[ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows)

[agente]

Will your parameter settings?
My GTX 1060 3GB = 260 Sol/s?

I think this is stock params. 1050Ti = 180 sol/s with default settings ("from box") and 192 with +200 core +500 memory.

260 for 1060 - too low rate. What you have OS and drivers? PCIe clock has right value in BIOS?

PCIe clock used? GEN2?

[1714034188]

1714034188

[1714034188]

1714034188

[1714034188]

1714034188

[1714034188]

1714034188

[tbearhere]

Can someone please post the hashrate for a 750ti.  thx  

55 sol/s for the 750 non Ti at minimal settings (30 W) in Linux.

Ha, I too think that my 750 consumes 38 watt (as say nvidia-smi). But wattmeter show other value - ~60 watt  

67 sol/s (with "intensity=1:0.95" in zm.cfg) and 72 with full load. (+135 core, +0 mem)

Also:
gtx950 - 152 sol/s (+200 +500)
gtx1050Ti - 192 (+200 +500)

dstm - rulez  

Thx everyone .... on ewbf I get 72 sols.... so no real improvement with dstm on windows.

[AzzAz]

Can someone please post the hashrate for a 750ti.  thx  

I mined on 750, but on ewbf (I tried to mine on 660 on dstm and it crashes) and it was around 60 sol.
I think that if dstm will works on it, it will be around 75-80 sol. You will mine 0.01 zec in two weeks.
IMHO

70 sol, 8 card rig is at 550 ish

Fresh reinstall, 388.13 driver ( windows did it) all default, DSTM 6.0 reports 594 +-3 (8 asus 750Ti ), so it's closer to 75. Almost 5%; and will se @ the pool

[Jonathan_Swan]

Hi Guys, I'm having a few problems with my DSTM miner and wondered if any of you have come across the error before. Unfortunately my mining keeps getting interrupted every minute or so with the following error:

recv failed: 10054

https://ibb.co/f5Dn6n

any help/suggestions would be much appreciated, I have already tried alternate pools so I have ruled that out. I may try another miner but from what I've heard DSTM is the best for equihash so i'd much rather stick with it. Any ideas??

[blackjec]

Hi Guys, I'm having a few problems with my DSTM miner and wondered if any of you have come across the error before. Unfortunately my mining keeps getting interrupted every minute or so with the following error:

recv failed: 10054

https://ibb.co/f5Dn6n

any help/suggestions would be much appreciated, I have already tried alternate pools so I have ruled that out. I may try another miner but from what I've heard DSTM is the best for equihash so i'd much rather stick with it. Any ideas??

"10054 - Remote host drop established connection". This is network trouble. You use GPRS/3G/4G?

[Jonathan_Swan]

Hi Guys, I'm having a few problems with my DSTM miner and wondered if any of you have come across the error before. Unfortunately my mining keeps getting interrupted every minute or so with the following error:

recv failed: 10054

https://ibb.co/f5Dn6n

any help/suggestions would be much appreciated, I have already tried alternate pools so I have ruled that out. I may try another miner but from what I've heard DSTM is the best for equihash so i'd much rather stick with it. Any ideas??

"10054 - Remote host drop established connection". This is network trouble. You use GPRS/3G/4G?

Thanks for the swift response, I'm currently using USB wifi to connect to the internet as I don't have ethernet available. I'll have a look into trouble shooting the network, thanks again!

[chaostic]

Check you're firewall settings, if you run a Asus router or equivalent with any trend micro, or overdone security that will do that man, and yea I've tested all miners dstm/zm is the best.

[SpecterHome]

Hi Guys, I'm having a few problems with my DSTM miner and wondered if any of you have come across the error before. Unfortunately my mining keeps getting interrupted every minute or so with the following error:

recv failed: 10054

https://ibb.co/f5Dn6n

any help/suggestions would be much appreciated, I have already tried alternate pools so I have ruled that out. I may try another miner but from what I've heard DSTM is the best for equihash so i'd much rather stick with it. Any ideas??

WiFi is evil for mining. I change my usb WiFi because of lot "recv failed" to a high power wifi adapter on a wire (about 1 meter from farm) but "recv failed" was still my guest.
Now I connect two my farms with shielded cable cat.6. Much less "recv failed". (1 at week)
Only cable. If you cant connect cable, take you farm to the router.
By the way I use Tp-Link 3600 with OpenWRT on board.

[blackjec]

Hi Guys, I'm having a few problems with my DSTM miner and wondered if any of you have come across the error before. Unfortunately my mining keeps getting interrupted every minute or so with the following error:

recv failed: 10054

https://ibb.co/f5Dn6n

any help/suggestions would be much appreciated, I have already tried alternate pools so I have ruled that out. I may try another miner but from what I've heard DSTM is the best for equihash so i'd much rather stick with it. Any ideas??

WiFi is evil for mining.

Yes. Wireless connection good for tits, cats, and stupid youtube movies. For stable works - wire only, without variants.

[Mark899]

Is there a viewable saved log for DTSM?

One of my rigs runs Win 7, and the program doesn't hold information in the window as long as Win 10.

I'm getting rejected shares here and there. I wanna button that down, but by the time I realize I have one, it's removed and I can't see which cards I need to back off the OC.

[Xman79]

Any info about dstm v7 ?

[nazzer]

Any info about dstm v7 ?

Next version is 0.6.1:

Hi DSTM,

Can you please add --PEC option as on EWBF cuda miner.

--pec shows you gpu wat usage as well as sols per watt.


Thank you!

You already have sols per watt, but the power consumption in watts would be nice.
What do you think DSTM?

ZM will report the power consumption of each GPU in 0.6.1

Very nice feature :-).
Any hahsrate improvement is possible ?

Yes, I'm currently testing architectural changes which improve performance on linux systems.
Future releases will contain the changes if there are no stability issues with them.

[froggy007]

Hello dstm.
I use Ethos with 8x Zotac GTX 1080 TI 11Gb Mini and dstm-zcash 0.6.0.1 and trying to use the temp-target function:
dstm-zcash=flags -temp-target 0:65,1:65,2:65,3:65,4:65,5:65,6:65,7:65 and the log says for example gpu0 reached target temperature 65 and the rig restarts
Is the function working ? How to use ? Plese help.

[dstm]

Is there a viewable saved log for DTSM?

One of my rigs runs Win 7, and the program doesn't hold information in the window as long as Win 10.

I'm getting rejected shares here and there. I wanna button that down, but by the time I realize I have one, it's removed and I can't see which cards I need to back off the OC.

You can enable logfile output by using the '--logfile' option. It's usage is described in 'readme.txt'.
You can also change the size of the terminal window on win7 - you have to right-clicking on the terminal-window-bar and select properties.

[dstm]

Any info about dstm v7 ?

I'm working on it - I hope to be able to release it in 2 weeks.

[dstm]

Hello dstm.
I use Ethos with 8x Zotac GTX 1080 TI 11Gb Mini and dstm-zcash 0.6.0.1 and trying to use the temp-target function:
dstm-zcash=flags -temp-target 0:65,1:65,2:65,3:65,4:65,5:65,6:65,7:65 and the log says for example gpu0 reached target temperature 65 and the rig restarts
Is the function working ? How to use ? Plese help.

'temp-target' works like this: if the GPU reaches the temp-target zm starts to submit less work to the GPU which causes the GPU-utilization to go down. ZM monitors the temperature and adjusts the amount of submitted work such that the temperature stays around the value you have set.

Some operating systems are setup such that they reboot if the GPU utilization goes down. I'm not sure if this is the case for Ethos but this might be the reason why your rig reboots after one of your GPUs reaches the temp-target.

[alltero]

Any info about dstm v7 ?

I'm working on it - I hope to be able to release it in 2 weeks.

  this is good news!
more power is expected in version v 0.7?

[Deathman20]

Hi Guys, I'm having a few problems with my DSTM miner and wondered if any of you have come across the error before. Unfortunately my mining keeps getting interrupted every minute or so with the following error:

recv failed: 10054

https://ibb.co/f5Dn6n

any help/suggestions would be much appreciated, I have already tried alternate pools so I have ruled that out. I may try another miner but from what I've heard DSTM is the best for equihash so i'd much rather stick with it. Any ideas??

WiFi is evil for mining.

Yes. Wireless connection good for tits, cats, and stupid youtube movies. For stable works - wire only, without variants.

Now if you can avoid it, yes Wireless isn't good for everything.  Though I've had a rig, now going on 6+ months, wireless only.  Works perfectly fine delivering results.

BTW updated to 0.6 now, really haven't noticed any difference on my side of things.
2x 1060 6GB (80%, 235+ Core, 400+ Mem) average me around 325 Sols each.
1x 1080TI (90%, 200+ Core, 500+ Mem) averages me still around 750 Sols.

Though playing with my 1060's a little more recently since I was able to drop the run temps by almost 10C, figured I could get a little more out of them.  Very happy with the setups and up times.  30+ days straight on my 1060 rig before I started tweaking, case switch and windows updates.

[EDIIIZ]

Great Miner👍

[Nvid]

I am using DSTM to all my rigs. I am mining with 55 gpus NVIDIA only.

One of my rig is constantly crashing - "cuda 1 memory failed". It has 6 msi armor 1060 6gbs.

I have tried almost all clocks in order to stabilise it.
Now I am running with no clocks only 80% power limit and it keeps crashing. I noted that when temp limit is set to 70C rig is more stable.

Can you please someone assist me as I am desperate for help. Please help me what can be the problem here?!

Regards,
Hristo