All Shares Rejected

[kjr2686]

I'm new to this. I studies for a long time to get everything right and I'm running into a wall. I'm sure whatever i'm missing is something staring me in the face, but here it goes..

I am using claymore. I have the 15.xx version of my GPU driver installed. Here is what pops up in my miner, I cant figure it out.

C:\Users\Ken\Desktop\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5 - Catalyst 15.12-17.x - CUDA 8.0_7.5_6.5\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5>EthDcrMiner64.exe -epool us1.ethermine.org:4444 -mode 1 -allpools 1 -ewal 8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 -epsw x

╔════════════════════════════════════════════════════════════════╗
║      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.5      ║
╚════════════════════════════════════════════════════════════════╝

ETH: 1 pool is specified
Main Ethereum pool is us1.ethermine.org:4444

Catalyst 15.12 is REQUIRED for best performance and compatibility
For Polaris cards, use latest drivers
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
OpenCL initializing...

AMD Cards available: 1
GPU #0: Fiji, 4096 MB available, 64 compute units
GPU #0 recognized as Fury X/Nano
POOL/SOLO version
GPU #0: algorithm ASM
No NVIDIA CUDA GPUs detected.
Total cards: 1
ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
ETH: Stratum - Connected (us1.ethermine.org:4444)
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
ETH: Stratum - Connected (us1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...

If i leave it running, it will just keep rejecting shares.. What do I do here?

[1714002518]

1714002518

[1714002518]

1714002518

[1714002518]

1714002518

[1714002518]

1714002518

[zend7]

I'm new to this. I studies for a long time to get everything right and I'm running into a wall. I'm sure whatever i'm missing is something staring me in the face, but here it goes..

I am using claymore. I have the 15.xx version of my GPU driver installed. Here is what pops up in my miner, I cant figure it out.

C:\Users\Ken\Desktop\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5 - Catalyst 15.12-17.x - CUDA 8.0_7.5_6.5\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5>EthDcrMiner64.exe -epool us1.ethermine.org:4444 -mode 1 -allpools 1 -ewal 8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 -epsw x

╔════════════════════════════════════════════════════════════════╗
║      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.5      ║
╚════════════════════════════════════════════════════════════════╝

ETH: 1 pool is specified
Main Ethereum pool is us1.ethermine.org:4444

Catalyst 15.12 is REQUIRED for best performance and compatibility
For Polaris cards, use latest drivers
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
OpenCL initializing...

AMD Cards available: 1
GPU #0: Fiji, 4096 MB available, 64 compute units
GPU #0 recognized as Fury X/Nano
POOL/SOLO version
GPU #0: algorithm ASM
No NVIDIA CUDA GPUs detected.
Total cards: 1
ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
ETH: Stratum - Connected (us1.ethermine.org:4444)
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
ETH: Stratum - Connected (us1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...

If i leave it running, it will just keep rejecting shares.. What do I do here?

First you need to move this topic to the appropriate section the MINING ALTCOINS section herehttps://bitcointalk.org/index.php?board=160.0 as there this topic will be read by users who do mining. I also suggest you try to mine with Nicehash software to see if it is a problem of configuration. If with Nicehash it works, then you have configured your batch file in a wrong way or with some errors. But better you get help at the section of mining altcoin, use move topic at the bottom left of the page to move your topic there.

[Ahead]

I'm new to this. I studies for a long time to get everything right and I'm running into a wall. I'm sure whatever i'm missing is something staring me in the face, but here it goes..

I am using claymore. I have the 15.xx version of my GPU driver installed. Here is what pops up in my miner, I cant figure it out.

C:\Users\Ken\Desktop\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5 - Catalyst 15.12-17.x - CUDA 8.0_7.5_6.5\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.5>EthDcrMiner64.exe -epool us1.ethermine.org:4444 -mode 1 -allpools 1 -ewal 8d81500bc8547fdeff2d89f57d3ad8f611230edf3868b5b31aabbf1e917083bd.rig1 -epsw x

╔════════════════════════════════════════════════════════════════╗
║      Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.5      ║
╚════════════════════════════════════════════════════════════════╝

ETH: 1 pool is specified
Main Ethereum pool is us1.ethermine.org:4444

Catalyst 15.12 is REQUIRED for best performance and compatibility
For Polaris cards, use latest drivers
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
OpenCL initializing...

AMD Cards available: 1
GPU #0: Fiji, 4096 MB available, 64 compute units
GPU #0 recognized as Fury X/Nano
POOL/SOLO version
GPU #0: algorithm ASM
No NVIDIA CUDA GPUs detected.
Total cards: 1
ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
ETH: Stratum - Connected (us1.ethermine.org:4444)
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
ETH: Stratum - Connected (us1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...

If i leave it running, it will just keep rejecting shares.. What do I do here?

Hi,

I think your Eth address is wrong... it should be something like 0x...........
That's why pool is closing the connection on you ---> Socket was closed remotely (by pool)
Your's looks to big to me... Check it out!
 

[alani123]

Indeed the ethereum address in the config you're running the miner with seems invalid and could very well be the reason the pool diconnects. Try setting a valind ETH address and see how it goes.

[crypticj]

Indeed the ethereum address in the config you're running the miner with seems invalid and could very well be the reason the pool diconnects. Try setting a valind ETH address and see how it goes.

Yep Incorrect address format.

[kjr2686]

thanks everyone. I noticed it as soon as i put up this thread. I knew is was something retarded.

[orcmaster]

hey guys similar error but i actually have the correct Ether wallet from myetherwallet site directly can someone help me out and let me know why it is not working I got nicehash working so not sure why this is not ill post my code and the error i get for you guys to see thanks



setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100


EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x755B0D8310F977c2427AfF530D44DDa0F0049D32/ orc

THIS IS THE ERROR I GET _______________________________________________________________

This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-eu2.nanopool.org removed from the list
This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-us-east1.nanopool.org removed from the list
This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-us-west1.nanopool.org removed from the list
This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-asia1.nanopool.org removed from the list
ETH: 1 pool is specified
Main Ethereum pool is eu1.ethermine.org:4444
DCR: 4 pools are specified
Main Decred pool is pasc-eu2.nanopool.org:15555
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: GeForce GTX 970, 4096 MB available, 13 compute units, capability: 5.2

Total cards: 1
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
 DCR: Stratum - connecting to 'pasc-eu2.nanopool.org' <198.251.88.21> port 15555
 DCR: Stratum - Connected (pasc-eu2.nanopool.org:15555)
 DCR: Authorized
 DCR: 10/18/17-16:18:03 - New job from pasc-eu2.nanopool.org:15555
 DCR: 10/18/17-16:18:07 - New job from pasc-eu2.nanopool.org:15555
 DCR: 10/18/17-16:18:09 - New job from pasc-eu2.nanopool.org:15555
ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=73C fan=70%

[Ahead]

hey guys similar error but i actually have the correct Ether wallet from myetherwallet site directly can someone help me out and let me know why it is not working I got nicehash working so not sure why this is not ill post my code and the error i get for you guys to see thanks



setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100


EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x755B0D8310F977c2427AfF530D44DDa0F0049D32/ orc

THIS IS THE ERROR I GET _______________________________________________________________

This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-eu2.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-eu2.nanopool.org removed from the list
This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-us-east1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-us-east1.nanopool.org removed from the list
This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-us-west1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-us-west1.nanopool.org removed from the list
This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.This pool (eth-asia1.nanopool.org) does not support Ethereum addresses as login (or requires worker name in "Login.Worker" format) and cannot be used for devfee mining, therefore it is not supported.
However, you can mine on this pool if you specify "-allpools 1" option, default pools (different from this pool) will be used for devfee.
Please read "Readme" file for details.Pool eth-asia1.nanopool.org removed from the list
ETH: 1 pool is specified
Main Ethereum pool is eu1.ethermine.org:4444
DCR: 4 pools are specified
Main Decred pool is pasc-eu2.nanopool.org:15555
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...

NVIDIA Cards available: 1
CUDA Driver Version/Runtime Version: 9.0/8.0
GPU #0: GeForce GTX 970, 4096 MB available, 13 compute units, capability: 5.2

Total cards: 1
DUAL MINING MODE ENABLED: ETHEREUM+DECRED
ETH: eth-proxy stratum mode
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
 DCR: Stratum - connecting to 'pasc-eu2.nanopool.org' <198.251.88.21> port 15555
 DCR: Stratum - Connected (pasc-eu2.nanopool.org:15555)
 DCR: Authorized
 DCR: 10/18/17-16:18:03 - New job from pasc-eu2.nanopool.org:15555
 DCR: 10/18/17-16:18:07 - New job from pasc-eu2.nanopool.org:15555
 DCR: 10/18/17-16:18:09 - New job from pasc-eu2.nanopool.org:15555
ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.220.188> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
ETH: Share rejected!
Socket was closed remotely (by pool)
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=73C fan=70%

Correct format:

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal 0x755B0D8310F977c2427AfF530D44DDa0F0049D32.YOURWORKER -epsw x

[orcmaster]

Thank you sir i got it now