turtle83
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2013, 05:49:37 PM |
|
Are you guys running your cgminer as root? That makes me uncomfortable. I get these messages when run as a normal user:
[2013-06-03 13:44:35] USB init open device failed, err -3, you dont have priviledge to access - AMU device 7:3 [2013-06-03 13:44:35] Icarus detect (7:3) failed to initialise (incorrect device?)
When run with sudo, it acts like it didn't detect the block erupter. Any ideas?
https://github.com/ckolivas/cgminer/blob/master/01-cgminer.rulescopy that into your udev rules and restart udev. ^ That takes care of the sudo issue. If you still have issues, then follow along.., Make sure to unplug and plugin the thing again. running cgminer 3.2.0 will unmap the device from the serial interface. Then downgrade to cgminer 3.1.1 (older or newer versions wont work) then start cgminer with following additional arguments --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S /dev/ttyUSB0 -S /dev/ttyUSB1 -S /dev/ttyUSB2 the -S is repeated for each device you got.
|
|
|
|
bitcoindaddy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2013, 05:57:34 PM |
|
Are you guys running your cgminer as root? That makes me uncomfortable. I get these messages when run as a normal user:
[2013-06-03 13:44:35] USB init open device failed, err -3, you dont have priviledge to access - AMU device 7:3 [2013-06-03 13:44:35] Icarus detect (7:3) failed to initialise (incorrect device?)
When run with sudo, it acts like it didn't detect the block erupter. Any ideas?
https://github.com/ckolivas/cgminer/blob/master/01-cgminer.rulescopy that into your udev rules and restart udev. ^ That takes care of the sudo issue. If you still have issues, then follow along.., Make sure to unplug and plugin the thing again. running cgminer 3.2.0 will unmap the device from the serial interface. Then downgrade to cgminer 3.1.1 (older or newer versions wont work) then start cgminer with following additional arguments --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S /dev/ttyUSB0 -S /dev/ttyUSB1 -S /dev/ttyUSB2 the -S is repeated for each device you got. Thanks - I'll try it when I get home.
|
|
|
|
Naelr
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2013, 06:24:00 PM |
|
I got mine today.... all 5 work as expected and was packed very well. Thanks Arklan you did a fine job.
Naelr
|
|
|
|
LazyOtto
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2013, 06:55:03 PM |
|
Are you guys running your cgminer as root? That makes me uncomfortable. I get these messages when run as a normal user:
[2013-06-03 13:44:35] USB init open device failed, err -3, you dont have priviledge to access - AMU device 7:3 [2013-06-03 13:44:35] Icarus detect (7:3) failed to initialise (incorrect device?)
When run with sudo, it acts like it didn't detect the block erupter. Any ideas?
https://github.com/ckolivas/cgminer/blob/master/01-cgminer.rulescopy that into your udev rules and restart udev. ^ That takes care of the sudo issue. ... Another approach might be to add your non-root user account to the group which the devices are in. In my case the group name is "dailout". xx@xxxxxx ~ $ ll /dev/ttyUSB* crw-rw---T 1 root dialout 188, 0 Jun 3 13:52 /dev/ttyUSB0 crw-rw---T 1 root dialout 188, 1 Jun 3 13:51 /dev/ttyUSB1 crw-rw---T 1 root dialout 188, 2 Jun 3 13:52 /dev/ttyUSB2 crw-rw---T 1 root dialout 188, 3 Jun 3 13:51 /dev/ttyUSB3 crw-rw---T 1 root dialout 188, 4 Jun 3 13:51 /dev/ttyUSB4 crw-rw---T 1 root dialout 188, 5 Jun 3 13:52 /dev/ttyUSB5 crw-rw---T 1 root dialout 188, 6 Jun 3 13:51 /dev/ttyUSB6 crw-rw---T 1 root dialout 188, 7 Jun 3 13:52 /dev/ttyUSB7NOTE: I'm not using cgminer. Adding the non-root user to the dialout group is what I did to resolve permissions issues when using MPBM on Raspbian / Debian.
|
|
|
|
HTML5 Gordon
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2013, 07:16:12 PM |
|
Mine is waiting for me at home. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Thanks Arklan.
|
|
|
|
Digigami
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2013, 08:15:10 PM |
|
Fedex International Ground to Canada. Now you can understand why I was annoyed with the muilti-day shipping delays.
this :/ I didn't say anything but I wasn't too please about it either. I ordered from Canary's group buy several days later and it looks like those will show up before the one from this order. Thankfully it's only a single here, and 5 from the other group buy.
|
|
|
|
Photon939
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2013, 09:07:35 PM |
|
Still no usb devices in the mailbox ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
|
|
|
tidus_13
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2013, 09:39:23 PM |
|
Mine arrived today no customs fees or VAT or such , I'm trying to put it working on win7 64bits, cgminer 3.2.0 no success... will try now at 3.1.1 version. The Fedex Envelope had a hole ![Huh](https://bitcointalk.org/Smileys/default/huh.gif) Fedex delivery want to know what was that? ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) but smart arklan had another protected envelope inside. ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fanonymouse.org%2Fcgi-bin%2Fanon-www.cgi%2Fhttp%3A%2F%2Fimg163.imageshack.us%2Fimg163%2F3497%2Fimg0850tq.jpg&t=665&c=ESg9rBlRMlDE8g) ![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fimg20.imageshack.us%2Fimg20%2F4073%2Fimg0854u.jpg&t=665&c=Xrw3k-LMTu3KFQ) @arklan i want to know how many $ you had to pay for my ship + customs and duties , as i said before i only accepted to pay if was <= 2,50 BTC for all. I know you may paid more than this... If so send me a address to pay the difference to 2.50 BTC. About the warranty devices i would suggest arklan to mine with them, and maybe someone said before after 6 months divide 500+ USB devices - minus handle fee electricity, or simply goes to arklan, and more fast we can trade the minimum of 10 bad units.
|
|
|
|
arklan (OP)
Legendary
Offline
Activity: 1778
Merit: 1008
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2013, 10:17:57 PM |
|
don't worry about it tidus. the shipping and customs, i mean.
others: argh. i feel i did horribly. all i can do is apologize and offer some btc to compensate. pm me if you want to talk about it.
photon: seems likely the random five are yours then. i have some defectives to mail out, and the last order actual order as well. i'll get yours included.
however, should you get a package... let me know.
|
i don't post much, but this space for rent.
|
|
|
HTML5 Gordon
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2013, 10:39:02 PM Last edit: June 04, 2013, 12:28:49 AM by HTML5 Gordon |
|
Just got mine set up and happily hashing away on my Mac with BitMinter. ![Cool](https://bitcointalk.org/Smileys/default/cool.gif) Currently getting about 336 Mhps.
|
|
|
|
Tranz
Legendary
Offline
Activity: 1540
Merit: 1060
May the force bit with you.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2013, 10:55:33 PM |
|
Got mine too! 1 driver later and boom bitminter is hashing away with them.
Thanks Arklan. I know this was rough for you, but I think you did a nice job!
|
|
|
|
bitcoindaddy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2013, 11:33:02 PM |
|
Are you guys running your cgminer as root? That makes me uncomfortable. I get these messages when run as a normal user:
[2013-06-03 13:44:35] USB init open device failed, err -3, you dont have priviledge to access - AMU device 7:3 [2013-06-03 13:44:35] Icarus detect (7:3) failed to initialise (incorrect device?)
When run with sudo, it acts like it didn't detect the block erupter. Any ideas?
https://github.com/ckolivas/cgminer/blob/master/01-cgminer.rulescopy that into your udev rules and restart udev. ^ That takes care of the sudo issue. If you still have issues, then follow along.., Make sure to unplug and plugin the thing again. running cgminer 3.2.0 will unmap the device from the serial interface. Then downgrade to cgminer 3.1.1 (older or newer versions wont work) then start cgminer with following additional arguments --icarus-options 115200:1:1 --icarus-timing 3.0=100 -S /dev/ttyUSB0 -S /dev/ttyUSB1 -S /dev/ttyUSB2 the -S is repeated for each device you got. Bolded above... apparently if you test cgminer 3.2.0, it won't work at all after that, even after switching back to 3.1.1. You have to replug the device. Thanks for the help.
|
|
|
|
logicbomb666
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2013, 12:56:31 AM |
|
Received my product today, got it hashing within minutes (cgminer 3.1.0, win 7 x64).
Big thanks to Arklan and John K for their amazing work in this group buy!
|
I think snare rolls should be used as a currency.
|
|
|
doubledave
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2013, 03:43:15 AM |
|
My local mail courier didn't bother to ring the doorbell today and it is for a package that I need to sign for. So he left a card in my mailbox telling me I can go to the postoffice tomorrow to pick it up. ![Undecided](https://bitcointalk.org/Smileys/default/undecided.gif) A question for those of you running these block erupters on their raspberry pi: Where in /dev/ do you find these? Is it /dev/ttyUSB1 or /dev/bus/usb/ or somewhere like that? Does some driver need to be installed for them to show up? I plan on trying to use bfgminer first with the -S all option.
|
|
|
|
Dunkelheit667
Legendary
Offline
Activity: 1045
Merit: 1157
no degradation
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2013, 04:05:26 AM |
|
... A question for those of you running these block erupters on their raspberry pi: Where in /dev/ do you find these? Is it /dev/ttyUSB1 or /dev/bus/usb/ or somewhere like that? Does some driver need to be installed for them to show up? I plan on trying to use bfgminer first with the -S all option.
They will show up as /dev/ttyUSBx. No need to install a driver, the USB2Serial driver is preinstalled on a rpi. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
"And the machine keeps pushing time through the cogs, like paste into strings into paste again, and only the machine keeps using time to make time to make time. And when the machine stops, time is an illusion that we created free will." - an unnamed Hybrid
|
|
|
doubledave
Newbie
Offline
Activity: 21
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2013, 04:57:53 AM |
|
They will show up as /dev/ttyUSBx. No need to install a driver, the USB2Serial driver is preinstalled on a rpi. Thanks.
|
|
|
|
wariner
Legendary
Offline
Activity: 1250
Merit: 1004
pool.sexy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2013, 05:37:09 AM |
|
received! thank you very much! I have a problem with cgminer (ubuntu 12.04) [2013-06-03 16:35:49] Started cgminer 3.2.0 [2013-06-03 16:35:50] USB init open device failed, err -3, you dont have privil edge to access - AMU device 1:6 [2013-06-03 16:35:50] Icarus detect (1:6) failed to initialise (incorrect devic e?) [2013-06-03 16:35:50] No devices detected! [2013-06-03 16:35:50] Waiting for USB hotplug devices or press q to quit [2013-06-03 16:35:50] Need to specify at least one pool server. Input server details. URL:
I do not understand ... thanks for the help ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
Pool.sexy - Pool ETH-ETC-EXP-UBQ-ZEC-DBIX..and more low fee Discussionmy BTC: 1KiMpRAWscBvhRgLs8jDnqrZEKJzt3Ypfi
|
|
|
arklan (OP)
Legendary
Offline
Activity: 1778
Merit: 1008
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2013, 05:38:47 AM |
|
received! thank you very much! I have a problem with cgminer (ubuntu 12.04) [2013-06-03 16:35:49] Started cgminer 3.2.0 [2013-06-03 16:35:50] USB init open device failed, err -3, you dont have privil edge to access - AMU device 1:6 [2013-06-03 16:35:50] Icarus detect (1:6) failed to initialise (incorrect devic e?) [2013-06-03 16:35:50] No devices detected! [2013-06-03 16:35:50] Waiting for USB hotplug devices or press q to quit [2013-06-03 16:35:50] Need to specify at least one pool server. Input server details. URL:
I do not understand ... thanks for the help ![Wink](https://bitcointalk.org/Smileys/default/wink.gif) 3.2 is having issues for all of us.
|
i don't post much, but this space for rent.
|
|
|
Blockhead
Newbie
Offline
Activity: 27
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2013, 06:25:27 AM |
|
Got my USB miner in the mail today and I have it up and running with bfgminer 3.0.2. Thanks Arklan! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif)
|
|
|
|
wariner
Legendary
Offline
Activity: 1250
Merit: 1004
pool.sexy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2013, 06:26:12 AM |
|
3.2 is having issues for all of us.
Good! ![Cheesy](https://bitcointalk.org/Smileys/default/cheesy.gif) With 3.1.1 "-S all" [2013-06-04 08:25:02] Started cgminer 3.1.1 [2013-06-04 08:25:02] Started cgminer 3.1.1 [2013-06-04 08:25:03] Icarus Detect: Failed to open all [2013-06-04 08:25:03] Need to specify at least one pool server. Input server details. URL:
![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
|
Pool.sexy - Pool ETH-ETC-EXP-UBQ-ZEC-DBIX..and more low fee Discussionmy BTC: 1KiMpRAWscBvhRgLs8jDnqrZEKJzt3Ypfi
|
|
|
|