[4+ EH] Slush Pool (slushpool.com); Overt AsicBoost; World First Mining Pool

[allinvain]

Any idea why I cannot get hashing again. I have 2 S9's hooked up and I took one offline for a few hours now when I connect now it says its dead on pool 0 that I have configured for slush and reverts to pool 1 which I have set for Kano. In the antminer settings you can put 3 pools in 0,1 and 2 I even tried different order but no luck. I looked at the stats on my other miner and it shows all 3 as alive.

Thanks

Make sure you spelled the pool's address correctly and that you have a proper worker name set. Also make sure you completely power cycle the S9s cause their firmware is janky and wonky and all sorts of funky junky clunky stuff lol.

[1713513960]

1713513960

[1713513960]

1713513960

[1713513960]

1713513960

[RealHummer]

Any idea why I cannot get hashing again. I have 2 S9's hooked up and I took one offline for a few hours now when I connect now it says its dead on pool 0 that I have configured for slush and reverts to pool 1 which I have set for Kano. In the antminer settings you can put 3 pools in 0,1 and 2 I even tried different order but no luck. I looked at the stats on my other miner and it shows all 3 as alive.

Thanks

Make sure you spelled the pool's address correctly and that you have a proper worker name set. Also make sure you completely power cycle the S9s cause their firmware is janky and wonky and all sorts of funky junky clunky stuff lol.

I jerked around for hours today, power cycled checked the spelling you name it. I finally rebooted my router I have them plugged into and that took care of it. Weird how it worked for Kano but not slushpool.

Thanks for the input

[allinvain]

Any idea why I cannot get hashing again. I have 2 S9's hooked up and I took one offline for a few hours now when I connect now it says its dead on pool 0 that I have configured for slush and reverts to pool 1 which I have set for Kano. In the antminer settings you can put 3 pools in 0,1 and 2 I even tried different order but no luck. I looked at the stats on my other miner and it shows all 3 as alive.

Thanks

Make sure you spelled the pool's address correctly and that you have a proper worker name set. Also make sure you completely power cycle the S9s cause their firmware is janky and wonky and all sorts of funky junky clunky stuff lol.

I jerked around for hours today, power cycled checked the spelling you name it. I finally rebooted my router I have them plugged into and that took care of it. Weird how it worked for Kano but not slushpool.

Thanks for the input

Hmm, yeah that is bizzare. Do you have custom DNS server set in your router? Or some kind of DNS cache system? Maybe also your router's routing table took a dump. Who knows. Glad you got it solved.

[prodia]

Hi guys

Does someone know why Slushpool is still getting namecoins but not giving out rewards for it?

I have seen the same issue, been happening for a month(8/1/2017) on my dashboard, just sent a 2nd message to slushpool feedback as the first one was not answered

We know they are supposed to be converted, but the display has stopped functioning and every block ID is in a "processing" state.

I hope slushpool announces something about it, officially.

[robe.games.ios]

hi, I developed a crypto mining monitor iOS app and would like to add support for Slushpool. I'm not a bitcoin miner and so I'm looking for volunteers to help test its functionality. Basically you can monitor your miner stats with the app. Data will come slushpool API. All readonly properties. Let me know thanks. Here is my app.
 Ethereum Mining Monitor
https://itunes.apple.com/us/app/ethereum-mining-monitor/id1139650210?mt=8

[chupalt]

We just stood up 4 Avalon 741s on slushpool.  Mining around 30 TH/s, but we're seeing a lot of variation in our hashrate (especially during the day). It will be great for awhile and then start to go all over the place.  We have 2 workers setup each with 2 Avalon 741s.  Everything seems to be ok on our end.  Temperatures are in the good range, internet seems to be stable.  I've tried tweaking the minimum difficulty up from the default 128, but that just seemed to make things worse.

Anyone have any ideas where we should focus our troubleshooting?

https://imgur.com/a/3JEIB

[Logan4el]

Check voltage on the psu and socket during drops.

[agismaniax]

in the last 3 days, pool luck is dropping a lot. why? 

[Biffa]

Because luck

[allinvain]

Because luck

Today is his lucky day, cause he gets to learn about mining luck.

@agismaniax - welcome to the great bitcoin lottery!

[bussumseheide]

Todays 65% is extreme low, has slush pool performed this bad in the past ever?

[wavelengthsf]

Todays 65% is extreme low, has slush pool performed this bad in the past ever?

Yes. There are also days when it's luck is higher than 130%. It's all variance. 

[tahoejoe]

I hope its ok to post this type of question here. I do not see any customer service link on the pool site.
I have a payout transaction that is unconfirmed since yesterday, now 24 hours old. Still pending in my wallet.

https://blockchain.info/tx/a99de750f54cf778c0ce5f84ad11fefc0a6f67a972f9025e7089d21f2fa2f87f

Wait it out or how to escalate the issue with slush?

[allinvain]

I hope its ok to post this type of question here. I do not see any customer service link on the pool site.
I have a payout transaction that is unconfirmed since yesterday, now 24 hours old. Still pending in my wallet.

https://blockchain.info/tx/a99de750f54cf778c0ce5f84ad11fefc0a6f67a972f9025e7089d21f2fa2f87f

Wait it out or how to escalate the issue with slush?

Wait it out a bit more. As long as you have a correct payout address it should eventually confirm. They pay almost no fees to the network when sending out payouts so the transactions are prioritized lower by miners (ironic isn't it..lol)

[Thetaj]

Yo guys, what the shit happened to the blocks today? are we getting raped by luck?

[wavelengthsf]

Yo guys, what the shit happened to the blocks today? are we getting raped by luck?

The 150% luck of the day before got us all drunk, and now we're hung over with reality.

[allinvain]

lol it does sound like a crazy question 

As long as you got the right Stratum address and the worker name is correct AND created on the pool side it should all work without any problems.

[Sp3cul8r]

I just hooked up a s9 Antminer and cannot get worker state to turn on my account eventhough the miner has been mining for a couple hours.  I do have the URL correct and the worker correct in the miner.  Please assist it may sound like a crazy question but I cannot figure it out.  Thanks in advance.

Did you hit "Save and Apply" in Cgminer?  Also, just because the miner is making noise doesn't mean that it is mining.  You are labeled as a newbie, so I'm not sure if you understand this concept.  I use Avalon miners and the light on the back of the miner has to be green, not yellow, to denote active mining.  I'm not sure how it works on S9s, but it is probably similar.

[wavelengthsf]

I just hooked up a s9 Antminer and cannot get worker state to turn on my account eventhough the miner has been mining for a couple hours.  I do have the URL correct and the worker correct in the miner.  Please assist it may sound like a crazy question but I cannot figure it out.  Thanks in advance.

Post your Antminer status page screen shot so we can help

[adyb]

Did anyone else notice an unusual delay in sending payments earlier today/last night? The suspicious side of me wonders if this has anything to do with the btc gold fork. I may be way off the mark and it was a technical glitch but the timing is just too convenient for me....