[ANN] Denarius [D] - First "Tribus" PoW/PoS Hybrid Masternodes, Ring Sigs

[AltScope]

I cannot sync with the network either.  Out-of-date blocks is nearly 17000 at this point.  I can connect to 15 other users yet watch the out-of-date blocks tick up every minute.  Everything was working fine and staking until the fork.
Downloaded v3.3.3 and deleted the Peers.dat file.  UPnP is checked and it shows as active on my router's UPnP list.  Are there additional ports I need to open?  I had to manually do so when BitBean updated a few months back.

Only thing I haven't tried is starting fresh with v3.3.3 from a wallet backup.  Don't want to wait a day re-downloading the chain if I can avoid it.  Any suggestions would be welcomed.  Thanks.

I'm also having a lot of issues

downloaded latest wallet and tried syncing but it stalled for sa few hours
resynced using the blockchain data from github
setup vps in the same way using the blockchain and changed conf files for fortuna
unlock wallet for pos
started fortuna and it ran for an hour before stopping
restarted desktop wallet and it crashes at verifying database
resynced chain using blockchain from github
wallet started, unlocked for pos
started fortuna and it ran for about 12 hours before stopping
just restarted desktop wallet and it crashes at verifying database

edit:
gone through a resync again and sent my coins to a new wallet file. it seems to be ok now, I've restarted it a couple of times without issue

Same.  After so many smooth upgrades, this is a bit of a disappointment.  Just can't seem to finish synching up.

The new wallet release is working well for me after I did what Carsen said a few posts back about grabbing the chaindata1451336 and removing my old peers.dat. I then restarted the wallet and it was syncing without any issues and is fully synced so maybe you guys can try this. I got the chain data from the discord.

that's what I was doing mate, third time was the charm though

scratch that just tried to setup my masternode so restarted the wallet and its back to crashing at verifying integrity 

[1713545014]

1713545014

[1713545014]

1713545014

[1713545014]

1713545014

[KougarLOB]

I cannot sync with the network either.  Out-of-date blocks is nearly 17000 at this point.  I can connect to 15 other users yet watch the out-of-date blocks tick up every minute.  Everything was working fine and staking until the fork.
Downloaded v3.3.3 and deleted the Peers.dat file.  UPnP is checked and it shows as active on my router's UPnP list.  Are there additional ports I need to open?  I had to manually do so when BitBean updated a few months back.

Only thing I haven't tried is starting fresh with v3.3.3 from a wallet backup.  Don't want to wait a day re-downloading the chain if I can avoid it.  Any suggestions would be welcomed.  Thanks.

I'm also having a lot of issues

downloaded latest wallet and tried syncing but it stalled for sa few hours
resynced using the blockchain data from github
setup vps in the same way using the blockchain and changed conf files for fortuna
unlock wallet for pos
started fortuna and it ran for an hour before stopping
restarted desktop wallet and it crashes at verifying database
resynced chain using blockchain from github
wallet started, unlocked for pos
started fortuna and it ran for about 12 hours before stopping
just restarted desktop wallet and it crashes at verifying database

edit:
gone through a resync again and sent my coins to a new wallet file. it seems to be ok now, I've restarted it a couple of times without issue

Same.  After so many smooth upgrades, this is a bit of a disappointment.  Just can't seem to finish synching up.

The new wallet release is working well for me after I did what Carsen said a few posts back about grabbing the chaindata1451336 and removing my old peers.dat. I then restarted the wallet and it was syncing without any issues and is fully synced so maybe you guys can try this. I got the chain data from the discord.

that's what I was doing mate, third time was the charm though

scratch that just tried to setup my masternode so restarted the wallet and its back to crashing at verifying integrity 

Backed-up the wallet file and wiped out the Downloaded Files folder.  Downloaded the whole chain again.  So now I'm up-to-date and available to stake but it's still isn't.  I used to see several stakes a day.  As of now I haven't staked since December 4th.  Was working just fine two weeks ago.  I have to restart the wallet (exit, reopen) every few hours in order to stay up to date.

[Rabinovitch]

Same.  After so many smooth upgrades, this is a bit of a disappointment.  Just can't seem to finish synching up.

v3.3.3 is syncing so slowwwwwwwww..... In spite that it has 16 active connections to the network... Is there any fix for this?

[AltScope]

daemon crashing on vps, been leaving the qt open rather than having issues after shutdown still no pos rewards. No fortuna rewards in over 24 hours listed as expired logged into vps and the service is not running 2nd time now 

[kingcarsen]

Same.  After so many smooth upgrades, this is a bit of a disappointment.  Just can't seem to finish synching up.

v3.3.3 is syncing so slowwwwwwwww..... In spite that it has 16 active connections to the network... Is there any fix for this?

We have a long blockchain now, it is recommended that you grab the chaindata


Also if you want to test out the latest wallet v3.3.4 you can grab it from our v3.4 branch on our Github or the Win64 QT from our Discord under our pinned messages in the #wallets channel. We will officially release it later on, we are still testing it, but some have had better luck with it overall compared to v3.3.3

[KougarLOB]

I can confirm that Windows wallet v3.3.4 works.  Simply replaced the EXE in my folder file and claimed a stake within 30 seconds of relaunching the wallet.    Waiting for confirmations.
Three minutes open and I have 27 connections.  Only averaged 15-17 on 3.3.3.

Thank you, Gentlemen.

[ruplikminer]

anyone with a working discord invitation?

[kingcarsen]

anyone with a working discord invitation?

https://discord.gg/UPpQy3n

Hope to see ya there!

[buzzkillb]

3.3.4 for sure works better, and also PoS is working on that version. One thing to try on the VPS might be a cronjob that stops and starts the wallet after so many hours.

[kingcarsen]

3.3.4 for sure works better, and also PoS is working on that version. One thing to try on the VPS might be a cronjob that stops and starts the wallet after so many hours.

Good to know! We hopefully will have a super stable version soon.

[AltScope]

3.3.4 for sure works better, and also PoS is working on that version. One thing to try on the VPS might be a cronjob that stops and starts the wallet after so many hours.

that'd keep the wallet running sure, would you not still need to open your desktop wallet to actually start the masternode though?

will give 3.3.4 a go in a bit. tbf the rewards when working are much better than they were hoping for a more stable version soon.

[buzzkillb]

3.3.4 for sure works better, and also PoS is working on that version. One thing to try on the VPS might be a cronjob that stops and starts the wallet after so many hours.

that'd keep the wallet running sure, would you not still need to open your desktop wallet to actually start the masternode though?

will give 3.3.4 a go in a bit. tbf the rewards when working are much better than they were hoping for a more stable version soon.

The hot wallet can be open or closed during the cronjob. Doesn't matter as when the cold wallet restarts it picks up the active status on its own.

Looks like enkayz latest changes on v3.4 branch may have fixed the syncing issue. Haven't had any cold wallets lose sync today, and it was happening randomly often enough. Can anyone git checkout v3.4, git pull, compile and try?

[kingcarsen]

3.3.4 for sure works better, and also PoS is working on that version. One thing to try on the VPS might be a cronjob that stops and starts the wallet after so many hours.

that'd keep the wallet running sure, would you not still need to open your desktop wallet to actually start the masternode though?

will give 3.3.4 a go in a bit. tbf the rewards when working are much better than they were hoping for a more stable version soon.

The hot wallet can be open or closed during the cronjob. Doesn't matter as when the cold wallet restarts it picks up the active status on its own.

Looks like enkayz latest changes on v3.4 branch may have fixed the syncing issue. Haven't had any cold wallets lose sync today, and it was happening randomly often enough. Can anyone git checkout v3.4, git pull, compile and try?

Yup git pull our v3.4 branch and let us know how it runs for you. We are on v3.3.5 now with probably another few version increments until official release and merge to our master branch.

Thank you Denarius community!

[kingcarsen]

Denarius v3.3.6 is currently in testing and development.

You can grab a pre-release from here: https://github.com/carsenk/denarius/releases/download/v3.3.6/Denarius-v3.3.6-Win64-Test.zip

You can also git checkout v3.4 and then git pull to pull the latest code for your daemon nodes until we merge our updates into the master branch. Enjoy!

[maximumcoin]

Denarius v3.3.6 is currently in testing and development.

You can grab a pre-release from here: https://github.com/carsenk/denarius/releases/download/v3.3.6/Denarius-v3.3.6-Win64-Test.zip

You can also git checkout v3.4 and then git pull to pull the latest code for your daemon nodes until we merge our updates into the master branch. Enjoy!

Today, I searched Denarius on coinmarketcap, which shows the symbol D, not DNR.
When the Denarius symbol changed?
And, which types of purposes of the symbol change?

[kingcarsen]

Denarius v3.3.6 is currently in testing and development.

You can grab a pre-release from here: https://github.com/carsenk/denarius/releases/download/v3.3.6/Denarius-v3.3.6-Win64-Test.zip

You can also git checkout v3.4 and then git pull to pull the latest code for your daemon nodes until we merge our updates into the master branch. Enjoy!

Today, I searched Denarius on coinmarketcap, which shows the symbol D, not DNR.
When the Denarius symbol changed?
And, which types of purposes of the symbol change?

We changed it a few months ago, we just had a lot of trolls for using DNR before, and everyone in the community wanted a change of our ticker so we are now $D, Using the ticker D is a bit more SEO friendly too especially if you are searching for D on CMC.

[vnvizow]

So many masternode coins I have to know which ones to trust before I start investing.  Will check the website

also cool it is on nova exchange since I trade their often

[kingcarsen]

So many masternode coins I have to know which ones to trust before I start investing.  Will check the website

also cool it is on nova exchange since I trade their often

Yea not entirely sure if Nova is still up-to-date and the on the latest release, so please be careful. We were listed with them years ago before they became under new ownership.

Also our "masternode" (Fortuna Stake) system is entirely custom in Denarius, Denarius is one of the only cryptos now with a solid Fair Payment System for Fortuna Stakes.

Use CoinExchange as our main exchange until Cryptopia is back or we hear more about their situation: https://www.coinexchange.io/market/d/btc

[pinpins]

 
 You can now mine Denarius and more than 200 coins at new autoexchange mining pool Zergpool.com at 0.5% fee now. Please use following commands for different mining options
 
 Option 1 Auto coin switch by profitability within algorithm with payment to wallet

Code:

 -o stratum+tcp://tribus.mine.zergpool.com:8533 -u <YOURBTCWALLET> -p c=BTC 

 Option 2 Direct coin mining to coin wallet

Code:

 -o stratum+tcp://tribus.mine.zergpool.com:8533 -u <YOURDWALLET> -p c=D,mc=D

 Option 3 Direct coin mining with autoexchange to specified coin wallet

Code:

 -o stratum+tcp://tribus.mine.zergpool.com:8533 -u <YOURBTCWALLET> -p c=BTC,mc=D

 Please note mc stands for mining coin symbol, c stand for payout coin symbol
 
 Autoexchange to BTC, LTC, DASH or any other currency we mine
 Happy mining,
  cheers pinpin

[dreemsjohn]

Address: DLJ145iijFThZHwqJPj7afNomSnwRJRyBs
Hash: 559a560f7fe01e889e39ff0665a29dbb0ac985f3704928aa9efb7cf28abacb73


in wallet
Cтaтyc: 1879 пoдтвepждeний
Дaтa: 27.01.2019 18:13
Для: DLJ145iijFThZHwqJPj7afNomSnwRJRyBs
Дeбeт: -11.63 D
Кoмиccия: -0.00001 D
Чиcтaя cyммa: -11.63001 D
ID тpaнзaкции: 559a560f7fe01e889e39ff0665a29dbb0ac985f3704928aa9efb7cf28abacb73


01/27 06:14 PM   11.63000000        Deposit   Pending (0/40) in southxchange