram or a pic would do.

I have a plat 1000w with 8 x 8pin but I am worried to push it.

[1714942564]

1714942564

[1714942564]

1714942564

[devkowow]

I do agree with you but you mention you have 8gpu on 1000w is something I would like to learn from you. Do you mind sharing the cabling diagram or a pic would do.

I have a plat 1000w with 8 x 8pin but I am worried to push it.

There is nothing special about it, just connect everything together. Only thing, I am using gtx 1070 with lowered power limit, so they consume only 100-110W.

[dt8666]

I do agree with you but you mention you have 8gpu on 1000w is something I would like to learn from you. Do you mind sharing the cabling diagram or a pic would do.

I have a plat 1000w with 8 x 8pin but I am worried to push it.

There is nothing special about it, just connect everything together. Only thing, I am using gtx 1070 with lowered power limit, so they consume only 100-110W.

When you use 2 psU, the other one you just short the 2 pin to force it to power up? need any 5V load to have full 12V power?

[devkowow]

I use ATX power connector, connects ATXs cables from both PSU and goes into motherboard. So yeah, it just takes 2 pins and joins them together.

[opmac]

What was your actually mobo you used for this setup?

You did not specify anywhere I saw. Thanks

[zaturday_a]

i am new user for mining
just diy PC 20years
the device just run 1 hours OK(8 GPU)
next week online...
today just test.....

and sorry .....
i use 2 X 1000W power
relly use is 800W&700W

http://imgur.com/6hSASYx
http://imgur.com/n2VKzvQ
http://imgur.com/Ew6MeAH
http://imgur.com/YrDTqAF
http://imgur.com/JY8s93G

Hi raxel

i using same motherboard, and you can shared bios setting when plunged M.2 convert to PCIe x4
I have problem on M.2 when i plug not found anything!!!

Please help.

[halker2010]

yo mate wanted to know if can i use m.2 to PCI4 without powered risers ? i currently have 4 gpus on a msi 970 g43 and 1200 power with gpus modded for efficiency wanted to add another.

[sidog]

yo mate wanted to know if can i use m.2 to PCI4 without powered risers ? i currently have 4 gpus on a msi 970 g43 and 1200 power with gpus modded for efficiency wanted to add another.

I haven't tried it myself, but if you want stability, i would power it whenever possible.  just b/c something works right off the bat doesn't mean that it's the best option if you value PEACE OF MIND.