Will this rig works?

[bitken]

PSU 1000w
CPU i3-2130
GPU 7850 x 2 (plugged into Motherboard without risers cable)
MB Asrock Extreme 4 (2x 16x pcie, 2x 1x pcie)
Ram 8GB DDR3 1600
HDD 500GB 7200RPM

I have concern about the GPU plugged into motherboard as I will be opening it for 24H, will it burn my motherboard in the long run?

[1715090771]

1715090771

[1715090771]

1715090771

[1715090771]

1715090771

[1715090771]

1715090771

[Nightlander]

Will these be on the case? Didn't see mention of that.

Personally, have the same motherboard, most likely hotter gpu (tahiti le) and atx midi case with 3 12mm fans in push pull configuration and it doesn't seem to gather that much heat running couple days straight as a miner. But each time I hit the miner, I'm cranking the case blades on full throttle. And those are pretty capable fans. So gotta take care of general cooling, or things might get cooked on longer run.

[bitken]

Will these be on the case? Didn't see mention of that.

Personally, have the same motherboard, most likely hotter gpu (tahiti le) and atx midi case with 3 12mm fans in push pull configuration and it doesn't seem to gather that much heat running couple days straight as a miner. But each time I hit the miner, I'm cranking the case blades on full throttle. And those are pretty capable fans. So gotta take care of general cooling, or things might get cooked on longer run.

I plan to use a table fan. But will the direction of the wind blow towards the GPU does the GPU's fan a bad thing? I'm not sure if the GPU fan is fanning clockwise or vice versa.

[stulowe]

It'll work fine and give you about 600kh/s for scrypt based mining.