To phil and citronick and any other moderately large miners by yourself, how do you guys have all this stuff setup? I have two miners going in my basement, but i'm basically out of breakers that I can hook up so much wattage to. Do you guys run all this stuff at home? Do you rent space somewhere? Do you have a massive breaker box that's just full of extra breakers for more computers? I am constantly wanting to expand but find power delivery to be a major limiting factor in the future.
I could be an ass and say read all five threads and the info is there or google is your best friend. but I will give you the abc for usa mining.
your home uses 120 volt but there is a huge chance you can upgrade 1 circuit to 240 volts.
in the garage the basement the attic with a good fan somewhere to no have to hear the noise.
a 30 amp 240 volt circuit will max at 30 x 240 = 7200 watts derate by 80% for 24/7/365 running and you have
.8 x 7200 = 5760 watts
that would be enough for five 1100 watt rigs.
that circuit is wired with 10 gauge wire to a plug like this
https://www.amazon.com/Leviton-2620-Receptacle-Industrial-Grounding/dp/B00002NAT9/ref=sr_1_2?
with a plate like this
https://www.amazon.com/Leviton-84020-40-Receptacle-Wallplate-Stainless/dp/B000HEFFIQ/ref=pd_bxgy_60_img_3?
next a pdu
https://www.amazon.com/CyberPower-PDU30BHVT8R-8-Outlets-L6-30P-Distribution/dp/B003KBIEGS/ref=pd_sbs_23_2?then some cables
https://www.amazon.com/Tripp-Lite-IEC-320-C14-IEC-320-C13-P005-006/dp/B0027JTJ22/ref=sr_1_3?most usa homes could do this if they are newer say 1990 or newer. with a 150amp or higher circuit box.
