Nvidia 3060 Ti LHR 8G hashrate and power consumptions

[Rickirs]

Hi,

I recently got Nvidia 3060 TI 8G LHR from Zotac . Was reading around and it has been mentioned at most of the places that this card can get 40-42 Mhz with 120 W power consumption with LHR unlocker miner. However, in my case, I can achieve 40 MHz only at 140 W with memory clock +1400 .

If anyone of you using similar card, what is your max hash and what are you power as well as overclock settings.

[waggy459]

Hi,

I recently got Nvidia 3060 TI 8G LHR from Zotac . Was reading around and it has been mentioned at most of the places that this card can get 40-42 Mhz with 120 W power consumption with LHR unlocker miner. However, in my case, I can achieve 40 MHz only at 140 W with memory clock +1400 .

If anyone of you using similar card, what is your max hash and what are you power as well as overclock settings.

I assume you are talking about Eth mining.

Have you tried (or maybe post core clock setting) locked/absolute core clock settings?  This will generally reduce power use.  I can't compare directly but with a 3060LHR on rvn I saved somewhere around 15W just by going with the absolute core clock. 

[swogerino]

Hi,

I recently got Nvidia 3060 TI 8G LHR from Zotac . Was reading around and it has been mentioned at most of the places that this card can get 40-42 Mhz with 120 W power consumption with LHR unlocker miner. However, in my case, I can achieve 40 MHz only at 140 W with memory clock +1400 .

If anyone of you using similar card, what is your max hash and what are you power as well as overclock settings.

Try the following
Core Clock -300
Memory Clock +970
Power Limit 67% (it is a bit lower than 70 needed by NBMiner but seem to work)

With these settings it should do from 39-42 Mhsh but I don't know if the power limit will go below 130 watt,by the way I am talking about NBminer here,I don't know how these settings will behave with other miners.
Give it a try and see what are the results.