dodgertc
Newbie
Offline
Activity: 29
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 15, 2018, 07:17:36 AM Last edit: May 15, 2018, 07:30:24 AM by dodgertc |
|
very buggy release. i am using hiveos. dstm 0.6.1.
1. gtx1080ti has hashrate around 200 sols 2. ping problem (already reported here before)
Same problem here... With gtx 1060, dstm 0.6.0 i get ~300 sol/s. Now with dstm 0.6.1 i get around 200 sol/s . Whats wrong? https://i.imgur.com/UKFqQvW.pngyes i can confirm that. are those AMD machines ? i have the same effect on 2 other of these cheap AMD machines, but on the modern intel machine with gigabyte D3A H110 it has no issues and the 0.6.1 performs slightly better. this is with 0.6 (and its even warm). GPU1 56C Sol/s: 491.0 Sol/W: 4.33 Avg: 487.8 I/s: 261.2 Sh: 0.39 0.99 116 GPU0 60C Sol/s: 710.1 Sol/W: 3.58 Avg: 715.4 I/s: 383.2 Sh: 0.58 1.00 112 GPU3 60C Sol/s: 489.1 Sol/W: 4.33 Avg: 487.8 I/s: 261.2 Sh: 0.40 1.00 113 GPU2 52C Sol/s: 493.4 Sol/W: 4.36 Avg: 490.8 I/s: 262.8 Sh: 0.43 0.99 112 GPU4 61C Sol/s: 740.6 Sol/W: 3.68 Avg: 732.8 I/s: 392.4 Sh: 0.63 0.99 112 ========== Sol/s: 2924.2 Sol/W: 4.06 Avg: 2914.7 I/s: 1560.8 Sh: 2.41 0.99 113 this is with 0.6.1 just started (so would get lower in a bit) _ GPU0 58C 80% | 678.2 Sol/s 678.2 Avg 364.9 I/s | 3.44 S/W 202 W | 0.00 . . _ GPU1 55C 80% | 474.4 Sol/s 474.4 Avg 254.7 I/s | 4.22 S/W 117 W | 0.00 . . _ GPU2 50C 80% | 476.2 Sol/s 476.2 Avg 253.9 I/s | 4.31 S/W 104 W | 0.00 . . _ GPU3 58C 80% | 462.7 Sol/s 462.7 Avg 249.3 I/s | 4.15 S/W 110 W | 0.00 . . _ GPU4 58C 80% | 747.1 Sol/s 747.1 Avg 402.5 I/s | 3.78 S/W 179 W | 2.99 100 113 ============== | 2838.7 Sol/s 2838.7 Avg 1525.3 I/s | 3.98 S/W 713 W | 2.99 100 113 hwinfo: (its obviously one of my low ROI machines where i use an older downclocked energy save cpu, mb + mem in combination with a 1to4 pci extender. works flawlessly though. its 2x 1080ti 3x1070ti config. OS is SmOS. Linux simpleminer 4.11.12-041112-generic #201707210350 SMP Fri Jul 21 07:53:15 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 2 Core(s) per socket: 2 Socket(s): 1 NUMA node(s): 1 Vendor ID: AuthenticAMD CPU family: 21 Model: 48 Model name: AMD A8-7600 Radeon R7, 10 Compute Cores 4C+6G Stepping: 1 CPU MHz: 1400.000 CPU max MHz: 2800.0000 CPU min MHz: 1400.0000 BogoMIPS: 4990.45 Virtualization: AMD-V L1d cache: 16K L1i cache: 96K L2 cache: 2048K NUMA node0 CPU(s): 0-3
cheers
|
|
|
|
oberrz
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 15, 2018, 04:32:29 PM |
|
How to use intensity ?? Could you give more detailed manual ?
|
|
|
|
blackjec
Newbie
Offline
Activity: 20
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 15, 2018, 05:08:49 PM |
|
New Version 0.6.1 ... - improve performance on linux systems by ~2%
You apply 2 queue per GPU, right? Make please option for switch between old/new modes for selected card. For example - like "dev=0,1,2" for old mode and "dev=0,0,1,2,2" for new mode (card 0 and 2 - 2 thread/GPU, card 1 - 1 thread/GPU) Also, with v6.1: gtx750 - SM5.0 - same performance, +1..2 sols/sec gtx950 - SM5.2 - yes, +2% faster gtx1050ti - SM6.1 - 1-2% SLOWER Rollback to v6.0 ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) Thx for reporting performance measurements. +1-2 Sol/s on an gtx750 are about +2%. gtx1050ti / sm6.1: There is nothing special about sm6.1 in respect to this optimization. That's not what I'm getting. Could you pls provide the log files of your tests? A run of 5min (for 0.6/0.6.1) should be enough on a previously cooled down system. Sorry, I was wrong. I retest again (some hours) and get next average values: gtx750 67 -> 67 gtx950 153 -> 155 ~1.5% gtx1050ti 191 -> 192 total 412 -> 415
|
|
|
|
chrysophylax
Legendary
Offline
Activity: 2870
Merit: 1091
--- ChainWorks Industries ---
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 15, 2018, 06:09:13 PM |
|
Seems to hash reasonably well ...
Will try out the Linux version shortly.
#crysx
|
|
|
|
Biggen1
Newbie
Offline
Activity: 64
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 12:32:50 AM |
|
Looking good so far on Ubuntu Server 16.04. I am seeing the slight performance bump. Keep up the good work. Been running your miner since December and have NEVER had a crash. I only shut down to apply patches once a month and I'm back up and running within 10 minutes after that. GPU0 64C 37% | 515.6 Sol/s 511.3 Avg 273.9 I/s | 3.94 S/W 128 W | 0.21 100 176 GPU1 61C 34% | 491.3 Sol/s 503.8 Avg 266.4 I/s | 3.90 S/W 134 W | 0.21 100 171 GPU2 61C 34% | 507.7 Sol/s 506.5 Avg 271.0 I/s | 3.92 S/W 130 W | 0.00 . . GPU3 55C 27% | 499.5 Sol/s 503.7 Avg 270.0 I/s | 3.91 S/W 125 W | 0.64 100 176 GPU4 63C 36% | 509.4 Sol/s 506.4 Avg 270.9 I/s | 3.91 S/W 129 W | 0.21 100 177 GPU5 62C 35% | 510.1 Sol/s 511.6 Avg 272.7 I/s | 3.96 S/W 131 W | 0.43 100 176 GPU6 62C 34% | 503.2 Sol/s 506.3 Avg 270.9 I/s | 3.92 S/W 127 W | 0.43 100 176 GPU7 59C 31% | 514.1 Sol/s 508.1 Avg 272.9 I/s | 3.93 S/W 133 W | 0.64 100 173 ============== | 4050.8 Sol/s 4057.8 Avg 2168.8 I/s | 3.93 S/W 1039 W | 2.78 100 175
|
|
|
|
oliverlj
Newbie
Offline
Activity: 4
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 06:33:54 AM |
|
I have performance issue on 0.6.1 as well : 0.6.0 : 2018-05-16 08:29:40| GPU2 55C Sol/s: 433.5 Sol/W: 3.65 Avg: 437.7 I/s: 236.2 Sh: 0.90 1.00 71 2018-05-16 08:29:40| GPU0 52C Sol/s: 453.7 Sol/W: 3.77 Avg: 449.3 I/s: 237.7 Sh: 1.50 1.00 71 + 2018-05-16 08:29:41| GPU1 49C Sol/s: 445.0 Sol/W: 3.69 Avg: 441.4 I/s: 237.4 Sh: 2.39 1.00 71 ++ 2018-05-16 08:29:42| GPU3 45C Sol/s: 452.8 Sol/W: 3.71 Avg: 445.3 I/s: 238.6 Sh: 1.19 1.00 71 2018-05-16 08:29:43| GPU4 50C Sol/s: 471.4 Sol/W: 3.87 Avg: 462.9 I/s: 248.3 Sh: 3.28 1.00 72 2018-05-16 08:29:45| GPU5 51C Sol/s: 466.2 Sol/W: 3.89 Avg: 464.1 I/s: 247.8 Sh: 2.39 1.00 71 + 2018-05-16 08:29:47| GPU6 48C Sol/s: 461.2 Sol/W: 3.87 Avg: 461.4 I/s: 245.9 Sh: 2.09 1.00 71 + 2018-05-16 08:29:47| ========== Sol/s: 3183.7 Sol/W: 3.78 Avg: 3162.2 I/s: 1691.9 Sh: 13.74 1.00 71
0.6.1 : 2018-05-16 08:32:46| GPU0 50C 50% | 206.1 Sol/s 211.9 Avg 110.3 I/s | 2.01 S/W 107 W | 0.00 . . 2018-05-16 08:32:46| GPU1 48C 50% | 417.7 Sol/s 422.9 Avg 226.7 I/s | 3.51 S/W 121 W | 1.71 100 71 2018-05-16 08:32:46| GPU2 47C 50% | 162.1 Sol/s 171.1 Avg 89.3 I/s | 1.73 S/W 93 W | 1.29 100 72 2018-05-16 08:32:46| GPU3 44C 50% | 431.6 Sol/s 429.5 Avg 227.9 I/s | 3.56 S/W 122 W | 3.41 100 278 ++ 2018-05-16 08:32:46| GPU4 44C 50% | 158.6 Sol/s 159.4 Avg 82.8 I/s | 1.80 S/W 83 W | 0.48 100 71 2018-05-16 08:32:46| GPU5 50C 50% | 437.5 Sol/s 440.9 Avg 234.4 I/s | 3.66 S/W 120 W | 2.34 100 71 + 2018-05-16 08:32:47| GPU6 44C 50% | 198.9 Sol/s 204.0 Avg 107.9 I/s | 1.93 S/W 111 W | 1.70 100 70 2018-05-16 08:32:47| ============== | 2012.5 Sol/s 2039.8 Avg 1079.3 I/s | 2.60 S/W 760 W | 10.93 100 105
the config is 7 * msi gaming 1070 on ubuntu 18.04, nvidia drive 390.48
|
|
|
|
Morbias
Newbie
Offline
Activity: 23
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 08:43:15 AM |
|
I have performance issue on 0.6.1 as well : 0.6.0 : 2018-05-16 08:29:40| GPU2 55C Sol/s: 433.5 Sol/W: 3.65 Avg: 437.7 I/s: 236.2 Sh: 0.90 1.00 71 2018-05-16 08:29:40| GPU0 52C Sol/s: 453.7 Sol/W: 3.77 Avg: 449.3 I/s: 237.7 Sh: 1.50 1.00 71 + 2018-05-16 08:29:41| GPU1 49C Sol/s: 445.0 Sol/W: 3.69 Avg: 441.4 I/s: 237.4 Sh: 2.39 1.00 71 ++ 2018-05-16 08:29:42| GPU3 45C Sol/s: 452.8 Sol/W: 3.71 Avg: 445.3 I/s: 238.6 Sh: 1.19 1.00 71 2018-05-16 08:29:43| GPU4 50C Sol/s: 471.4 Sol/W: 3.87 Avg: 462.9 I/s: 248.3 Sh: 3.28 1.00 72 2018-05-16 08:29:45| GPU5 51C Sol/s: 466.2 Sol/W: 3.89 Avg: 464.1 I/s: 247.8 Sh: 2.39 1.00 71 + 2018-05-16 08:29:47| GPU6 48C Sol/s: 461.2 Sol/W: 3.87 Avg: 461.4 I/s: 245.9 Sh: 2.09 1.00 71 + 2018-05-16 08:29:47| ========== Sol/s: 3183.7 Sol/W: 3.78 Avg: 3162.2 I/s: 1691.9 Sh: 13.74 1.00 71
0.6.1 : 2018-05-16 08:32:46| GPU0 50C 50% | 206.1 Sol/s 211.9 Avg 110.3 I/s | 2.01 S/W 107 W | 0.00 . . 2018-05-16 08:32:46| GPU1 48C 50% | 417.7 Sol/s 422.9 Avg 226.7 I/s | 3.51 S/W 121 W | 1.71 100 71 2018-05-16 08:32:46| GPU2 47C 50% | 162.1 Sol/s 171.1 Avg 89.3 I/s | 1.73 S/W 93 W | 1.29 100 72 2018-05-16 08:32:46| GPU3 44C 50% | 431.6 Sol/s 429.5 Avg 227.9 I/s | 3.56 S/W 122 W | 3.41 100 278 ++ 2018-05-16 08:32:46| GPU4 44C 50% | 158.6 Sol/s 159.4 Avg 82.8 I/s | 1.80 S/W 83 W | 0.48 100 71 2018-05-16 08:32:46| GPU5 50C 50% | 437.5 Sol/s 440.9 Avg 234.4 I/s | 3.66 S/W 120 W | 2.34 100 71 + 2018-05-16 08:32:47| GPU6 44C 50% | 198.9 Sol/s 204.0 Avg 107.9 I/s | 1.93 S/W 111 W | 1.70 100 70 2018-05-16 08:32:47| ============== | 2012.5 Sol/s 2039.8 Avg 1079.3 I/s | 2.60 S/W 760 W | 10.93 100 105
the config is 7 * msi gaming 1070 on ubuntu 18.04, nvidia drive 390.48 I have the same in few rigs, 8x1070 EVGA
|
|
|
|
xyburcoin
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 12:56:43 PM |
|
Thank you guys! Very good result for my rig 6x 1070ti
Equihash algoritm: Average rate - 3.38 KSol/s Energy per card - Sol/w 4.20
nice results... how did you do that? care to share your config? Thanks.
|
Life is ours, we live it our way.
|
|
|
dstm (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 01:06:37 PM |
|
So i get a strange thing happening in 6.1. I have two 1080ti's on my comp and when i run my second card by itself the output shows only the first line of hash info and then stops displaying any info except for difficulty changes. The card is hashing and is reporting on the pool but the output display just shows the difficulty changes. If i run my first card by itself and if i run the two cards together they output fine just how they are suppose to.. Must be a little glitch with running dev 1 only i guess. Anyone else running into this? Great miner by the way.. https://imgur.com/a/BP5ulKBThx, fixed.
|
|
|
|
dstm (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 01:07:25 PM |
|
For people having performance issues on 0.6.1/linux. Is there a significant CPU-load difference between 0.6 / 0.6.1 on your systems?
|
|
|
|
chaostic
Newbie
Offline
Activity: 22
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 06:38:18 PM |
|
Thank you guys! Very good result for my rig 6x 1070ti
Equihash algoritm: Average rate - 3.38 KSol/s Energy per card - Sol/w 4.20
to get 4 souls/watt on a 1070 ti, means you have the TPD about 58-60% lol you should post you're config cause I just dont see that type of hash rate with that low of TPD.
|
|
|
|
HashAuger
Newbie
Offline
Activity: 481
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 07:03:05 PM |
|
New Version 0.6.1 - support configuration of 'temp-target', 'intensity', 'pool' via cmd-line parameters
DSTM, thanks for the new version. I haven't had any issues with latency on MiningPoolHub, ZPool or NiceHash using Windows 10. However, I do have a quick question regarding latency. Is 1.0 the default value? Based on my limited testing, I am assuming it is as any lower value reduces the hash rate, but I would like a quick confirmation of that. Thanks.
|
|
|
|
wi7chking
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 07:31:15 PM |
|
For people having performance issues on 0.6.1/linux. Is there a significant CPU-load difference between 0.6 / 0.6.1 on your systems?
Hi DSTM, I noticed quite a difference in CPU usage between 0.6.0 and 0.6.1 running on vanilla Debian 9.4 (Stretch). Here it goes: https://imgur.com/a/lNtcqlCI measured the CPU usages with top over a period of time (around 1 minute or so) and took the average. The behaviour of 0.6.1 running on my miner is that the last GPU (GPU4) is running at 75% of its capacity. This rig has 4 GTX 1070 and 1 GTX 1080. One of the 1070s is GPU4. That's quite odd (considering the high CPU usage of kworker and some IRQs as well with 0.6.1). GPU Overclock, memory clock, power limit have been kept identical in the two runs (0.6.0 vs 0.6.1). The only actual difference is zm executable version. Hope it helps. Meanwhile, I reverted to 0.6.0 that uses less CPU and provides a higher combined hashrate on my rig. Thanks for your good work! Cheers!
|
|
|
|
dstm (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 08:00:34 PM |
|
New Version 0.6.1 - support configuration of 'temp-target', 'intensity', 'pool' via cmd-line parameters
DSTM, thanks for the new version. I haven't had any issues with latency on MiningPoolHub, ZPool or NiceHash using Windows 10. However, I do have a quick question regarding latency. Is 1.0 the default value? Based on my limited testing, I am assuming it is as any lower value reduces the hash rate, but I would like a quick confirmation of that. Thanks. I guess you're talking about intensity not latency like you wrote. Intensity is only used to reduce the GPU load - if you don't set the '--intensity' option the intensity code path isn't used and zm will run as fast as possible.
|
|
|
|
dstm (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 08:01:04 PM |
|
For people having performance issues on 0.6.1/linux. Is there a significant CPU-load difference between 0.6 / 0.6.1 on your systems?
Hi DSTM, I noticed quite a difference in CPU usage between 0.6.0 and 0.6.1 running on vanilla Debian 9.4 (Stretch). Here it goes: https://imgur.com/a/lNtcqlCI measured the CPU usages with top over a period of time (around 1 minute or so) and took the average. The behaviour of 0.6.1 running on my miner is that the last GPU (GPU4) is running at 75% of its capacity. This rig has 4 GTX 1070 and 1 GTX 1080. One of the 1070s is GPU4. That's quite odd (considering the high CPU usage of kworker and some IRQs as well with 0.6.1). GPU Overclock, memory clock, power limit have been kept identical in the two runs (0.6.0 vs 0.6.1). The only actual difference is zm executable version. Hope it helps. Meanwhile, I reverted to 0.6.0 that uses less CPU and provides a higher combined hashrate on my rig. Thanks for your good work! Cheers! Thx, that's very helpful. For people who have performance issues and also have some time to test - pls pm me.
|
|
|
|
Keko Fdez
Jr. Member
Offline
Activity: 108
Merit: 7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 10:37:38 PM |
|
Thank you guys! Very good result for my rig 6x 1070ti
Equihash algoritm: Average rate - 3.38 KSol/s Energy per card - Sol/w 4.20
to get 4 souls/watt on a 1070 ti, means you have the TPD about 58-60% lol you should post you're config cause I just dont see that type of hash rate with that low of TPD. That is actually not true. I have 6 GTX 1070 Ti and get 4.12 sols/W average between the 6 cards and all of them are running at 70% TDP. The best one it is doing 4.23 sols/W. Have a look ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fibb.co%2FhE2D8y&t=665&c=HOoZVAxksa1F2w) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fibb.co%2FdgGUgJ&t=665&c=f1V3hLTRnGf4OQ) No need to go that low but still I am surprise about the performance difference on the hashrate. I average 3107 maximun 3111 and he is doing 200 more sols average. Are you using Windows or Linux? and what driver version?
|
|
|
|
Keko Fdez
Jr. Member
Offline
Activity: 108
Merit: 7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 16, 2018, 10:43:59 PM |
|
Thank you guys! Very good result for my rig 6x 1070ti
Equihash algoritm: Average rate - 3.38 KSol/s Energy per card - Sol/w 4.20
nice results... how did you do that? care to share your config? Thanks. I am sorry but 4 post and results nobody is near them with the same cards on different systems. I think you should upload a pic otherwise I just think you are pretty much bluffing... I have not seen anyone getting that high hashrate and sols/W with GTX 1070 Ti. That combination does not sound right to me
|
|
|
|
HashAuger
Newbie
Offline
Activity: 481
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 17, 2018, 12:04:59 AM |
|
New Version 0.6.1 - support configuration of 'temp-target', 'intensity', 'pool' via cmd-line parameters
DSTM, thanks for the new version. I haven't had any issues with latency on MiningPoolHub, ZPool or NiceHash using Windows 10. However, I do have a quick question regarding latency. Is 1.0 the default value? Based on my limited testing, I am assuming it is as any lower value reduces the hash rate, but I would like a quick confirmation of that. Thanks. I guess you're talking about intensity not latency like you wrote. Intensity is only used to reduce the GPU load - if you don't set the '--intensity' option the intensity code path isn't used and zm will run as fast as possible. Sorry about my typo. Yes, I meant intensity and not latency in the second sentence. That’s what I get for not proof-reading. Thanks for clarifying how your miner uses intensity. Other miners, such as CCMiner, use a default intensity that is often less than the maximum and I wanted to make sure that was not the case with DSTM. Keep up the good work.
|
|
|
|
Slukeass
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 17, 2018, 01:41:27 AM |
|
very buggy release. i am using hiveos. dstm 0.6.1.
1. gtx1080ti has hashrate around 200 sols 2. ping problem (already reported here before)
I would have to agree. Both of my rugs dropped 500 sols after jumping onto DSTM 0.6.1. I rolled back to 0.6 and my hash rates jumped up where they should be. I only have one rig near me but it’s not by a tv so I’m not sure how I can get the logs if you need them.
|
|
|
|
dodgertc
Newbie
Offline
Activity: 29
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
May 17, 2018, 08:07:35 AM |
|
very buggy release. i am using hiveos. dstm 0.6.1.
1. gtx1080ti has hashrate around 200 sols 2. ping problem (already reported here before)
Same problem here... With gtx 1060, dstm 0.6.0 i get ~300 sol/s. Now with dstm 0.6.1 i get around 200 sol/s . Whats wrong? https://i.imgur.com/UKFqQvW.pngyes i can confirm that. are those AMD machines ? i have the same effect on 2 other of these cheap AMD machines, but on the modern intel machine with gigabyte D3A H110 it has no issues and the 0.6.1 performs slightly better. this is with 0.6 (and its even warm). GPU1 56C Sol/s: 491.0 Sol/W: 4.33 Avg: 487.8 I/s: 261.2 Sh: 0.39 0.99 116 GPU0 60C Sol/s: 710.1 Sol/W: 3.58 Avg: 715.4 I/s: 383.2 Sh: 0.58 1.00 112 GPU3 60C Sol/s: 489.1 Sol/W: 4.33 Avg: 487.8 I/s: 261.2 Sh: 0.40 1.00 113 GPU2 52C Sol/s: 493.4 Sol/W: 4.36 Avg: 490.8 I/s: 262.8 Sh: 0.43 0.99 112 GPU4 61C Sol/s: 740.6 Sol/W: 3.68 Avg: 732.8 I/s: 392.4 Sh: 0.63 0.99 112 ========== Sol/s: 2924.2 Sol/W: 4.06 Avg: 2914.7 I/s: 1560.8 Sh: 2.41 0.99 113 this is with 0.6.1 just started (so would get lower in a bit) _ GPU0 58C 80% | 678.2 Sol/s 678.2 Avg 364.9 I/s | 3.44 S/W 202 W | 0.00 . . _ GPU1 55C 80% | 474.4 Sol/s 474.4 Avg 254.7 I/s | 4.22 S/W 117 W | 0.00 . . _ GPU2 50C 80% | 476.2 Sol/s 476.2 Avg 253.9 I/s | 4.31 S/W 104 W | 0.00 . . _ GPU3 58C 80% | 462.7 Sol/s 462.7 Avg 249.3 I/s | 4.15 S/W 110 W | 0.00 . . _ GPU4 58C 80% | 747.1 Sol/s 747.1 Avg 402.5 I/s | 3.78 S/W 179 W | 2.99 100 113 ============== | 2838.7 Sol/s 2838.7 Avg 1525.3 I/s | 3.98 S/W 713 W | 2.99 100 113 hwinfo: (its obviously one of my low ROI machines where i use an older downclocked energy save cpu, mb + mem in combination with a 1to4 pci extender. works flawlessly though. its 2x 1080ti 3x1070ti config. OS is SmOS. Linux simpleminer 4.11.12-041112-generic #201707210350 SMP Fri Jul 21 07:53:15 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 4 On-line CPU(s) list: 0-3 Thread(s) per core: 2 Core(s) per socket: 2 Socket(s): 1 NUMA node(s): 1 Vendor ID: AuthenticAMD CPU family: 21 Model: 48 Model name: AMD A8-7600 Radeon R7, 10 Compute Cores 4C+6G Stepping: 1 CPU MHz: 1400.000 CPU max MHz: 2800.0000 CPU min MHz: 1400.0000 BogoMIPS: 4990.45 Virtualization: AMD-V L1d cache: 16K L1i cache: 96K L2 cache: 2048K NUMA node0 CPU(s): 0-3
cheers as inquired the cpu usage of 0.6 and 0.6.1 related to above findings. 0.6.1 has higher peaks ie i see it peak to up to 50% cpu usage at least using "top". 0.6 Tasks: 162 total, 2 running, 160 sleeping, 0 stopped, 0 zombie %Cpu(s): 8.4 us, 10.5 sy, 0.0 ni, 81.0 id, 0.0 wa, 0.0 hi, 0.1 si, 0.0 st KiB Mem : 3963096 total, 2444388 free, 1108500 used, 410208 buff/cache KiB Swap: 0 total, 0 free, 0 used. 2497384 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 4087 miner 20 0 64.963g 588996 434516 S 40.2 14.9 1155:28 zm
0.6.1 Tasks: 169 total, 2 running, 167 sleeping, 0 stopped, 0 zombie %Cpu(s): 9.8 us, 22.1 sy, 0.0 ni, 68.1 id, 0.0 wa, 0.0 hi, 0.1 si, 0.0 st KiB Mem : 3963096 total, 2464964 free, 1085700 used, 412432 buff/cache KiB Swap: 0 total, 0 free, 0 used. 2519828 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 14325 miner 20 0 67.005g 567988 434928 S 40.5 14.3 0:31.95 zm
|
|
|
|
|