[ANN] Minereum Token Creation Service - Create your own ERC20 Ethereum Token

[sorinln]

Hi Everyone,

We would like to inform that the price of the Token Creation Service was increased to 50 MNE.

Wow I thought you were killed  
Anyway, 50 x 0.5 = 25. So, with 25$, anyone can create a token. Is very cheap.

[1713571184]

1713571184

[1713571184]

1713571184

[Jcga]

Hi Everyone,

We would like to inform that the price of the Token Creation Service was increased to 50 MNE.

He talks^^

[atchoum6760]

Hi Everyone,

We would like to inform that the price of the Token Creation Service was increased to 50 MNE.

Thank you for updating the project but it misses the hype of the beginning of the adventure hoping that it will come back in the future .

[vvinam]

dev list more exchange, please

[eprocent]

Very interesting project. One question. The new created coin / token will be totally independent of the Minereum as a smartcontract?

[ivan376]

When ETH rises, Minereum will also follow! Its a good thing to buy now

[taibas]

Something the price MNE does not grow at all, there is not enough good news from the developer. Or did everyone switch to ARTE?

[1726dyjo]

I sent 50 MNE to the address 0x41fafb65b1514ce1177287a567002f8978d98205
and my contract was done at the minereum.com.
I opened my myetherwallet, came to "Contract" and pasted in my contract address.
I visited "Interface/ABI ERC20: https://pastebin.com/vfaret2t", copied "RAW Paste Data" and pasted it in "ABI / JSON Interface".
I clicked access and select a function buttons and input the name, symbol, number of tokens to be produced.
I choose private key to access my wallet and then I clicked write button.

I got this message "This is not a valid wallet file".

My current my ether wallet address runs well and I have been using it for a long time.
I don't think myetherwallet account has any problem.

What should I do?
Please help.   

https://i.imgur.com/o7WnigC.png

MINEREUM TOKEN CREATION SERVICE 1.23
V1.23 is now released, ERC23 contracts now supported.

Token Service website: http://tokenservice.minereum.com/
Video Tutorial: https://youtu.be/09EH3RMdxNU (Thanks to shawnlives)

If you are not familiar with Minereum you can read more info here: https://bitcointalk.org/index.php?topic=1867535.0

Minereum Token Creation Service is now live and allows anyone to create a fully compatible ERC20/ERC23 Ethereum Tokens with just a minereum transaction.

---> ERC23 standard is not recommended as not all services are compatible with it yet, if you want to create a fully standard token use ERC20, ERC23 should only be used if you want to experiment with it.

Ethereum Tokens can be created for a variety of reasons:
· To create an ICO
· Add it to an Exchange
· Trade them among friends
· Private use
· Etc.

Before using the service please take note of the following:

1. Always check this post before making a transaction to the service and follow its steps, the MNE price is dynamic and can be changed,
only transactions with the value >= the current price will be valid.
2. This is the first basic experimental version released to the public, our team will monitor it and will release updates if required.
3. DO NOT send transactions to the service from exchanges. You will not be able to Setup your token, transactions should be sent from an address that you have full control.
4. Any Minereum, Ether, or any other Token sent to the Service Address will be automatically destroyed and cannot be recovered.
5. All tokens generated by the service are 18 decimals

Current Price: 50 MNE (Price updated on August 02, 2017)
Token Creation Service Address: 0x41fAfB65B1514Ce1177287A567002f8978d98205

To Generate your Token, follow these steps:

1. Send 50 MNE (or higher) to the address 0x41fAfB65B1514Ce1177287A567002f8978d98205, to create ERC23 Tokens send 50.23 MNE (or any value > 50 with .23)
 1.1 If you don't have Minereum you can buy on the livecoin.net exchange under the symbols MNE/BTC or MNE/ETH, a guide can be found here: http://www.minereum.com/howtobuy
 1.2 The Address you send the transaction from will be the only address that will be able to configure the Token, make sure you have control over it
 1.3 If you don't own an Ethereum wallet you can create one easily at https://myetherwallet.com and the Ethereum Address can be used to receive Minereum
2. After few seconds you will see your transaction in the website http://tokenservice.minereum.com/
3. The transaction will be processed shortly, when all is done the status will be "Done" and your Token Address will be visible in the "Contract Address" Column
 3.1 Note: Delays may occur due to Ethereum Network issues or if any problem in our server, but in normal conditions the whole process takes less than 5 minutes

After this, you are in full control of your Token.

Source Code ERC20: https://pastebin.com/CD6Jas4A
Interface/ABI ERC20: https://pastebin.com/vfaret2t

Source Code ERC23: https://pastebin.com/EVvsGCAz
Interface/ABI ERC23: https://pastebin.com/R1yU1nRN

Next steps are:

1. Add your Token to your Ethereum Wallet or simply use https://myetherwallet.com to interact with it
 1.1 For example using https://myetherwallet.com, access the Contracts Page: https://www.myetherwallet.com/#contracts
 1.2 In the Contract Address field, insert your Contract Address (from http://tokenservice.minereum.com/) and the Interface/ABI provided above.

2. After you are able to Interact with the Contract, call the function SetupToken and set your Token Name, Token Symbol and Supply
  2.1 Only the Address that submitted the Minereum Transaction will be able to use this function
  2.2 This function can only be used once, so make sure the parameters you enter are correct
  2.3 The Total Supply will be attributed to the Address that submitted the Minereum Transaction
  2.4 The Supply decimals conversion is done automatically by the code so you just need to type the supply you wish (For example, 1 Million = 1000000)  

3. Refresh your wallet and you will see your address with your Token balance

4. If you need to add the Custom Token to your wallet use the following settings:
- Token Address: [YourTokenAddress] (from http://tokenservice.minereum.com/)
- Token Symbol: [YourTokenSymbol] (The one used in the setup)
- Token Decimals: 18

You can add it using myetherwallet.com after you open your account.

5. You will automatically have a block explorer available on http://etherscan.io:
https://etherscan.io/token/[YourTokenAddress]

6. If your source code is not automatically verified by therscan.io follow these steps: https://bitcointalk.org/index.php?topic=1867535.msg19630037#msg19630037

We will update this post along the way with more useful info.

[honghaisea]

I sent 50 MNE to the address 0x41fafb65b1514ce1177287a567002f8978d98205
and my contract was done at the minereum.com.
I opened my myetherwallet, came to "Contract" and pasted in my contract address.
I visited "Interface/ABI ERC20: https://pastebin.com/vfaret2t", copied "RAW Paste Data" and pasted it in "ABI / JSON Interface".
I clicked access and select a function buttons and input the name, symbol, number of tokens to be produced.
I choose private key to access my wallet and then I clicked write button.

I got this message "This is not a valid wallet file".

My current my ether wallet address runs well and I have been using it for a long time.
I don't think myetherwallet account has any problem.

What should I do?
Please help.   

MINEREUM TOKEN CREATION SERVICE 1.23
V1.23 is now released, ERC23 contracts now supported.

Token Service website: http://tokenservice.minereum.com/
Video Tutorial: https://youtu.be/09EH3RMdxNU (Thanks to shawnlives)

If you are not familiar with Minereum you can read more info here: https://bitcointalk.org/index.php?topic=1867535.0

Minereum Token Creation Service is now live and allows anyone to create a fully compatible ERC20/ERC23 Ethereum Tokens with just a minereum transaction.

---> ERC23 standard is not recommended as not all services are compatible with it yet, if you want to create a fully standard token use ERC20, ERC23 should only be used if you want to experiment with it.

Ethereum Tokens can be created for a variety of reasons:
· To create an ICO
· Add it to an Exchange
· Trade them among friends
· Private use
· Etc.

Before using the service please take note of the following:

1. Always check this post before making a transaction to the service and follow its steps, the MNE price is dynamic and can be changed,
only transactions with the value >= the current price will be valid.
2. This is the first basic experimental version released to the public, our team will monitor it and will release updates if required.
3. DO NOT send transactions to the service from exchanges. You will not be able to Setup your token, transactions should be sent from an address that you have full control.
4. Any Minereum, Ether, or any other Token sent to the Service Address will be automatically destroyed and cannot be recovered.
5. All tokens generated by the service are 18 decimals

Current Price: 50 MNE (Price updated on August 02, 2017)
Token Creation Service Address: 0x41fAfB65B1514Ce1177287A567002f8978d98205

To Generate your Token, follow these steps:

1. Send 50 MNE (or higher) to the address 0x41fAfB65B1514Ce1177287A567002f8978d98205, to create ERC23 Tokens send 50.23 MNE (or any value > 50 with .23)
 1.1 If you don't have Minereum you can buy on the livecoin.net exchange under the symbols MNE/BTC or MNE/ETH, a guide can be found here: http://www.minereum.com/howtobuy
 1.2 The Address you send the transaction from will be the only address that will be able to configure the Token, make sure you have control over it
 1.3 If you don't own an Ethereum wallet you can create one easily at https://myetherwallet.com and the Ethereum Address can be used to receive Minereum
2. After few seconds you will see your transaction in the website http://tokenservice.minereum.com/
3. The transaction will be processed shortly, when all is done the status will be "Done" and your Token Address will be visible in the "Contract Address" Column
 3.1 Note: Delays may occur due to Ethereum Network issues or if any problem in our server, but in normal conditions the whole process takes less than 5 minutes

After this, you are in full control of your Token.

Source Code ERC20: https://pastebin.com/CD6Jas4A
Interface/ABI ERC20: https://pastebin.com/vfaret2t

Source Code ERC23: https://pastebin.com/EVvsGCAz
Interface/ABI ERC23: https://pastebin.com/R1yU1nRN

Next steps are:

1. Add your Token to your Ethereum Wallet or simply use https://myetherwallet.com to interact with it
 1.1 For example using https://myetherwallet.com, access the Contracts Page: https://www.myetherwallet.com/#contracts
 1.2 In the Contract Address field, insert your Contract Address (from http://tokenservice.minereum.com/) and the Interface/ABI provided above.

2. After you are able to Interact with the Contract, call the function SetupToken and set your Token Name, Token Symbol and Supply
  2.1 Only the Address that submitted the Minereum Transaction will be able to use this function
  2.2 This function can only be used once, so make sure the parameters you enter are correct
  2.3 The Total Supply will be attributed to the Address that submitted the Minereum Transaction
  2.4 The Supply decimals conversion is done automatically by the code so you just need to type the supply you wish (For example, 1 Million = 1000000)  

3. Refresh your wallet and you will see your address with your Token balance

4. If you need to add the Custom Token to your wallet use the following settings:
- Token Address: [YourTokenAddress] (from http://tokenservice.minereum.com/)
- Token Symbol: [YourTokenSymbol] (The one used in the setup)
- Token Decimals: 18

You can add it using myetherwallet.com after you open your account.

5. You will automatically have a block explorer available on http://etherscan.io:
https://etherscan.io/token/[YourTokenAddress]

6. If your source code is not automatically verified by therscan.io follow these steps: https://bitcointalk.org/index.php?topic=1867535.msg19630037#msg19630037

We will update this post along the way with more useful info.

MNE can create token , but no one to answer the question from user now, if there are some body from DEV team can attention the create service that will be good , or some one use MNE to create token but did not succeed， that will take MNE adversely affected, no one will continue to use MNE.

[szafek]

Why i dont see my contract name in etherscan?

[jtran7690]

Hmm my smart contract address has not been completed yet. been more than 10 hours.

Theres another transaction below mine that has also yet to be completed for 3 days.

[bitnod]

Hello, development is dead

no support !! pity ..
50 MNE now + smartcontrat untreated (5 days late)
no intelligent management of the contract.

personally artemine does not interest me ..
just run of value, lost 1er interest of project

welcome to the community "ETH mentality, and neuron handjob .."

do not waste your time here. create a crypto only POS
choose algo who did it's proof
worked hard & earned your hard work

good day

[sakafa_2007@yahoo.com]

Deployment has been stuck for days now. what's going on?

[Fivestar4everMVP]

i wish to use this service to create my ethereum token but am seeing some negative comments here ,
what do you guys advise?
should i go ahead and use this service or should i wait or probably back off?

[yehey]

Check your Ethereum transaction, it could be their network.

[Ryan Dugan]

I like this a lot and think it is averygood idea I just hope it doesn't make it too easy for scammers to make bad coins they just dump for greed and profits and don't care about the community. We don't need anymore of that. I do like that it uses it's own currency and it is nice to see tokens being given more uses.

[yehey]

Did you get an answer for these questions?

Hi, i created an ERC23 Token with the Minereum Token Creation Service. Now i like to add it to an exchange. For example an yobit. There you have to enter some facts about the token:

https://yobit.net/en/addcoin/


Ticker
Algo
Number of blocks
Money Supply
Min commission
Block time
Dev language
Type
secp256k1 ver
Source link (Git)
Explorer
Bitcointalk topic
Email
Comments/Additional Info

Please can somebody help me? 

[jezus]

Did you get an answer for these questions?

Hi, i created an ERC23 Token with the Minereum Token Creation Service. Now i like to add it to an exchange. For example an yobit. There you have to enter some facts about the token:

https://yobit.net/en/addcoin/


Ticker
Algo
Number of blocks
Money Supply
Min commission
Block time
Dev language
Type
secp256k1 ver
Source link (Git)
Explorer
Bitcointalk topic
Email
Comments/Additional Info

Please can somebody help me? 

Source link github you must copy from details your token.

[Fivestar4everMVP]

i wish to use this service to create my ethereum token but am seeing some negative comments here ,
what do you guys advise?
should i go ahead and use this service or should i wait or probably back off?

Please stand by!


Timestamp UTC   TransactionID   From   MNE Sent   Status   Smart Contract Address
23.12.2017 22:38:04   0xe7254d1675bd223b409c4978fe9e891688b1feef8c1c73e5d9b8a4ca86cd6761   0xcfc857ca9305e2cd7e19b81cd68fdf89310cff7b   51.09011183   Compilation Done, Sending for deployment....   In progress
23.12.2017 20:56:34   0xd5b9aa480a43331d14157006af782311df0cffadc14e164f1b6144d62723a3dc   0xb0cf5d9e53f222f93f1a1218ff0b1b3b130b7b63   51   Compilation Done, Sending for deployment....   In progress
23.12.2017 15:38:04   0x5c4ca9e6411d50326dfce87e9613dd70bbcac1877da2bcbcd0dfc99f6ac9c909   0x012a7906c76769f5f1a05438d08e6ad622424c34   50   Compilation Done, Sending for deployment....   In progress
23.12.2017 14:17:04   0x8f6f5e6210781dd99fe22c123ee0a7dbe8d043e0a6c540a0bbe41b1833b1849c   0x6ebdf04bddbef0e84771bff11e2df063533c8455   60   Done   0xe5d33fc146713dd632912b3c5641a235c29ecb92
23.12.2017 05:49:35   0x5cb374e84b0173e14247dee78cb5f9b177b38ab1cb7e9bc358fc887f33566237   23_0x3789c1b739b4e5e279054ae09c1e348577708343   50.23   Done   0xf0e503ec9551f31cec76c0895f304c40537b74ad
22.12.2017 06:41:33   0xa412425ba9036471fae6e628624d8cecbbe06a111d922cbabfcf1f31187fd9c3   23_0x4267bb943bd3eb58e16b7cd7f0b08b0161a0a279   50.23   Compilation Done, Sending for deployment....   In progress
22.12.2017 04:53:33   0x7838c4727e501193713b96e7b857b5f61db74100f9be2e13e798b78d0ba24c45   0xcfc857ca9305e2cd7e19b81cd68fdf89310cff7b   50   Compilation Done, Sending for deployment....   In progress
21.12.2017 21:59:31   0x3289e8ddaf4676a48cebe6d345249caa55a1828466ff0ab2efc4bf2c49f83207   23_0x4267bb943bd3eb58e16b7cd7f0b08b0161a0a279   50.23   Compilation Done, Sending for deployment....   In progress
21.12.2017 21:38:31   0x814126b9a68306b9e41886b120880f8611a4b8fddc5551e928c51a064467582c   23_0xefaa136afe1ed1de7e3fe36c38889ad04d44be5a   50.23   Compilation Done, Sending for deployment....   In progress

This is terrible don´t understand why they didn´t fix it?!

OK, thanks, I will stand by and see what happens in few days or probably weeks, hopefully, all the delayed transactions will be resolved

[aioc]

I'm also looking forward to create a token it's not an ico but for the service locally that I'm going to employ, but from the post coming from one of it's team I will have to wait for a few more days maybe week but hopefully not maybe they are going to have an update but let's see I'm going to follow this thread.